First make sure you have a dictionary file that defines Sip-Rpid (it was at one point defined as SER-Rpid). Then in your reply to a user authentication packet you can put the value you wish to use in the RPID SER appends as a header (ie. mine is "Evan Borgstrom" <sip:xxxx@ca.mci.com>) Now that the radius server is sending the Rpid attribute back you need to call append_rpid_hf like so: append_rpid_hf("", ";party=calling;id-type=subscriber;privacy=off;screen=yes"); If you change the privacy flag from off to full and your PSTN end point is RFC compliant it should block the ANI of your call when it releases into the TDM network. -Evan miliczo(a)sezampro.yu wrote: > Hi, > In "SIP Express Router RADIUS HOWTO" by Jan Janak I've read that by > adding the Sip-Rpid field in my freeradius user file "SIP Express Router > can be configured to put the phone number into Remote-Party-ID header > field of the SIP message" > > Well, my question is, can I use the Rpid field and put it in the Caller > id field and how.? > If anybody has done this or even thinks he has a clue, please help. > > > Thanks > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers