hello
i am using following http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper
when i use serctl ul show it is showing me that that my user Agent is registered but My SJphone is still showing not registered.
SER is on public IP and SJPhone is on private IP what could be the reason same configuration was working in my previous installation of ser on other mechine.
ANY COMMENTS
#my ser.cfg
# # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
alias=mydomain.dyndns.org
# ------------------ module loading ----------------------------------
loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") { save("location"); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };
#inserted by klaus if (method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); };
# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
#inserted by klaus # all incoming replies for t_onrepli-ed transactions enter here onreply_route[1] { if (status=~"[12][0-9][0-9]") force_rtp_proxy(); }
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
ur UA is....?
have u run a ngrep or ethereal to see if your sjphone is actually sending a REGISTER request to ser, and what SER is sending back, you got any iptables/FW running on your machine, blocking 5060.
Iqbal
Kamran Ahmad wrote:
hello
i am using following http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper
when i use serctl ul show it is showing me that that my user Agent is registered but My SJphone is still showing not registered.
SER is on public IP and SJPhone is on private IP what could be the reason same configuration was working in my previous installation of ser on other mechine.
ANY COMMENTS
#my ser.cfg
# # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script #
# ----------- global configuration parameters
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
alias=mydomain.dyndns.org
# ------------------ module loading
loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") { save("location"); break; }; # native SIP destinations are handled using ourUSRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };
#inserted by klaus if (method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); };# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
#inserted by klaus # all incoming replies for t_onrepli-ed transactions enter here onreply_route[1] { if (status=~"[12][0-9][0-9]") force_rtp_proxy(); }
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
.
I tried to run ethereal but there was only SIP Request: no response. why serctl moni and serctl ul show is showing that that my SJPhone is registered. what is required things to do
--- Iqbal iqbal@gigo.co.uk wrote:
ur UA is....?
have u run a ngrep or ethereal to see if your sjphone is actually sending a REGISTER request to ser, and what SER is sending back, you got any iptables/FW running on your machine, blocking 5060.
Iqbal
Kamran Ahmad wrote:
hello
i am using following
http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper
when i use serctl ul show it is showing me that
that
my user Agent is registered but My SJphone is still showing not registered.
SER is on public IP and SJPhone is on private IP
what
could be the reason same configuration was working
in
my previous installation of ser on other mechine.
ANY COMMENTS
#my ser.cfg
# # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri
Exp $
# # simple quick-start config script #
# ----------- global configuration parameters
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
alias=mydomain.dyndns.org
# ------------------ module loading
loadmodule
"/usr/local/lib/ser/modules/nathelper.so"
loadmodule
"/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule
"/usr/local/lib/ser/modules/registrar.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing
logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
# we record-route all messages -- to make sure
that
# subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") { save("location"); break; }; # native SIP destinations are handled using ourUSRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };
#inserted by klaus if (method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); };# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to
UDP
if (!t_relay()) { sl_reply_error(); };
}
#inserted by klaus # all incoming replies for t_onrepli-ed
transactions
enter here onreply_route[1] { if (status=~"[12][0-9][0-9]") force_rtp_proxy(); }
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam
protection around
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
.
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
if its registered whats the problem, install ngrep to get some output debug, if no response i.e from the client is there a block on messages going to client
Iqbal
Kamran Ahmad wrote:
I tried to run ethereal but there was only SIP Request: no response. why serctl moni and serctl ul show is showing that that my SJPhone is registered. what is required things to do
--- Iqbal iqbal@gigo.co.uk wrote:
ur UA is....?
have u run a ngrep or ethereal to see if your sjphone is actually sending a REGISTER request to ser, and what SER is sending back, you got any iptables/FW running on your machine, blocking 5060.
Iqbal
Kamran Ahmad wrote:
hello
i am using following
http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper
when i use serctl ul show it is showing me that
that
my user Agent is registered but My SJphone is still showing not registered.
SER is on public IP and SJPhone is on private IP
what
could be the reason same configuration was working
in
my previous installation of ser on other mechine.
ANY COMMENTS
#my ser.cfg
# # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri
Exp $
# # simple quick-start config script #
# ----------- global configuration parameters
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
alias=mydomain.dyndns.org
# ------------------ module loading
loadmodule
"/usr/local/lib/ser/modules/nathelper.so"
loadmodule
"/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule
"/usr/local/lib/ser/modules/registrar.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing
logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
# we record-route all messages -- to make sure
that
# subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") { save("location"); break; }; # native SIP destinations are handled using ourUSRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };
#inserted by klaus if (method=="INVITE") { record_route(); force_rtp_proxy(); /* set up reply processing */ t_on_reply("1"); };# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to
UDP
if (!t_relay()) { sl_reply_error(); };
}
#inserted by klaus # all incoming replies for t_onrepli-ed
transactions
enter here onreply_route[1] { if (status=~"[12][0-9][0-9]") force_rtp_proxy(); }
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam
protection around
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
.
Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
.
i can send messages to SER but i cannot receive any message from SER. i tried to reg from three mechines (2 windows and one linux) but no success. i tried asterisk but same problem. asterisk is registering ua but UA cannot receive register ACK.
--- Iqbal iqbal@gigo.co.uk wrote:
if its registered whats the problem, install ngrep to get some output debug, if no response i.e from the client is there a block on messages going to client
Iqbal
Kamran Ahmad wrote:
I tried to run ethereal but there was only SIP Request: no response. why serctl moni and serctl ul show is showing that that my SJPhone is registered. what is required things to do
--- Iqbal iqbal@gigo.co.uk wrote:
ur UA is....?
have u run a ngrep or ethereal to see if your sjphone is actually sending a REGISTER request to ser, and what SER is sending back, you got any iptables/FW running on your machine, blocking 5060.
Iqbal
Kamran Ahmad wrote:
hello
i am using following
http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper
when i use serctl ul show it is showing me that
that
my user Agent is registered but My SJphone is
still
showing not registered.
SER is on public IP and SJPhone is on private IP
what
could be the reason same configuration was
working
in
my previous installation of ser on other mechine.
ANY COMMENTS
#my ser.cfg
# # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri
Exp $
# # simple quick-start config script #
# ----------- global configuration parameters
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
alias=mydomain.dyndns.org
# ------------------ module loading
loadmodule
"/usr/local/lib/ser/modules/nathelper.so"
loadmodule
"/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule
"/usr/local/lib/ser/modules/maxfwd.so"
loadmodule
"/usr/local/lib/ser/modules/usrloc.so"
loadmodule
"/usr/local/lib/ser/modules/registrar.so"
# ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing
logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
# we record-route all messages -- to make sure
that
# subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") { save("location"); break; }; # native SIP destinations are handled using ourUSRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found");
=== message truncated ===
____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs
-
Iqbal -
Kamran Ahmad