20 Sep
2012
20 Sep
'12
6:12 p.m.
Hello,
I am testing the "topology hiding" module (topoh) on kamailio-3.2.0 and
every-time I start kamailio I get these error messages related with the
topoh module:
Sep 20 16:51:14 trd-sgw1 /usr/proxy/kamailio/sbin/kamailio[31768]:
ERROR: topoh [th_mask.c:79]: +++
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789.-
Sep 20 16:51:14 trd-sgw1 /usr/proxy/kamailio/sbin/kamailio[31768]:
ERROR: topoh [th_mask.c:80]: +++
y0GxFtSUVeTOMWzHPam.jKR93gCoNpkicrJBqIEhvYbnd175AfLl4u6wZs-X8Q2D
I am only getting those errors when kamailio is starting. Kamailio runs
fine and it hides my internal topology, on the SIP Headers, without any
error message.
I tried to add/modify/remove several topoh parameters but I am always
getting those errors starting kamailio.
Any idea why I getting it? How can I get rid of it?
I don't feel comfortable to apply that configuration on my production
servers knowing that kamailio outputs an error when starting.
Thanks,
- Miguel Baptista
21 Sep
21 Sep
10:25 a.m.
Hello,
On 9/20/12 5:12 PM, Miguel Baptista wrote:
Hello,
I am testing the "topology hiding" module (topoh) on kamailio-3.2.0
and every-time I start kamailio I get these error messages related
with the topoh module:
Sep 20 16:51:14 trd-sgw1 /usr/proxy/kamailio/sbin/kamailio[31768]:
ERROR: topoh [th_mask.c:79]: +++
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789.-
Sep 20 16:51:14 trd-sgw1 /usr/proxy/kamailio/sbin/kamailio[31768]:
ERROR: topoh [th_mask.c:80]: +++
y0GxFtSUVeTOMWzHPam.jKR93gCoNpkicrJBqIEhvYbnd175AfLl4u6wZs-X8Q2D
I am only getting those errors when kamailio is starting. Kamailio
runs fine and it hides my internal topology, on the SIP Headers,
without any error message.
I tried to add/modify/remove several topoh parameters but I am always
getting those errors starting kamailio.
Any idea why I getting it? How can I get rid of it?
I don't feel comfortable to apply that configuration on my production
servers knowing that kamailio outputs an error when starting.
those messages are for debugging purposes, not real errors. The prefix
"ERROR:" is added because they are printed to log level L_ERR. I will
change them to be printed to L_DBG, they were forgotten like this.
Btw, you should use the latest in 3.2.x series, because there were many
fixes done since 3.2.0. If you start a new deployment, better start with
latest 3.3.x.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu
25 Sep
25 Sep
11:34 a.m.
On 21.09.2012 09:25, Daniel-Constantin Mierla wrote:
Hello,
On 9/20/12 5:12 PM, Miguel Baptista wrote:
Ok. Thanks for
the info. If you will fix this "typo" I suppose I don't
have to open a bug report.
Hello,
I am testing the "topology hiding" module (topoh) on kamailio-3.2.0
and every-time I start kamailio I get these error messages related
with the topoh module:
Sep 20 16:51:14 trd-sgw1
/usr/proxy/kamailio/sbin/kamailio[31768]: ERROR: topoh
[th_mask.c:79]: +++
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789.-
Sep 20 16:51:14 trd-sgw1
/usr/proxy/kamailio/sbin/kamailio[31768]: ERROR: topoh
[th_mask.c:80]: +++
y0GxFtSUVeTOMWzHPam.jKR93gCoNpkicrJBqIEhvYbnd175AfLl4u6wZs-X8Q2D
I am only getting those errors when kamailio is starting. Kamailio
runs fine and it hides my internal topology, on the SIP Headers,
without any error message.
I tried to add/modify/remove several topoh parameters but I am always
getting those errors starting kamailio.
Any idea why I getting it? How can I get rid of it?
I don't feel comfortable to apply that configuration on my production
servers knowing that kamailio outputs an error when starting.
those messages are for debugging purposes, not real errors. The prefix
"ERROR:" is added because they are printed to log level L_ERR. I will
change them to be printed to L_DBG, they were forgotten like this.
Btw, you should use the latest in 3.2.x series, because there were
many fixes done since 3.2.0. If you start a new deployment, better
start with latest 3.3.x.
Thanks for the tip.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu
11:58 a.m.
On 9/25/12 10:34 AM, Miguel Baptista wrote:
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu
On 21.09.2012 09:25, Daniel-Constantin Mierla wrote:
No, it is already committed in the git master branch.
Cheers,
Daniel
Hello,
On 9/20/12 5:12 PM, Miguel Baptista wrote:
Ok.
Thanks for the info. If you will fix this "typo" I suppose I don't
have to open a bug report. Hello,
I am testing the "topology hiding" module (topoh) on kamailio-3.2.0
and every-time I start kamailio I get these error messages related
with the topoh module:
Sep 20 16:51:14 trd-sgw1
/usr/proxy/kamailio/sbin/kamailio[31768]: ERROR: topoh
[th_mask.c:79]: +++
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789.-
Sep 20 16:51:14 trd-sgw1
/usr/proxy/kamailio/sbin/kamailio[31768]: ERROR: topoh
[th_mask.c:80]: +++
y0GxFtSUVeTOMWzHPam.jKR93gCoNpkicrJBqIEhvYbnd175AfLl4u6wZs-X8Q2D
I am only getting those errors when kamailio is starting. Kamailio
runs fine and it hides my internal topology, on the SIP Headers,
without any error message.
I tried to add/modify/remove several topoh parameters but I am
always getting those errors starting kamailio.
Any idea why I getting it? How can I get rid of it?
I don't feel comfortable to apply that configuration on my
production servers knowing that kamailio outputs an error when starting.
those messages are for debugging purposes, not real errors. The
prefix "ERROR:" is added because they are printed to log level L_ERR.
I will change them to be printed to L_DBG, they were forgotten like this.
Btw, you should use the latest in 3.2.x series, because there were
many fixes done since 3.2.0. If you start a new deployment, better
start with latest 3.3.x.
Thanks for the tip.
Cheers,
Daniel
--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda -http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 -http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 -http://asipto.com/u/katu
4444
days inactive
4449
days old
3 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Miguel Baptista