New subject: [Serusers] SER + SEMS

24 Feb 2004

Hi I have got some improvement...now i am getting voicemail in my email but 
after sending one email...i again get Wrong FIFO and then if i restart my 
sems and ser...it works for one more time.......same case always

...
 From: "Kapil Dhawan"
&lt;sersavvy(a)hotmail.com  To:
serusers(a)lists.iptel.org
Subject: RE: [Serusers] SER + SEMS
Date: Tue, 24 Feb 2004 09:35:39 +0000

I have tried to debug all this

this is what i get]
(1185) DEBUG: run (AmServer.cpp:165): version= <0.2  (1185) DEBUG: run (AmServer.cpp:170): fct_name=
<sip_request.voicemail  (1185) DEBUG:
execute (AmServer.cpp:229): cmd.method= <INVITE 
(1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111  (1185) DEBUG: execute (AmServer.cpp:231): cmd.email= 
&lt;kdhawan(a)primus-direct.com  (1185) DEBUG:
execute (AmServer.cpp:232): cmd.domain= <203.196.128.126  (1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip=
<203.196.128.126  (1185) DEBUG: execute
(AmServer.cpp:234): cmd.port= <  (1185)
DEBUG: execute (AmServer.cpp:235): cmd.r_uri= 
<sip:1111@203.196.128.126;user=phone 
(1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri= 
<sip:3333@203.196.128.122:5060;user=phone;transport=udp  (1185) DEBUG: execute (AmServer.cpp:237): cmd.from= 
<<sip:3333@203.196.128.126;user=phone>  
(1185) DEBUG: execute (AmServer.cpp:238): cmd.to= 
<<sip:1111@203.196.128.126;user=phone> 
(1185) DEBUG: execute (AmServer.cpp:239): cmd.callid= 
&lt;04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122  (1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag=
<32351  (1185) DEBUG: execute
(AmServer.cpp:241): cmd.to_tag= <  (1185)
DEBUG: execute (AmServer.cpp:244): cseq_str= <8 
(1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8)
(1185) DEBUG: execute (AmServer.cpp:251): cmd.key= <31558:1504541206  (1185) DEBUG: execute (AmServer.cpp:252):
cmd.route= <  (1185) DEBUG: execute
(AmServer.cpp:253): cmd.next_hop= < 
(1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0
Session-Expires: 1800
Min-SE: 1800
'
(1185) DEBUG: execute (AmServer.cpp:266): body: `v=0
o=SS-TA101 23265 23265 IN IP4 203.196.128.122
s=-
c=IN IP4 203.196.128.122
t=0 0
m=audio 54321 RTP/AVP 0 8 18 4 96
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=rtpmap:4 G723-63/8000
a=rtpmap:96 telephone-event/8000
a=fmtp:96 0-11
'
(1185) DEBUG: execute (AmServer.cpp:277): everything is OK !
(1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for user 
'1111': kdhawan(a)primus-direct.com
(1185) DEBUG: startSession (AmSession.cpp:435): Starting session... 
(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000004A12F57B1AE)
(1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute 
definition 'fmtp:96 0-11'
(1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0
(1191) DEBUG: sendToFIFO (AmRequest.cpp:199): 
msg=<:vm_reply:000004A7166E92A0
180
ringing
31558:1504541206
000004A12F57B1AE
Contact: <sip:1111@203.196.128.126  .
.

  (1191) DEBUG: write_to_fifo
(AmRequest.cpp:708): Write to fifo: completed
(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 
fifo_t_reply succeeded
(1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <  (1191) DEBUG: getReturnCode (AmRequest.cpp:445):
n_cmd.next_hop= <  (1191) DEBUG:
getReturnCode (AmRequest.cpp:448): n_cmd.route= <  (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns 
ret=getReturnCode=0
(1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random local port
(1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set to 
35226
(1191) DEBUG: sendToFIFO (AmRequest.cpp:199): 
msg=<:vm_reply:000004A756924871
200
OK
31558:1504541206
000004A12F57B1AE
Contact: <sip:1111@203.196.128.126 
Content-Type: application/sdp
.
v=0
o=username 0 0 IN IP4 203.196.128.126
s=session
c=IN IP4 203.196.128.126
t=0 0
m=audio 35226 RTP/AVP 0
a=rtpmap:0 PCMU/8000
.

  (1191) DEBUG: write_to_fifo
(AmRequest.cpp:708): Write to fifo: completed
(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 
fifo_t_reply succeeded
(1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <  (1191) DEBUG: getReturnCode (AmRequest.cpp:445):
n_cmd.next_hop= <  (1191) DEBUG:
getReturnCode (AmRequest.cpp:448): n_cmd.route= <  (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns 
ret=getReturnCode=0
(1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set to 
203.196.128.122:54321
(1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to 
203.196.128.122/54321
(1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting sending 
announce...(/usr/local/lib/sems/audio/default.wav)
(1191) DEBUG: trying to read WAV file
(1191) DEBUG: tag = <RIFF  (1191) DEBUG:
file size = <129710  (1191) DEBUG: tag =
<WAVE  
(1191) DEBUG: tag = <fmt   
(1191) DEBUG: chunk_size = <18  
(1191) DEBUG: fmt = <01  
(1191) DEBUG: channels = <1  
(1191) DEBUG: rate = <8000  
(1191) DEBUG: bits/sample = <16  
(1191) DEBUG: tag = <fact  
(1191) DEBUG: chunk size = <4  
(1191) DEBUG: tag = <data  
(1191) DEBUG: chunk size = <129660  

ERROR ERROR ERROR

(1185) DEBUG: run (AmServer.cpp:165): version= <
 (1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version.

(1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding 260 
bytes (packet size=320)
(1191) DEBUG: convert (AmAudio.cpp:208): end of stream
(1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce reaches 
its end.
(1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording 
message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122.wav)
(1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished 
recording message
(1191) DEBUG: sendToFIFO (AmRequest.cpp:199): 
msg=<:t_uac_dlg:000004A7326ED90A
BYE
sip:3333@203.196.128.122:5060;user=phone;transport=udp
.
From: <sip:1111@203.196.128.126;user=phone>;tag=000004A12F57B1AE
To: <sip:3333@203.196.128.126;user=phone> ;tag=32351
CSeq: 9 BYE
Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.122
Contact: <sip:1111@203.196.128.126  .
.

  (1191) DEBUG: write_to_fifo
(AmRequest.cpp:708): Write to fifo: completed
(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 481 
Call Leg/Transaction Does Not Exist
(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns 
ret=getReturnCode=0
(1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call 
Leg/Transaction Does Not Exist
(1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data size: 0
(1191) DEBUG: sadSession (AmSession.cpp:309): searching for session to 
destroy 
(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6(a)203.196.128.12232351,sess_key=000004A12F57B1AE)
(1191) DEBUG: findSession (AmSession.cpp:373): session found with key
(1191) DEBUG: destroySession (AmSession.cpp:331): sess_it != 
a_sessions.end()
(1191) DEBUG: destroySession (AmSession.cpp:334): it != 
sess_it->second.end()
(1191) DEBUG: destroySession (AmSession.cpp:341): session found: stopping 
session
(1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner trying to 
stop 80c8e18
(1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to post 
event
(1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event posted
(1191) DEBUG: destroySession (AmSession.cpp:343): session stopped and 
destroyed (#sessions=0)
(1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its work
(1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been destroyed'
(1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished

>From: "Kapil Dhawan" &lt;sersavvy(a)hotmail.com  >To: serusers(a)lists.iptel.org
>Subject: [Serusers] SER + SEMS
>Date: Tue, 24 Feb 2004 07:29:16 +0000
  >Hi All...
  >i am running SER perfectly....Now i am
facing problem with running 
>SEMS....
  >i have tried SER 0.8.12(current sems
cvs update ) and 0.8.11(sems 0.11) i 
>am unable to do anything....

>whats happening is....
  >my SER is already installed.....and
working...now i am compiling it with 
>vm module and making Multi Domain off (in 0.8.11) and its off in 0.8.12 as 
>it depends upon domain module there....so no problem with multidomain 
>support...so it works fine...following is the code of ser.cfg
  >               
if(method=="ACK" || method=="INVITE" || method=="BYE"){
>                  if (!t_newtran()) {
>                    log("could not create new transaction\n");
>                    sl_send_reply("500","could not create new 
>transaction");
>                    break;
>                  };
  >               
if(!vm("/tmp/am_fifo", "voicemail")){
  >               
lookup("aliases");
>                if (!uri==myself) {
>                        append_hf("P-hint: outbound alias\r\n");
>                        route(1);
>                        break;
>                };
  >                # native SIP
destinations are handled using our USRLOC DB
>                if (!lookup("location")) {
>                        sl_send_reply("404", "Not Found");
>                        break;
>                };
>                };
>                };

>Next....is i am compiling current version of sems...from cvs with 
>following command

>CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems
>export CVSROOT
>cvs co answer_machine
  >now it also gets compiled with one or
two erros of audio file paths 
>etc...which i corrected in /etc/sems/sems.conf and enaled voicemail module 
>in it..
  >Now when i run it sems -D 3 -E
  >it shows me sems started
successsfully.....but when i try and give a call 
>so that it shud be transfered to voicemail...in sems log i see ## Wrong 
>FIFO Interface version ##
  >due to which ...my wav file which is
getting stored in /tmp folder is 
>having 44 bytes size always...i know there is version conflict...but i am 
>unable to get proper matching versions of both.............
  >kidly help me out...if u need i can
attach any more info too...
  >kapil

>_________________________________________________________________
>Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag 
>Only on www.shaadi.com. Register now!

>_______________________________________________
>Serusers mailing list
&gt;serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers

_________________________________________________________________
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag 
Only on www.shaadi.com. Register now!

_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers 
_________________________________________________________________
INDIA TODAY @ Rs. 5 + a free gift ! 
http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html 
Subcribe Now ...