I can't help you with the cvs version as I never used it (and it will cause problems as its under heavy developement). If you don't need IPv4-IPv6 translation and separation of rtpproxy from ser, than I suggest to use 0.8.12 stable and the corresponding rtpproxy.

ethereal: just sniff all packets without filter. You should see the RTP streams sent to the IP address and port numbers in the SDP of INVITE and 200 OK.

Watch for ICMP errors.

Klaus

Fábio Silvestri wrote:

I'm using cvs version of ser on outbound proxy, and tgz of rtpproxy cvs version of rtpproxy, I got 'rtpproxy syntax error' messages.

Klaus, what kind of information on ethereal I need to look?

Klaus Darilion wrote:

...

You have to use rtpproxy v20040105 if you're working with 0.8.12 stable.

What do you mean with "both clients behind a proxy"? The clients are registered at different proxies? Then only one proxy has to enable the rtpproxy.

klaus

Fábio Silvestri wrote:

...

After cvs update on rtpproxy, now I'm getting this message when running:

# rtpproxy -2f:

rtpproxy: rtpproxy started, pid 1681 rtpproxy: command syntax error rtpproxy: command syntax error rtpproxy: command syntax error rtpproxy: command syntax error rtpproxy: command syntax error

Fábio Silvestri wrote:

...

Hi!

I have a outbound proxy configured and working very well, but I have a little problem, when both clientes are registered on SER and behind a proxy!

The call's don't work, or the phone rings one time only, and in all cases the return voice, can't be listen.

Klaus, i'm using a script I have founded from you!

Regards.

Klaus Darilion wrote:

...

Hi Fabio!

Just replace your condition in the reply route with my condition.

No, you don't need to any special commands for the rtpproxy.

Yes I have sample cfg - i already postet is ome time ago - search the archive.

regards, klaus

PS: cc to the list

Fabio Silvestri wrote:

...

Well, where do I need to include that code if { } on my ser.cfg?

Do you have a sample cfg?

How do I need to run rtpproxy, have some special command line?

On Mon, 1 Mar 2004, Klaus Darilion wrote:

> Date: Mon, 01 Mar 2004 09:35:12 +0100 > From: Klaus Darilion klaus.mailinglists@pernau.at > To: Fábio Silvestri fabio@informatec.com.br > Cc: serusers@lists.iptel.org > Subject: Re: [Serusers] SER and rtpproxy > > > > Fábio Silvestri wrote: > > >> Hi! >> >> After a long search on maillinst, I'm trying to run SER with >> rtpproxy, for resolve problems with SIP UA (ata186) behind a >> nat, but I'm still get in trouble. >> >> I have setup ser.cfg to use rtpproxy, like this: >> >> ... >> if (method=="INVITE") { >> log(1,"INVITE\n"); >> fix_nated_sdp("1"); >> record_route(); >> force_rport(); >> setflag(1); >> force_rtp_proxy(); >> t_on_reply("1"); >> } >> ... >> onreply_route[1] { >> log(1, ">=====> reply 1\n"); >> if ((status=~"[12][0-9][0-9]")) { >> force_rtp_proxy(); >> } >> } >> ... >> >> But I get this error on syslog: >> >> 0(5463) ERROR: extract_mediaip: no `c=' in SDP >> > > This will happen when you try to rewrite a response without sdp, > e.g. 100 trying, 180 ringing.... > > I'm unsing: > if ( (status=~"200" || status=~"183") ) { > force_rtp_proxy(); > > >> I'm running rtpproxy, on linux shell without any parameters. >> >> Does anybody knows what this means that message, and how to >> solve, a ser.cfg for rtpproxy, and others tips will be helpfull... >> >> Regards. >> >

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers