Hi every body
My SER is behind NAT, so when SER forward INVITE message, the VIA must be set to the public IP
How?
Thank you very much.
王振中 wangzz
艾诺通信系统（苏州）有限责任公司
苏州工业园区国际科技园一期203A
wangzz@avonaco.com
============================================
WANG Zhenzhong wrote:
My SER is behind NAT, so when SER forward INVITE message, the VIA must be set to the public IP
How?
Chapter 8 of "SER Getting Started" should help you with the general idea: http://www.iptel.org/ser/doc/gettingstarted
Regards, Martin
Hi,
Can I use them together? the fix_nated_sdp() function in nethelper is necessary to fix some applications that may look into SDP message and change contact regarding to that. The fix_contact() function in mediarpxy module seems to me only modify the contact field in sip message header, not in the SDP.
Ling
lin9k@yahoo.com wrote:
Can I use them together? the fix_nated_sdp() function in nethelper is necessary to fix some applications that may look into SDP message and change contact regarding to that. The fix_contact() function in mediarpxy module seems to me only modify the contact field in sip message header, not in the SDP.
Shouldn't be a problem.
Regards, Martin
Hi,
I did exactly the same thing and it worked without any problems.
Regards Tomasz
2009/1/10 lin9k@yahoo.com
Hi,
Can I use them together? the fix_nated_sdp() function in nethelper is necessary to fix some applications that may look into SDP message and change contact regarding to that. The fix_contact() function in mediarpxy module seems to me only modify the contact field in sip message header, not in the SDP.
Ling
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
lin9k＠yahoo.com -
Martin Hoffmann -
Tomasz Zieleniewski -
WANG Zhenzhong