New subject: [Serusers] Routing multiple numbers to 1 account

25 Aug 2005


      The idea is not to query any tables as they are at different server but
use radius to provision aliases and then use lookup("aliases") I believe
there was a patch a way back for 8.12 but seems it did not found it way
to CVS
-----Original Message-----
From: Chris St Denis [mailto:chris@aebc.com] 
Sent: Wednesday, August 24, 2005 3:44 PM
To: Igor Balk; serusers@lists.iptel.org
Subject: RE: [Serusers] Routing multiple numbers to 1 account
This is basically the same as aliases.
Query the registration table. If its not found there push the AVP alias
into the ruri/username and lookup based on that. All aliases are is a
static registration table anyway I believe.
-----Original Message-----
From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Igor Balk
Sent: Wednesday, August 24, 2005 11:59 AM
To: serusers@lists.iptel.org
Subject: RE: [Serusers] Routing multiple numbers to 1 account
Guys, do any of you know if there is a way in SER to dynamically set up
aliases using radius? I'm trying to achieve similar results but with
aliases.
Thank you.
-----Original Message-----
From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Chris St Denis
Sent: Wednesday, August 24, 2005 1:26 PM
To: 'Erik Versaevel'; 'SER Users'
Subject: RE: [Serusers] Routing multiple numbers to 1 account
I am doing this by pulling the translation out of a database using
radius AVP (could be done direct to database too) and sticking it as the
destination.
It looks like this
# Try to lookup the number directly registered.
        if(!lookup("ser_location")) {
    	#Number isn't found, so try to do an avp translation on
it
            avp_pushto("$ruri/username", "s:callee_vdid");
            if(!lookup("ser_location")) { #Look up the new value
    		#Still can't find the user. Give up.
                    sl_send_reply("404", "I can't find 'em");
                    break;
            }
        }
-----Original Message-----
From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Erik Versaevel
Sent: Wednesday, August 24, 2005 6:49 AM
To: SER Users
Subject: [Serusers] Routing multiple numbers to 1 account
Hello all,
At this moment i'm using the full e164 numbers as account's in ser, that
is for every number someone wants delivered to them they would have to
register it using the account details.
This however poses a problem with a 100 bock of numbers for example
while a device can only register a few of them so what i would like to
do is mimic the asterisk like dial(SIP/number@sipppeer) in SER. That way
the devices only has to register once and recieves the number dialed in
the incomming INVITE.  If i use aliases to alias numbers to 1 account
the account allways recieves it's own registered contact instead of the
number dialed, is there any way to support number blocks in this way?
For example:
Device registeres as device_1@sipserver with contact
device_1@device_ip:port SER gets invite for number in the block of
device_1 and sends the invite as dialed_number@device_ip:port instead of
device_1@device_ip:port
Kind reagards,
Erik Versaevel
_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers