Hi Dan, I modified my config to use a realm called sip.greenfieldtech.net, but the situation remains. Here is the config file: # # $Id$ # # radius config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=udp:192.168.2.80 #alias="openser.org" #fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- mpath="/usr/local/lib/openser/modules" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "avpops.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "xlog.so" loadmodule "uri.so" loadmodule "acc.so" loadmodule "auth.so" loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc","db_url","mysql://openser:openserrw@localhost/openser") modparam("usrloc", "db_mode", 2) # -- acc params -- #modparam("acc", "radius_flag", 1) #modparam("acc", "radius_missed_flag", 2) #modparam("acc", "log_flag", 1) #modparam("acc", "log_missed_flag", 1) #modparam("acc", "service_type", 15) #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("auth_radius|group_radius|avp_radius", "radius_config","/etc/radiusclient/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 0) # -- avpops params -- avp_aliases="day=i:101;time=i:102" # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("usrloc", "use_domain", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # check if user is suspended #if(is_method("REGISTER|INVITE|MESSAGE|OPTIONS|SUBSCRIBE")) #{ # if (radius_is_user_in("From", "suspended")) { # sl_send_reply("403", "Forbidden - suspended"); # exit; # }; #}; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time #acc_rad_request("200 ok"); #acc_log_request("200 ok"); } route(1); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags setflag(1); setflag(2); }; if (!uri==myself) { # check if user is allowed to do voip calls to other domains if(is_method("INVITE|MESSAGE")) { if (!radius_is_user_in("From", "voip")) { sl_send_reply("403", "Forbidden VoIP"); exit; }; }; # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { # authenticate registers if (method=="REGISTER") { if (!radius_www_authorize("sip.greenfieldtech.net")) { www_challenge("sip.greenfieldtech.net", "1"); exit; }; if (radius_www_authorize("sip.greenfieldtech.net")) { sl_send_reply("200", "ok"); exit; }; # check the src ip address #if(!avp_check("$avp(i:2)", "eq/$src_ip/ig")) #{ # sl_send_reply("403", "Forbidden IP"); # exit; #}; save("location"); exit; }; # calls to pstn if(uri=~"sip:00[1-9][0-9]+@") { if(is_method("INVITE") && !has_totag()) { if (!radius_is_user_in("From", "pstn")) { sl_send_reply("403", "Forbidden PSTN"); exit; }; }; # set gateway address rewritehostport("10.10.10.10:5090"); route(1); }; # load callee's avps if(avp_load_radius("callee")) { # check if user has time filter enabled #if(avp_check($avp("i:3"), $avp("eq/i:1"))) #{ # print time in an avp # avp_printf("i:100", "$Tf"); # extract day # avp_subst("i:100/i:101", "/(.{3}) .+/*\1*/"); # if(!avp_check("i:6", "fm/$day")) { # sl_send_reply("403", "Forbidden - day"); # exit; # }; # # extract 'hours:minutes' # avp_subst("i:100/i:102", "/(.{10}) (.{5}):.+/\2/"); # if((is_avp_set("i:4") && avp_check("i:4", "gt/$time")) # || (is_avp_set("i:5") && avp_check("i:5", "lt/$time"))) { # sl_send_reply("403", "Forbidden - time"); # exit; # }; #}; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # log to acc as missed call #acc_rad_request("404 Not Found"); #acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } # generic forward route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } # Version is 1.2.1 Z2L ----- Original Message ----- From: "Dan-Cristian Bogos" <dan.bogos(a)gmail.com> To: openser(a)zap2link.com Cc: "users" <users(a)openser.org> Sent: Wednesday, July 18, 2007 2:02:11 PM (GMT+0200) Asia/Jerusalem Subject: Re: [OpenSER-Users] Radius integration issue Can u post your openser configuration + version also? From the debug u sent it all looks fine except the error. DanB On 7/18/07, OpenSER ML <openser(a)zap2link.com> wrote: