what is the UA you guys are using? is it a soft phone or ATAs..? there could be prob with the UA you are using, use ngrep of ethreal to diagnose the sip headers/messages regards, Madan ----- Original Message ----- From: "abhati" <abhati(a)primus-direct.com> To: <serusers(a)lists.iptel.org> Sent: Monday, February 09, 2004 7:19 PM Subject: [Serusers] Cancel call Problem phone cancel > requests. > > i am attaching my ser.cfg file. > > # > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > debug=7 > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > #port=5060 > #children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > loadmodule "/usr/local/lib/ser/modules/domain.so" > loadmodule "/usr/local/lib/ser/modules/call.so" > > modparam("domain", "db_url", "sql://root:root@localhost/ser") > modparam("domain", "db_mode", 1) # Use chaching > modparam("domain", "domain_table", "domain") > modparam("domain", "domain_col", "domain") > > modparam("tm", "fr_inv_timer", 30 ) > modparam("registrar", "default_expires", 60) > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this config), > # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (is_from_local()) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("", "subscriber")) { > www_challenge("", "0"); > break; > }; > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > > > if (method=="INVITE") { > if(call()){ //written one module for few things works fine > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > }; > > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > } > > > > . > > > > > > > > Disclaimer > -------------------------------------------------------------------------- > This email and any files transmitted with it are confidential > and intended solely for the use of the individual or entity > to whom they are addressed. If you have received this email > in error please notify the system manager. Recipients must > check this email and any attachments for the presence of > viruses before downloading them. Direct Internet / > Primus India accepts no liability for any damage caused by > any virus transmitted by this email. > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >