So, you're saying that if all the dialogs were tracked, everything would work as I expect it to?
-- Alex
-- Sent from my Samsung mobile, and thus lacking in the refinement one might expect from a proper keyboard.
Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Web: http://www.evaristesys.com/Daniel-Constantin Mierla miconda@gmail.com wrote:I think there was an addition to use dialog module to store initial and new values. I don't know if it can be turned off or is automatically when the dialog module is loaded - just to see if that is the cause.
However, if you do msg_apply_changes(), local replies will use the new headers. I'm pretty sure it happened the same before -- e.g., it was no way to revert back so that sl can use older values of the headers. Perhaps you can revert from config, changing the header to initial value that you store in an avp, apply changes and send the reply.
Received and relayed replies should be converted.
Cheers, Daniel
On 10/2/12 8:57 PM, Alex Balashov wrote: I should be clearer: when I say "internally generated", I don't mean it in the sense of 408 or something else opaquely generated by the proxy. I mean internally generated as in originating from the proxy, e.g. something sent with sl_send_reply() or t_reply().
-- Alex
-- Sent from my Samsung mobile, and thus lacking in the refinement one might expect from a proper keyboard.
Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Web: http://www.evaristesys.com/
Alex Balashov abalashov@evaristesys.com wrote: Hello,
I am using the latest cloned 3.3 branch and performing a uac_replace_from() operation. After the operation, I do msg_apply_changes().
My 'uac' modparams are:
modparam("uac", "rr_from_store_param", "vsfc") modparam("uac", "restore_mode", "auto") modparam("uac", "restore_passwd", "xxxxxxxxx")
However, the modified From URI is getting back to the originator, both in internally generated errors, and in relayed replies.
This didn't used to happen before 3.3, but has been outstanding for quite some time (I didn't look at it much until now). Is there some possibility that there is a >= 3.3 bug? Or, have I simply misconfigured something?
Thanks!
-- Alex
Not sure what is 'work as you expect', provided the details I gave in the previous mail related to local replies.
Otherwise, if you don't track all dialogs, could be an issue if some of the replies are ok and some are not.
I will check the uac module and add a parameter to not use dialog module even if loaded, if such option is not already there.
Cheers, Daniel
On 10/2/12 9:11 PM, Alex Balashov wrote:
So, you're saying that if all the dialogs were tracked, everything would work as I expect it to?
-- Alex
-- Sent from my Samsung mobile, and thus lacking in the refinement one might expect from a proper keyboard.
Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Web: http://www.evaristesys.com/
Daniel-Constantin Mierla miconda@gmail.com wrote: I think there was an addition to use dialog module to store initial and new values. I don't know if it can be turned off or is automatically when the dialog module is loaded - just to see if that is the cause.
However, if you do msg_apply_changes(), local replies will use the new headers. I'm pretty sure it happened the same before -- e.g., it was no way to revert back so that sl can use older values of the headers. Perhaps you can revert from config, changing the header to initial value that you store in an avp, apply changes and send the reply.
Received and relayed replies should be converted.
Cheers, Daniel
On 10/2/12 8:57 PM, Alex Balashov wrote:
I should be clearer: when I say "internally generated", I don't mean it in the sense of 408 or something else opaquely generated by the proxy. I mean internally generated as in originating from the proxy, e.g. something sent with sl_send_reply() or t_reply().
-- Alex
-- Sent from my Samsung mobile, and thus lacking in the refinement one might expect from a proper keyboard.
Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Web: http://www.evaristesys.com/
Alex Balashov abalashov@evaristesys.com wrote: Hello,
I am using the latest cloned 3.3 branch and performing a uac_replace_from() operation. After the operation, I do msg_apply_changes().
My 'uac' modparams are:
modparam("uac", "rr_from_store_param", "vsfc") modparam("uac", "restore_mode", "auto") modparam("uac", "restore_passwd", "xxxxxxxxx")
However, the modified From URI is getting back to the originator, both in internally generated errors, and in relayed replies.
This didn't used to happen before 3.3, but has been outstanding for quite some time (I didn't look at it much until now). Is there some possibility that there is a >= 3.3 bug? Or, have I simply misconfigured something?
Thanks!
-- Alex
-- Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda -http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -http://asipto.com/u/kat Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -http://asipto.com/u/katu
-
Alex Balashov -
Daniel-Constantin Mierla