Hi All,

I'm trying use to Diameter Server Client (DISC) for the authentication purpose (using the auth_diameter module). But I'm facing issues while creating a connection between openSER and DISC. The diameter client does not accept the connection from the openSER.

Please let me know if somebody has tried this out and can pass me the config files and the code changes if any.

Thanks, Priyanka

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

Hi Ravi,

Thanks for your quick response. I'm actually connecting openSER with the diameter client. But the client is not accepting the connection. The configuration between the diameter client and server are already done. And they are communicating properly the only problem is the communication between the Diameter Client and the openSER.

Thanks,

Priyanka

________________________________

From: raviprakash sunkara [mailto:sunkara.raviprakash.feb14@gmail.com] Sent: Tuesday, March 27, 2007 2:16 PM To: Priyanka Bhargava (WT01 - IP-Multimedia Carrier & Ent Networks) Cc: users@openser.org Subject: Re: [Users] Problem configuring the openSER with the DISC

Hello Priyanka, Diameter and radius both are same purpose. DialMeter Server never communicate with OpenSER, Vice versa, So Need the DiaMeter client, Which play the main role to Both openSER or Diameter,

U problem in Diameter Clinet and server Configuration,

-UA -------->OpenSER-->DiameterClient ---> Diameter Server. in DiC u should configured the authentation, where the Server is located.

I'm Using the Radius for AAA,

Thanks & Regards Sunkara Ravi Prakash Hyd.....

On 3/27/07, priyanka.bhargava@wipro.com < priyanka.bhargava@wipro.com> wrote:

Hi All,

I'm trying use to Diameter Server Client (DISC) for the authentication purpose (using the auth_diameter module). But I'm facing issues while creating a connection between openSER and DISC. The diameter client does

not accept the connection from the openSER.

Please let me know if somebody has tried this out and can pass me the config files and the code changes if any.

Thanks, Priyanka

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com

_______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Klaus Darilion a écrit :

The only identifier which is REGISTERed is the current location of the SIP client (ipaddress:port). This gets mapped to the SIP AoR (the user's SIP address).

A user can use several clients concurrently. Then this user will show up multiple times in the location table - one entry for each SIP client.

Hope this helps - I still don't understand what you want to achieve.

regards klaus

Bodin Bruno wrote:

...

Hi, Is it possible to register two (or more) identifiers by user, such as phone number, username or service ? Thank

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Hi, In some steps,

what I do :

step 1. Softphone clients are registered in openser with authentification (digest etc....) step 2. Openser use radius to check them (with ldap) step 3. Openser do save("location") to store softphone address.

What I need :

after step 3, authenticate username, and phone number of client are usable to call them.

What I don't need :

currently, the username used to call a softphone is the only choice of this user and this choice isn't limited.

I'm sorry for my poor english, i'm french student.

thank for your help