I can make calls from a public UA registered with SER to an internal UA registered with Asterisk. The problem is the call tear-down; when I hang up from the public side, the call is torn down properly but when I hang up from the private side, the public UA never gets the BYE packet.
When I capture the sip packets from the public UA I get this:
192.168.20.242 -> 65.126.236.148 SIP/SD Request: INVITE sip:0509@pbx.nexusmgmt.com, with session description 65.126.236.148 -> 192.168.20.242 SIP Request: OPTIONS sip:nexphone.nexusmgmt.com 65.126.236.148 -> 192.168.20.242 SIP Status: 100 trying -- your call is important to us 65.126.236.148 -> 192.168.20.242 SIP Status: 404 User Not Found 65.126.236.148 -> 192.168.20.242 SIP 180 Ringing 65.126.236.148 -> 192.168.20.242 SIP/SD Status: 200 OK, with session description 192.168.20.242 -> 65.126.236.148 SIP Request: ACK sip:65.126.236.148;r2=on
When I hang up from the outside I get: 192.168.20.242 -> 65.126.236.148 SIP Request: BYE :65.126.236.148;r2=on 65.126.236.148 -> 192.168.20.242 SIP Status: 200 OK
I am most worried about the 404 packet; my guess is that it is where the session breaks. It has these headers: From: sip:admin@nexphone.nexusmgmt.com To: sip:nexphone.nexusmgmt.com
Warning: 392 65.126.236.148:5060 "Noisy feedback tells: pid=23798 req_src_ip=80.176.149.91 req_src_port=5060 in_uri=sip:nexphone.nexusmgmt.com out_uri=sip:nexphone.nexusmgmt.com via_cnt==1"
I can't work out why the public UA should send a packet to sip:nexphone.nexusmgmt.com instead of sip:0509@pbx.nexusmgmt.com.
I attach my config files and the SIP packets from the network sniffer.
Thanks,
Bart...
-----Original Message----- From: Brett N [mailto:brettlist@nemeroff.com] Sent: 14 March 2006 16:03 To: Vitaly Nikolaev Cc: Bart J. Smit; serusers@lists.iptel.org Subject: RE: [Serusers] Sample SER + Asterisk conf?
That really shouldn't be necessary. Make sure the approproate domains or IPs are listed as "aliases" in ser.cfg.
What is the problem you are having? Perhaps if you tell us what is wrong, we can help fix it?
On Tue, March 14, 2006 9:03 am, Vitaly Nikolaev wrote:
I had a problem long time ago with 0.8.14m that ser and asterisk (or
any
b2bua) can not work on same IP address on different ports, somewhere
in
the logic of ser it mistakes in "if myself" function, and since then I always have them on same server but different IP addresses....
You might try it
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org]
On
Behalf Of Bart J. Smit Sent: Tuesday, March 14, 2006 9:59 AM To: serusers@lists.iptel.org Subject: [Serusers] Sample SER + Asterisk conf?
I'm still having problems with ser and asterisk on the same public server.
Could anybody send me a tarball of their ser.cfg and sip.conf
off-list,
so I can do a sanity check against my files?
Much appreciated.
Bart...
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Bart J. Smit