Thanks Ryan,

Many people can't call me !?

Harry

look at my ser.cfg: # $Id: ser.cfg,v 1.27 2005/03/10 14:16:25 Exp $ # #

# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3))

/* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@serveur1.home.net/ser" user=root group=ser fifo_user=root # owner of the ser fifo fifo_group=ser fifo_mode=0660 # fifo's permissions #disable_core=yes #disables core dumping #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) listen=80.119.9.7 #

# ------------------ module loading ----------------------------------

loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/avpops.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params-- modparam("usrloc", "db_mode", 2)

# -- autdb_params-- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# -- nathelper params -- modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1)

# mediaproxy params -- modparam("mediaproxy", "natping_interval", 30) modparam("mediaproxy", "mediaproxy_socket", "var/run/mediaproxy.sock")

# -- registrar params -- modparam("registrar", "nat_flag", 4)

# -- tm params -- modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout")

# --domain params -- modparam("domain", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("domain", "domain_table", "domain") modparam("domain", "db_mode", 1) # Use caching

# -- permissions params -- modparam("permissions", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "default_deny_file", "/etc/ser/permissions.deny") modparam("permissions", "default_allow_file", "/etc/ser/permissions.allow")

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") { record_route(); };

if (method=="CANCEL" || method=="BYE") { end_media_session(); };

# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { if (has_totag() && method=="INVITE" || method=="ACK") { if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); }; use_media_proxy(); }; route(1); break; };

# Requests to others domains if (!is_uri_host_local()) {

# Checking Authorization if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("407", "Proxy Authentication Required"); break; };

if (client_nat_test("3")) { setflag(4); };

if (isflagset(4)) { force_rport(); fix_contact(); use_media_proxy(); };

# mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local() || src_ip==192.168.0.0/24 && src_port==5050) {

if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; };

}; }

route[1] { ########################### # Default Message Handler # ###########################

t_on_reply("1");

# send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

route[2] { ############################ # Register Message Handler # ############################

if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); };

if (!www_authorize("nxs.yi.org", "subscriber")) { www_challenge("nxs.yi.org", "0"); sl_send_reply("401", "Unauthorized"); break; };

if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; };

consume_credentials();

if (!save("location")) { sl_reply_error(); break; }; }

route[3] { ############################# # CANCEL and INVITE handler # ############################# # checking our sip agents if (client_nat_test("3")) { setflag(4); }; if (isflagset(4)) { force_rport(); fix_contact(); use_media_proxy(); }; # Checking Authorization to use proxy sip if (method=="INVITE" && !allow_trusted()) {

if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("407", "Proxy Authentication Required"); break; }; };

consume_credentials();

# SIP destinations to PSTN if (uri=~"^sip:0[0-9]{4}@.*$" || uri=~"^sip:0[0-9]{10}@.*$" || uri=~"^sip:006[0-9]{8}@.*$") { route(4); route(1); break; };

# SIP destinations to IPBX if (uri=~"^sip:8[0-3]@.*$") { route(5); route(1); break; }

# native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); break;

}

route[4] { ########################## # Outgoing PSTN Handler # ##########################

# check ACLs if (uri=~"^sip:0[0-9]{4}@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; }; } else if (uri=~"^sip:0[0-9]{10}@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; };

} else if (uri=~"^sip:006[0-9]{8}@.*$") { if (!is_user_in("From", "cellphone")) { sl_send_reply("403", "Forbidden"); break; }; }; rewritehostport("192.168.0.50:5050"); }

route[5] { ########################## # Asterisk Handler # ##########################

if (uri=~"^sip:8[0-3]@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; }; };

rewritehostport("192.168.0.50:5050"); # t_relay_to_udp("192.168.0.50","5060"); }

#route[6] { ########################## # Sems Handler # ##########################

# t_relay_to_udp("192.168.0.50","5060"); #}

onreply_route[1] { ########################## # Statefull Handler # ##########################

if (client_nat_test("1")) { setflag(4); };

if (isflagset(4) && status=~"(180) || (183) || 2[0-9][0-9]") { if(search("^Content-Type: .*$")) { use_media_proxy(); }; };

}

--- Ryan Pagquil rpagquil@philonline.com a écrit :

i'm trying to connect to you at sip:bob@80.119.9.7 but i get proxy authenticate. can we test our setup and chat for a while.

harry gaillac wrote:

...

...

Hi Harry, I'am a new user , and would like to

test

...

...

my call over the internet, i have an internet connection at home, where can i find a publicly available SIP server

to

...

...

route the call to you, so that i can test th functionality ?

Look at www.ingate.com

...

please can u suggest a way, or if you are on

Public

...

...

IP, i can use direct call, but as you have a domain name, i would like the call to be routed using a Public running SIP Server ,

try sip:bob@nxs.yi.org or sip:bob@80.119.9.7

i have somme problems to receive calls !!?

Regards Harry

---

...

Appel audio GRATUIT partout dans le monde avec le

nouveau Yahoo! Messenger

...

Téléchargez cette version sur

http://fr.messenger.yahoo.com

...

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- Ryan Pagquil Infodyne Inc. - PhilOnline.com 3603 Antel Global Corporate Center Doña Julia Vargas Ave. Ortigas Center Pasig City Tel: 687-0715 Web: www.philonline.com

___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

and also make sure if you do allow they are just meant for your internal users, i.e relays to pstn arent allowed, that is unless u want people to make "free" pstn calls, :-)

Iqbal

Steve Blair wrote:

If he is getting a proxy authenticate error as his message suggested then your ser.cfg has to be modified to allow calls from outside your domain without those calls being authenticated first.

harry gaillac wrote:

...

Thanks Ryan,

Many people can't call me !?

Harry

look at my ser.cfg: # $Id: ser.cfg,v 1.27 2005/03/10 14:16:25 Exp $ # #

# ----------- global configuration parameters

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3))

/* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@serveur1.home.net/ser" user=root group=ser fifo_user=root # owner of the ser fifo fifo_group=ser fifo_mode=0660 # fifo's permissions #disable_core=yes #disables core dumping #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) listen=80.119.9.7 #

# ------------------ module loading

loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/avpops.so"

# ----------------- setting module-specific parameters

# -- usrloc params-- modparam("usrloc", "db_mode", 2)

# -- autdb_params-- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# -- nathelper params -- modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1)

# mediaproxy params -- modparam("mediaproxy", "natping_interval", 30) modparam("mediaproxy", "mediaproxy_socket", "var/run/mediaproxy.sock")

# -- registrar params -- modparam("registrar", "nat_flag", 4)

# -- tm params -- modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout")

# --domain params -- modparam("domain", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("domain", "domain_table", "domain") modparam("domain", "db_mode", 1) # Use caching

# -- permissions params -- modparam("permissions", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "default_deny_file", "/etc/ser/permissions.deny") modparam("permissions", "default_allow_file", "/etc/ser/permissions.allow")

# ------------------------- request routing logic

# main routing logic

route{

# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply("483","Too Many Hops");
    break;
};
if (msg:len >=  max_len ) {
    sl_send_reply("513", "Message too big");
    break;
};

# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy;

that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") { record_route(); };

if (method=="CANCEL" || method=="BYE") {
    end_media_session();
};

# subsequent messages withing a dialog should take

the # path determined by record-routing if (loose_route()) { if (has_totag() && method=="INVITE" || method=="ACK") { if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); }; use_media_proxy(); }; route(1); break; };

# Requests to others domains
if (!is_uri_host_local()) {

# Checking Authorization
   if (!proxy_authorize("","subscriber")) {
              proxy_challenge("","0");
    sl_send_reply("407", "Proxy Authentication

Required"); break; };

   if (client_nat_test("3")) {
           setflag(4);
   };

   if (isflagset(4)) {
           force_rport();
           fix_contact();
           use_media_proxy();
   };


# mark routing logic in request
append_hf("P-hint: outbound\r\n");     route(1);
break;
};

# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following

command # with proper names and addresses in it) if (is_from_local() || src_ip==192.168.0.0/24 && src_port==5050) {

    if (method=="CANCEL") {
        route(3);
        break;
    } else if (method=="INVITE") {
        route(3);
        break;
    } else if (method=="REGISTER") {
        route(2);
        break;
    };

};

}

route[1] { ########################### # Default Message Handler # ###########################

t_on_reply("1");

# send it out now; use stateful forwarding as it

works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

route[2] { ############################ # Register Message Handler # ############################

if (client_nat_test("3")) {
    setflag(4);
    force_rport();
    fix_contact();
};

if (!www_authorize("nxs.yi.org", "subscriber")) {
       www_challenge("nxs.yi.org", "0");
    sl_send_reply("401", "Unauthorized");
           break;
};

if (!check_to()) {
    sl_send_reply("401", "Unauthorized");
           break;
};   

consume_credentials();

if (!save("location")) {
    sl_reply_error();
    break;
};

}

route[3] { ############################# # CANCEL and INVITE handler # #############################

# checking our sip agents
if (client_nat_test("3")) {
    setflag(4);
};

   if (isflagset(4)) {
           force_rport();
           fix_contact();
           use_media_proxy();
   };

# Checking Authorization to use proxy sip     if 

(method=="INVITE" && !allow_trusted()) {

    if (!proxy_authorize("","subscriber")) {
        proxy_challenge("","0");
        sl_send_reply("407", "Proxy Authentication

Required"); break; };

};

consume_credentials();

# SIP destinations to PSTN
if (uri=~"^sip:0[0-9]{4}@.*$" ||

uri=~"^sip:0[0-9]{10}@.*$" || uri=~"^sip:006[0-9]{8}@.*$") { route(4); route(1); break; };

# SIP destinations to IPBX
if (uri=~"^sip:8[0-3]@.*$") {
    route(5);
    route(1);
    break;
}

   # native SIP destinations are handled using

our USRLOC DB lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); break;

}

route[4] { ########################## # Outgoing PSTN Handler # ##########################

# check ACLs
if (uri=~"^sip:0[0-9]{4}@.*$") {
    if (!is_user_in("From", "local")) {             

sl_send_reply("403", "Forbidden"); break; };

} else if (uri=~"^sip:0[0-9]{10}@.*$") {
           if (!is_user_in("From", "local")) {
                   sl_send_reply("403",

"Forbidden"); break; };

   } else if (uri=~"^sip:006[0-9]{8}@.*$") {
           if (!is_user_in("From", "cellphone"))

{ sl_send_reply("403", "Forbidden"); break; }; }; rewritehostport("192.168.0.50:5050"); }

route[5] { ########################## # Asterisk Handler # ##########################

   if (uri=~"^sip:8[0-3]@.*$") {
           if (!is_user_in("From", "local")) {
                   sl_send_reply("403",

"Forbidden"); break; }; };

rewritehostport("192.168.0.50:5050");
  # t_relay_to_udp("192.168.0.50","5060");

}

#route[6] { ########################## # Sems Handler # ##########################

  # t_relay_to_udp("192.168.0.50","5060");

#}

onreply_route[1] { ########################## # Statefull Handler # ##########################

   if (client_nat_test("1")) {
           setflag(4);
   };

if (isflagset(4) && status=~"(180) || (183) ||

2[0-9][0-9]") { if(search("^Content-Type: .*$")) { use_media_proxy(); }; };

}

--- Ryan Pagquil rpagquil@philonline.com a écrit :

...

i'm trying to connect to you at sip:bob@80.119.9.7 but i get proxy authenticate. can we test our setup and chat for a while.

harry gaillac wrote:

...

...

Hi Harry, I'am a new user , and would like to

test

...

...

my call over the internet, i have an internet connection at home, where can i find a publicly available SIP server

to

...

...

route the call to you, so that i can test th functionality ?

Look at www.ingate.com

...

please can u suggest a way, or if you are on

Public

...

...

IP, i can use direct call, but as you have a domain name, i would like the call to be routed using a Public running SIP Server ,

try sip:bob@nxs.yi.org or sip:bob@80.119.9.7

i have somme problems to receive calls !!?

Regards Harry

---

...

Appel audio GRATUIT partout dans le monde avec le

nouveau Yahoo! Messenger

...

Téléchargez cette version sur

http://fr.messenger.yahoo.com

...

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- Ryan Pagquil Infodyne Inc. - PhilOnline.com 3603 Antel Global Corporate Center Doña Julia Vargas Ave. Ortigas Center Pasig City Tel: 687-0715 Web: www.philonline.com

---

Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

harry,

could you try me sip:rpagquil@sip.philonline.com

thanks,

harry gaillac wrote:

Thanks Ryan,

Many people can't call me !?

Harry

look at my ser.cfg: # $Id: ser.cfg,v 1.27 2005/03/10 14:16:25 Exp $ # #

# ----------- global configuration parameters

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3))

/* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@serveur1.home.net/ser" user=root group=ser fifo_user=root # owner of the ser fifo fifo_group=ser fifo_mode=0660 # fifo's permissions #disable_core=yes #disables core dumping #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) listen=80.119.9.7 #

# ------------------ module loading

loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/avpops.so"

# ----------------- setting module-specific parameters

# -- usrloc params-- modparam("usrloc", "db_mode", 2)

# -- autdb_params-- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# -- nathelper params -- modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1)

# mediaproxy params -- modparam("mediaproxy", "natping_interval", 30) modparam("mediaproxy", "mediaproxy_socket", "var/run/mediaproxy.sock")

# -- registrar params -- modparam("registrar", "nat_flag", 4)

# -- tm params -- modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout")

# --domain params -- modparam("domain", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("domain", "domain_table", "domain") modparam("domain", "db_mode", 1) # Use caching

# -- permissions params -- modparam("permissions", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "default_deny_file", "/etc/ser/permissions.deny") modparam("permissions", "default_allow_file", "/etc/ser/permissions.allow")

# ------------------------- request routing logic

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") { record_route(); };

if (method=="CANCEL" || method=="BYE") { end_media_session(); };

# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { if (has_totag() && method=="INVITE" || method=="ACK") { if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); }; use_media_proxy(); }; route(1); break; };

# Requests to others domains if (!is_uri_host_local()) {

# Checking Authorization if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("407", "Proxy Authentication Required"); break; };

   if (client_nat_test("3")) {
           setflag(4);
   };

   if (isflagset(4)) {
           force_rport();
           fix_contact();
           use_media_proxy();
   };

# mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local() || src_ip==192.168.0.0/24 && src_port==5050) {

if (method=="CANCEL") {
	route(3);
	break;
} else if (method=="INVITE") {
	route(3);
	break;
} else if (method=="REGISTER") {
	route(2);
	break;
};

}; }

route[1] { ########################### # Default Message Handler # ###########################

t_on_reply("1");

# send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

route[2] { ############################ # Register Message Handler # ############################

if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); };

if (!www_authorize("nxs.yi.org", "subscriber")) { www_challenge("nxs.yi.org", "0"); sl_send_reply("401", "Unauthorized"); break; };

if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; };

consume_credentials();

if (!save("location")) { sl_reply_error(); break; }; }

route[3] { ############################# # CANCEL and INVITE handler # #############################

# checking our sip agents if (client_nat_test("3")) { setflag(4); };

   if (isflagset(4)) {
           force_rport();
           fix_contact();
           use_media_proxy();
   };

# Checking Authorization to use proxy sip if (method=="INVITE" && !allow_trusted()) {

if (!proxy_authorize("","subscriber")) {
	proxy_challenge("","0");
	sl_send_reply("407", "Proxy Authentication

Required"); break; }; };

consume_credentials();

# SIP destinations to PSTN if (uri=~"^sip:0[0-9]{4}@.*$" || uri=~"^sip:0[0-9]{10}@.*$" || uri=~"^sip:006[0-9]{8}@.*$") { route(4); route(1); break; };

# SIP destinations to IPBX if (uri=~"^sip:8[0-3]@.*$") { route(5); route(1); break; }

   # native SIP destinations are handled using

our USRLOC DB lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); break;

}

route[4] { ########################## # Outgoing PSTN Handler # ##########################

# check ACLs if (uri=~"^sip:0[0-9]{4}@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; };

} else if (uri=~"^sip:0[0-9]{10}@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; };

   } else if (uri=~"^sip:006[0-9]{8}@.*$") {
           if (!is_user_in("From", "cellphone"))

{ sl_send_reply("403", "Forbidden"); break; }; }; rewritehostport("192.168.0.50:5050"); }

route[5] { ########################## # Asterisk Handler # ##########################

   if (uri=~"^sip:8[0-3]@.*$") {
           if (!is_user_in("From", "local")) {
                   sl_send_reply("403",

"Forbidden"); break; }; };

rewritehostport("192.168.0.50:5050"); # t_relay_to_udp("192.168.0.50","5060"); }

#route[6] { ########################## # Sems Handler # ##########################

  # t_relay_to_udp("192.168.0.50","5060");

#}

onreply_route[1] { ########################## # Statefull Handler # ##########################

   if (client_nat_test("1")) {
           setflag(4);
   };

if (isflagset(4) && status=~"(180) || (183) || 2[0-9][0-9]") { if(search("^Content-Type: .*$")) { use_media_proxy(); }; };

}

--- Ryan Pagquil rpagquil@philonline.com a écrit :

...

i'm trying to connect to you at sip:bob@80.119.9.7 but i get proxy authenticate. can we test our setup and chat for a while.

harry gaillac wrote:

...

...

Hi Harry, I'am a new user , and would like to

test

...

...

my call over the internet, i have an internet connection at home, where can i find a publicly available SIP server

to

...

...

route the call to you, so that i can test th functionality ?

Look at www.ingate.com

...

please can u suggest a way, or if you are on

Public

...

...

IP, i can use direct call, but as you have a domain name, i would like the call to be routed using a Public running SIP Server ,

try sip:bob@nxs.yi.org or sip:bob@80.119.9.7

i have somme problems to receive calls !!?

Regards Harry

---

...

Appel audio GRATUIT partout dans le monde avec le

nouveau Yahoo! Messenger

...

Téléchargez cette version sur

http://fr.messenger.yahoo.com

...

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- Ryan Pagquil Infodyne Inc. - PhilOnline.com 3603 Antel Global Corporate Center Doña Julia Vargas Ave. Ortigas Center Pasig City Tel: 687-0715 Web: www.philonline.com

___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com