Hello Marius,

Yes, I armed the failure_route with 't_on_failure("1")' when I setup the CFNA...but the outgoing call generated by the CFNA doesn't go to the failure_route. If I deactivate the flag which triggered the voicemail, I have a loop and the phone rings again after the timer.

Igor.

2010/12/21 marius zbihlei marius.zbihlei@1and1.ro

On 12/21/2010 03:22 PM, Igor Potjevlesch wrote:

Hello all,

I have setup a mechanism to forward outgoing calls to another gateway if the first one replies with 5xx. I have simply used ‘t_check_status’ in the failure_route. This works.

But, with a CFNA it doesn’t work : the incoming call is treated by SER (0.9.9). After the timer has expired the call goes to ‘failure_route’ for the first time to setup the CFNA with, finally, an ‘append_branch’. At this moment, the first gateway replies with 5xx and the call never goes to ‘failure_route’. I can match the 5xx within the ‘onreply_route’, but that’s all. So, instead of trying another gateway, the initial incoming calls terminate on the voicemail.

Can anyone help me?

Hello,

Have you loaded the/another failure route for the second time in the CFNA failure route handler?

Marius

Regards,

Igor.

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users