31 May
2005
31 May
'05
11:39 p.m.
Hi list !
I have a Problem with the appending of an rpid with the
functions avp_load_radius(), append_rpid_hf().
In my Radius DB i have an SIP-AVP field which is filled with the Value
rpid:[NUMBER]
When i run manuall the Radius Reply-Query i get the correct value for
SIP-AVP.
Now, i reconfigured my ser.cfg so that an avp_load_radius() is executed
after an incoming INVITE.
My Radius is answering on the command and sends the correct SIP-AVP
Value for the User.
Now my Problem:
I can't append the RPID or anything else to the SIP-Header after the
answer from the Radius.
So the call is going out without the rpid in the Header.
Can anyone help me ?
Here is the Configure-Snip:
if (method=="INVITE") { # here comes the invite
if (!radius_proxy_authorize("")) { # for the digest avp_load_radius it
seems that i must use an proxy auth
proxy_challenge("","0"); # and an proxy challenge
if(!avp_load_radius("digest")) { # here i get the SIP-AVP from the
radius
log(1,"Failure with the AVP-Value\n"); # if it fails i'll get a
message
break; # go out
}
avp_print(); # print all avp's (this command is never executed :( )
append_hf ("Remote-Party-ID: 111222333\r\n"); # append this silly row
- it is never executed
append_rpid_hf("",
";party=calling;id-type=subscriber;screen=yes"); #
append the rpid from SIP-AVP - and this command is also never executed
break; # go out
};
route(3); # go to route block 3
break; # end
}
I tried also this snippet without the breaks and proxy-commands but it
doesn't work.
I don't know what is wrong - please help me :s
Thanks !
Dirk
31 May
31 May
11:51 p.m.
The change done to ser 0.9.0 where Sip-Rpid RADIUS avpair was changed to
Sip-AVP=rpid:number was rolled back. I believe CVS head has this change
(though backwards compatible). Hence: Use Sip-Rpid=number instead of
SIP-AVP=rpid:number.
g-)
Dirk Willbrandt wrote:
Hi list !
I have a Problem with the appending of an rpid with the
functions avp_load_radius(), append_rpid_hf().
In my Radius DB i have an SIP-AVP field which is filled with the Value
rpid:[NUMBER]
When i run manuall the Radius Reply-Query i get the correct value for
SIP-AVP.
Now, i reconfigured my ser.cfg so that an avp_load_radius() is
executed after an incoming INVITE.
My Radius is answering on the command and sends the correct SIP-AVP
Value for the User.
Now my Problem:
I can't append the RPID or anything else to the SIP-Header after the
answer from the Radius.
So the call is going out without the rpid in the Header.
Can anyone help me ?
Here is the Configure-Snip:
if (method=="INVITE") { # here comes the invite
if (!radius_proxy_authorize("")) { # for the digest avp_load_radius
it seems that i must use an proxy auth
proxy_challenge("","0"); # and an proxy challenge
if(!avp_load_radius("digest")) { # here i get the SIP-AVP from
the radius
log(1,"Failure with the AVP-Value\n"); # if it fails i'll get
a message
break; # go out
}
avp_print(); # print all avp's (this command is never executed
:( ) append_hf ("Remote-Party-ID: 111222333\r\n"); # append this
silly row - it is never executed
append_rpid_hf("",
";party=calling;id-type=subscriber;screen=yes"); # append the rpid
from SIP-AVP - and this command is also never executed break; #
go out };
route(3); # go to route block 3
break; # end
}
I tried also this snippet without the breaks and proxy-commands but it
doesn't work.
I don't know what is wrong - please help me :s
Thanks !
Dirk
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
1 Jun
1 Jun
10:59 a.m.
Hi Greger,
Hi list,
I'm using the CVS Version from yesterday.
I tried the Sip-Rpid=number but i get the same problem.
Yesterday i tried some other things, append some hfs at another place
and so on.
I can append a hf before the invite and befor the
radius_proxy_authorize() but when i copy the append-row after the proxy
authorize it seems that it would never be executed. Why ?
Thanks
Dirk
Greger V. Teigre wrote:
The change done to ser 0.9.0 where Sip-Rpid RADIUS
avpair was changed
to Sip-AVP=rpid:number was rolled back. I believe CVS head has this
change (though backwards compatible). Hence: Use Sip-Rpid=number
instead of SIP-AVP=rpid:number.
g-)
Dirk Willbrandt wrote:
Hi list !
I have a Problem with the appending of an rpid with the
functions avp_load_radius(), append_rpid_hf().
In my Radius DB i have an SIP-AVP field which is filled with the Value
rpid:[NUMBER]
When i run manuall the Radius Reply-Query i get the correct value for
SIP-AVP.
Now, i reconfigured my ser.cfg so that an avp_load_radius() is
executed after an incoming INVITE.
My Radius is answering on the command and sends the correct SIP-AVP
Value for the User.
Now my Problem:
I can't append the RPID or anything else to the SIP-Header after the
answer from the Radius.
So the call is going out without the rpid in the Header.
Can anyone help me ?
Here is the Configure-Snip:
if (method=="INVITE") { # here comes the invite
if (!radius_proxy_authorize("")) { # for the digest avp_load_radius
it seems that i must use an proxy auth
proxy_challenge("","0"); # and an proxy challenge
if(!avp_load_radius("digest")) { # here i get the SIP-AVP from
the radius
log(1,"Failure with the AVP-Value\n"); # if it fails i'll get
a message
break; # go out
}
avp_print(); # print all avp's (this command is never executed
:( ) append_hf ("Remote-Party-ID: 111222333\r\n"); # append this
silly row - it is never executed
append_rpid_hf("",
";party=calling;id-type=subscriber;screen=yes"); # append the rpid
from SIP-AVP - and this command is also never executed break; #
go out };
route(3); # go to route block 3
break; # end
}
I tried also this snippet without the breaks and proxy-commands but it
doesn't work.
I don't know what is wrong - please help me :s
Thanks !
Dirk
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
3:17 p.m.
Silly me, I didn't look too closely at your auth if structure, just assumed
it was ok.
You need something like this (from the onsip.org auth example):
# -----------------------------------------------------------------
# INVITE Message Handler
# -----------------------------------------------------------------
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
}
Lookup avps;
append avps;
Your if only look up avps for the first INVITE (when ser sends back
unauhtorized to the client). Thus, you need to break after the proxy
challenge. The next INVITE will then not enter the proxy_challenge call and
continue (because proxy_authorize will be true if credentials are present
and correct).
I recommend you to look at the ONsip.org Getting Stared document and the
configs. They are meant to be best practice references that people can build
their configs around.
g-)
----- Original Message -----
From: "Dirk Willbrandt" <dw(a)terralink.de>
To: <serusers(a)lists.iptel.org>
Sent: Wednesday, June 01, 2005 09:59 AM
Subject: Re: [Serusers] WG: rpid again
Hi Greger,
Hi list,
I'm using the CVS Version from yesterday.
I tried the Sip-Rpid=number but i get the same problem.
Yesterday i tried some other things, append some hfs at another place and
so on.
I can append a hf before the invite and befor the radius_proxy_authorize()
but when i copy the append-row after the proxy authorize it seems that it
would never be executed. Why ?
Thanks
Dirk
Greger V. Teigre wrote:
The change done to ser 0.9.0 where Sip-Rpid
RADIUS avpair was changed to
Sip-AVP=rpid:number was rolled back. I believe CVS head has this change
(though backwards compatible). Hence: Use Sip-Rpid=number instead of
SIP-AVP=rpid:number.
g-)
Dirk Willbrandt wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi list !
I have a Problem with the appending of an rpid with the
functions avp_load_radius(), append_rpid_hf().
In my Radius DB i have an SIP-AVP field which is filled with the Value
rpid:[NUMBER]
When i run manuall the Radius Reply-Query i get the correct value for
SIP-AVP.
Now, i reconfigured my ser.cfg so that an avp_load_radius() is
executed after an incoming INVITE.
My Radius is answering on the command and sends the correct SIP-AVP
Value for the User.
Now my Problem:
I can't append the RPID or anything else to the SIP-Header after the
answer from the Radius.
So the call is going out without the rpid in the Header.
Can anyone help me ?
Here is the Configure-Snip:
if (method=="INVITE") { # here comes the invite
if (!radius_proxy_authorize("")) { # for the digest avp_load_radius
it seems that i must use an proxy auth
proxy_challenge("","0"); # and an proxy challenge
if(!avp_load_radius("digest")) { # here i get the SIP-AVP from
the radius
log(1,"Failure with the AVP-Value\n"); # if it fails i'll get
a message
break; # go out
}
avp_print(); # print all avp's (this command is never executed
:( ) append_hf ("Remote-Party-ID: 111222333\r\n"); # append this
silly row - it is never executed
append_rpid_hf("",
";party=calling;id-type=subscriber;screen=yes"); # append the rpid
from SIP-AVP - and this command is also never executed break; #
go out };
route(3); # go to route block 3
break; # end
}
I tried also this snippet without the breaks and proxy-commands but it
doesn't work.
I don't know what is wrong - please help me :s
Thanks !
Dirk
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7120
days inactive
7121
days old
3 comments
2 participants
participants (2)
-
Dirk Willbrandt -
Greger V. Teigre