I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

List overview All Threads
Download

newer

older

2 pull requests: issue #1168 and...

rtpp_test() in kamailio log

Wilkins, Steve

21 May 2018 21 May '18

5:01 p.m.

Hello All,

When Kamailio sends a '200 OK' to Asterisk, it is putting its Public IP into the Record-Routes. In Asterisk 14.6, it would send the 'ACK' back to the Private IP Address of Kamailio, but Asterisk 15.x is using the Public IP Address that Kamailio placed in the Record-Routes so... Is there a way to force Kamailio to set the Record-Route to its Private IP address of the first Record-Route in messages forwarded to Asterisk?

Thank you?

Attachments:

attachment.html (text/html — 2.3 KB)

Show replies by date

Federico Cabiddu

21 May 21 May

5:08 p.m.

Hi, if you have Kamailio listening on private IP and public IP you need two record-routes. Have a look at this param of the rr module: http://www.kamailio.org/docs/modules/devel/modules/rr.html#rr.p.enable_doubl...

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve swwilkins@mitre.org wrote:

...

Hello All,

When Kamailio sends a ‘200 OK’ to Asterisk, it is putting its Public IP into the Record-Routes. In Asterisk 14.6, it would send the ‘ACK’ back to the Private IP Address of Kamailio, but Asterisk 15.x is using the Public IP Address that Kamailio placed in the Record-Routes so…

*Is there a way to force Kamailio to set the Record-Route to its Private IP address of the first Record-Route in messages forwarded to Asterisk*?

Thank you?

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Wilkins, Steve

5:32 p.m.

Hello,

I set that double route to ‘2’ and Kamailio still not hearing traffic coming in from Public. I think I need to figure out how to get Kamailio to set the first RR in the ‘200 OK’ to its Private IP, because the Server Kamailio is on may not be open to public traffic.

Thank you

From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Monday, May 21, 2018 1:08 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote:

Hello All,

When Kamailio sends a ‘200 OK’ to Asterisk, it is putting its Public IP into the Record-Routes. In Asterisk 14.6, it would send the ‘ACK’ back to the Private IP Address of Kamailio, but Asterisk 15.x is using the Public IP Address that Kamailio placed in the Record-Routes so… Is there a way to force Kamailio to set the Record-Route to its Private IP address of the first Record-Route in messages forwarded to Asterisk?

Thank you?

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Federico Cabiddu

9:06 p.m.

Not sure I understand your scenario. How many interfaces your kamailio has? How's the callflow going? Public->Kamailio->Asterisk? Did you have a look on "advertise" parameter of core "listen" directive? https://www.kamailio.org/wiki/cookbooks/5.1.x/core#listen

Best regards,

Federico

On Mon, May 21, 2018 at 7:32 PM, Wilkins, Steve swwilkins@mitre.org wrote:

...

Hello,

I set that double route to ‘2’ and Kamailio still not hearing traffic coming in from Public. I think I need to figure out how to get Kamailio to set the first RR in the ‘200 OK’ to its Private IP, because the Server Kamailio is on may not be open to public traffic.

Thank you

*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Monday, May 21, 2018 1:08 PM *To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Hi,

if you have Kamailio listening on private IP and public IP you need two record-routes.

Have a look at this param of the rr module:

http://www.kamailio.org/docs/modules/devel/modules/rr.html# rr.p.enable_double_rr

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve swwilkins@mitre.org wrote:

Hello All,

When Kamailio sends a ‘200 OK’ to Asterisk, it is putting its Public IP into the Record-Routes. In Asterisk 14.6, it would send the ‘ACK’ back to the Private IP Address of Kamailio, but Asterisk 15.x is using the Public IP Address that Kamailio placed in the Record-Routes so…

*Is there a way to force Kamailio to set the Record-Route to its Private IP address of the first Record-Route in messages forwarded to Asterisk*?

Thank you?

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Wilkins, Steve

10:12 p.m.

What is actually happening is –

I M USING Kamailio 5.2 with Asterisk 14.6 and 15.3. Asterisk cannot reach Kamailio on Public IP (Per design)

Asterisk 14.6: If Asterisk sends an ‘INVITE’ to Kamailio (on Private IP), then Kamailio sends back a ‘200 OK’ with its Public IP in both Record-Routes. Asterisk 14.6 is changing the first Record-Route to the Private-IP of Kamailio and also changes the Via to The same Private IP, and hence the ACK is sent to and received by Kamailio…Call works perfect. (Asterisk developers say they are not doing this!).

Asterisk >= 15.0: The above mentioned Record-Route and Via do not get changed and hence the ACK is sent to Kamailio’ s Public IP, but never makes it there (because the my firewall will not allow it).

This is why I was wondering if I could change the Record-Route on the ‘200 OK’ that is sent to Asterisk. I just can’t figure out how to do it.

Thank you for your time!

From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Monday, May 21, 2018 5:06 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Best regards,

Federico

On Mon, May 21, 2018 at 7:32 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote: Hello,

Thank you

From: sr-users [mailto:sr-users-bounces@lists.kamailio.orgmailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Monday, May 21, 2018 1:08 PM To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Subject: Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote:

Hello All,

Thank you?

Federico Cabiddu

22 May 22 May

6:35 a.m.

Good morning, so, if I understand correctly Kamailio is listening on a single interface which is natted. You need two R-R, one with the public and one with the private IP. You also need to put Kamailio on listen on two different ports and use the listen directive along with its advertise parameter.

Regards,

Federico

On Tue, May 22, 2018 at 12:12 AM, Wilkins, Steve swwilkins@mitre.org wrote:

...

What is actually happening is –

I M USING Kamailio 5.2 with Asterisk 14.6 and 15.3. Asterisk cannot reach Kamailio on Public IP (Per design)

Asterisk 14.6: If Asterisk sends an ‘INVITE’ to Kamailio (on Private IP), then Kamailio sends back a ‘200 OK’ with its Public IP in both Record-Routes.

Asterisk 14.6 is changing the first Record-Route to the Private-IP of Kamailio and also changes the Via to The same Private IP, and hence the ACK is

sent to and received by Kamailio…Call works perfect. (Asterisk developers say they are not doing this!).

Asterisk >= 15.0: The above mentioned Record-Route and Via do not get changed and hence the ACK is sent to Kamailio’ s Public IP, but never makes it there (because the my firewall will not allow it).

This is why I was wondering if I could change the Record-Route on the ‘200 OK’ that is sent to Asterisk. I just can’t figure out how to do it.

Thank you for your time!

*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Monday, May 21, 2018 5:06 PM

*To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Not sure I understand your scenario.

How many interfaces your kamailio has?

How's the callflow going?

Public->Kamailio->Asterisk?

Did you have a look on "advertise" parameter of core "listen" directive?

https://www.kamailio.org/wiki/cookbooks/5.1.x/core#listen

Best regards,

Federico

On Mon, May 21, 2018 at 7:32 PM, Wilkins, Steve swwilkins@mitre.org wrote:

Hello,

I set that double route to ‘2’ and Kamailio still not hearing traffic coming in from Public. I think I need to figure out how to get Kamailio to set the first RR in the ‘200 OK’ to its Private IP, because the Server Kamailio is on may not be open to public traffic.

Thank you

*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Monday, May 21, 2018 1:08 PM *To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Hi,

if you have Kamailio listening on private IP and public IP you need two record-routes.

Have a look at this param of the rr module:

http://www.kamailio.org/docs/modules/devel/modules/rr.html# rr.p.enable_double_rr

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve swwilkins@mitre.org wrote:

Hello All,

When Kamailio sends a ‘200 OK’ to Asterisk, it is putting its Public IP into the Record-Routes. In Asterisk 14.6, it would send the ‘ACK’ back to the Private IP Address of Kamailio, but Asterisk 15.x is using the Public IP Address that Kamailio placed in the Record-Routes so…

*Is there a way to force Kamailio to set the Record-Route to its Private IP address of the first Record-Route in messages forwarded to Asterisk*?

Thank you?

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Wilkins, Steve

12:02 p.m.

Good morning and thank you for your response.

I thought that advertise took care of listening on Public and Private IP Address.

I did try - listen=udp:Private-IP-Address:5060 advertise 34.226.187.61:5060 listen=udp:Public-IP-Address:5060 but I got errors without changing the port, My Asterisk only communicate on 5060, so changing the port would not help me.

I do have modparam("rr", "enable_double_rr", 2); I was not sure if mhomed needed to be set in this scenario.

I have done a lot of searching and have not many examples of the situation I am facing.

I think I am just missing something.

Thanks again!

From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Tuesday, May 22, 2018 2:35 AM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Regards,

Federico

On Tue, May 22, 2018 at 12:12 AM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote: What is actually happening is –

I M USING Kamailio 5.2 with Asterisk 14.6 and 15.3. Asterisk cannot reach Kamailio on Public IP (Per design)

This is why I was wondering if I could change the Record-Route on the ‘200 OK’ that is sent to Asterisk. I just can’t figure out how to do it.

Thank you for your time!

From: sr-users [mailto:sr-users-bounces@lists.kamailio.orgmailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Monday, May 21, 2018 5:06 PM

To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org> Subject: Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Best regards,

Federico

On Mon, May 21, 2018 at 7:32 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote: Hello,

Thank you

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote:

Hello All,

Thank you?

Federico Cabiddu

12:08 p.m.

You have to listen on two different ports and advertise them according to you routing if you have only one interface (IP) where your Kamailio is listening to.

Cheers,

Federico

On Tue, May 22, 2018 at 2:02 PM, Wilkins, Steve swwilkins@mitre.org wrote:

...

Good morning and thank you for your response.

I thought that advertise took care of listening on Public and Private IP Address.

I did try -

listen=udp:Private-IP-Address:5060 advertise 34.226.187.61:5060

listen=udp:Public-IP-Address:5060

but I got errors without changing the port, My Asterisk only communicate on 5060, so changing the port would not help me.

I do have modparam("rr", "enable_double_rr", 2); I was not sure if mhomed needed to be set in this scenario.

I have done a lot of searching and have not many examples of the situation I am facing.

I think I am just missing something.

Thanks again!

.

*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Tuesday, May 22, 2018 2:35 AM

*To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Good morning,

so, if I understand correctly Kamailio is listening on a single interface which is natted.

You need two R-R, one with the public and one with the private IP. You also need to put Kamailio on listen on two different ports and use the listen directive along with its advertise parameter.

Regards,

Federico

On Tue, May 22, 2018 at 12:12 AM, Wilkins, Steve swwilkins@mitre.org wrote:

What is actually happening is –

I M USING Kamailio 5.2 with Asterisk 14.6 and 15.3. Asterisk cannot reach Kamailio on Public IP (Per design)

Asterisk 14.6: If Asterisk sends an ‘INVITE’ to Kamailio (on Private IP), then Kamailio sends back a ‘200 OK’ with its Public IP in both Record-Routes.

Asterisk 14.6 is changing the first Record-Route to the Private-IP of Kamailio and also changes the Via to The same Private IP, and hence the ACK is

sent to and received by Kamailio…Call works perfect. (Asterisk developers say they are not doing this!).

Asterisk >= 15.0: The above mentioned Record-Route and Via do not get changed and hence the ACK is sent to Kamailio’ s Public IP, but never makes it there (because the my firewall will not allow it).

This is why I was wondering if I could change the Record-Route on the ‘200 OK’ that is sent to Asterisk. I just can’t figure out how to do it.

Thank you for your time!

*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Monday, May 21, 2018 5:06 PM

*To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Not sure I understand your scenario.

How many interfaces your kamailio has?

How's the callflow going?

Public->Kamailio->Asterisk?

Did you have a look on "advertise" parameter of core "listen" directive?

https://www.kamailio.org/wiki/cookbooks/5.1.x/core#listen

Best regards,

Federico

On Mon, May 21, 2018 at 7:32 PM, Wilkins, Steve swwilkins@mitre.org wrote:

Hello,

I set that double route to ‘2’ and Kamailio still not hearing traffic coming in from Public. I think I need to figure out how to get Kamailio to set the first RR in the ‘200 OK’ to its Private IP, because the Server Kamailio is on may not be open to public traffic.

Thank you

*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Federico Cabiddu *Sent:* Monday, May 21, 2018 1:08 PM *To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

Hi,

if you have Kamailio listening on private IP and public IP you need two record-routes.

Have a look at this param of the rr module:

http://www.kamailio.org/docs/modules/devel/modules/rr.html# rr.p.enable_double_rr

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve swwilkins@mitre.org wrote:

Hello All,

When Kamailio sends a ‘200 OK’ to Asterisk, it is putting its Public IP into the Record-Routes. In Asterisk 14.6, it would send the ‘ACK’ back to the Private IP Address of Kamailio, but Asterisk 15.x is using the Public IP Address that Kamailio placed in the Record-Routes so…

*Is there a way to force Kamailio to set the Record-Route to its Private IP address of the first Record-Route in messages forwarded to Asterisk*?

Thank you?

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Wilkins, Steve

12:54 p.m.

Got it! Thank you Federico!

From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Tuesday, May 22, 2018 8:09 AM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] I think I found issue to Kamailio not forwarding ACK sent to it by Asterisk

You have to listen on two different ports and advertise them according to you routing if you have only one interface (IP) where your Kamailio is listening to.

Cheers,

Federico

On Tue, May 22, 2018 at 2:02 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote: Good morning and thank you for your response.

I thought that advertise took care of listening on Public and Private IP Address.

I did try - listen=udp:Private-IP-Address:5060 advertise 34.226.187.61:5060http://34.226.187.61:5060 listen=udp:Public-IP-Address:5060 but I got errors without changing the port, My Asterisk only communicate on 5060, so changing the port would not help me.

I do have modparam("rr", "enable_double_rr", 2); I was not sure if mhomed needed to be set in this scenario.

I have done a lot of searching and have not many examples of the situation I am facing.

I think I am just missing something.

Thanks again!

From: sr-users [mailto:sr-users-bounces@lists.kamailio.orgmailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Tuesday, May 22, 2018 2:35 AM

Regards,

Federico

On Tue, May 22, 2018 at 12:12 AM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote: What is actually happening is –

I M USING Kamailio 5.2 with Asterisk 14.6 and 15.3. Asterisk cannot reach Kamailio on Public IP (Per design)

This is why I was wondering if I could change the Record-Route on the ‘200 OK’ that is sent to Asterisk. I just can’t figure out how to do it.

Thank you for your time!

From: sr-users [mailto:sr-users-bounces@lists.kamailio.orgmailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: Monday, May 21, 2018 5:06 PM

Best regards,

Federico

On Mon, May 21, 2018 at 7:32 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote: Hello,

Thank you

Best regards,

Federico

On Mon, May 21, 2018 at 7:01 PM, Wilkins, Steve <swwilkins@mitre.orgmailto:swwilkins@mitre.org> wrote:

Hello All,

Thank you?

2465

Age (days ago)

2466

Last active (days ago)

sr-users@lists.kamailio.org

8 comments

2 participants

tags (0)

participants (2)

Federico Cabiddu
Wilkins, Steve