Hi all

I try to configure kamailio to register sip client with freeradius via kamailio.

My configure as:

###################kamailio.cfg#############

#!KAMAILIO

#

# $Id$

#

# Kamailio (OpenSER) SIP Server v3.0 - basic configuration script

# - web: http://www.kamailio.org

# - git: http://sip-router.org

#

# Direct your questions about this file to: users@lists.kamailio.org

#

# Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php

# for an explanation of possible statements, functions and parameters.

#

# Several features can be enabled using '#!define WITH_FEATURE' directives:

#

# *** To run in debug mode:

#!define WITH_DEBUG

#

# *** To enable mysql:

#!define WITH_MYSQL

#

# *** To enable authentication execute:

# - enable mysql

#!define WITH_AUTH

# - add users using 'kamctl'

#

# *** To enable persistent user location execute:

# - enable mysql

# - define WITH_USRLOCDB

#

# *** To enable presence server execute:

# - enable mysql

# - define WITH_PRESENCE

#

# *** To enable nat traversal execute:

# - define WITH_NAT

# - install RTPProxy: http://www.rtpproxy.org

# - start RTPProxy:

# rtpproxy -l _your_public_ip_ -s udp:localhost:7722

#

# *** To enable PSTN gateway routing execute:

# - define WITH_PSTN

# - set the value of pstn.gw_ip

# - check route[PSTN] for regexp routing condition

#

# *** To enhance accounting execute:

# - enable mysql

# - define WITH_ACCDB

# - add following columns to database

#!ifdef ACCDB_COMMENT

ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';

ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';

ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';

ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';

ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';

ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';

ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';

ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';

ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';

ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';

#!endif

####### Global Parameters #########

#!ifdef WITH_DEBUG

debug=4

log_stderror=no

#!else

debug=2

log_stderror=no

#!endif

memdbg=5

memlog=5

log_facility=LOG_LOCAL0

fork=yes

children=4

/* uncomment the next line to disable TCP (default on) */

#disable_tcp=yes

/* uncomment the next line to disable the auto discovery of local aliases

based on revers DNS on IPs (default on) */

#auto_aliases=no

port=5060

/* uncomment and configure the following line if you want Kamailio to

bind on a specific interface/port/proto (default bind on all available) */

#listen=udp:10.0.0.10:5060

####### Custom Parameters #########

# These parameters can be modified runtime via RPC interface

# - see the documentation of 'cfg_rpc' module.

#

# Format: group.id = value 'desc' description

# Access: $sel(cfg_get.group.id) or @cfg_get.group.id

#

#!ifdef WITH_PSTN

# PSTN GW Routing

#

# - pstn.gw_ip: valid IP or hostname as string value, example:

# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"

#

# - by default is empty to avoid misrouting

pstn.gw_ip = "" desc "PSTN GW Address"

#!endif

####### Modules Section ########

#set module path

mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/"

/* uncomment next line for MySQL DB support */

#!ifdef WITH_MYSQL

loadmodule "db_mysql.so"

#!endif

loadmodule "mi_fifo.so"

loadmodule "kex.so"

loadmodule "tm.so"

loadmodule "tmx.so"

loadmodule "sl.so"

loadmodule "rr.so"

loadmodule "pv.so"

loadmodule "maxfwd.so"

loadmodule "usrloc.so"

loadmodule "registrar.so"

loadmodule "textops.so"

loadmodule "uri_db.so"

loadmodule "siputils.so"

loadmodule "xlog.so"

loadmodule "sanity.so"

loadmodule "ctl.so"

loadmodule "mi_rpc.so"

loadmodule "acc.so"

#!ifdef WITH_AUTH

loadmodule "auth.so"

loadmodule "auth_radius.so"

#!endif

/* uncomment next line for aliases support

NOTE: a DB (like db_mysql) module must be also loaded */

#loadmodule "alias_db.so"

/* uncomment next line for multi-domain support

NOTE: a DB (like db_mysql) module must be also loaded

NOTE: be sure and enable multi-domain support in all used modules

(see "multi-module params" section ) */

#loadmodule "domain.so"

#!ifdef WITH_PRESENCE

loadmodule "presence.so"

loadmodule "presence_xml.so"

#!endif

#!ifdef WITH_NAT

loadmodule "nathelper.so"

#!endif

# ----------------- setting module-specific parameters ---------------

# ----- mi_fifo params -----

modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")

# ----- rr params -----

# add value to ;lr param to cope with most of the UAs

modparam("rr", "enable_full_lr", 1)

# do not append from tag to the RR (no need for this script)

modparam("rr", "append_fromtag", 0)

# ----- rr params -----

modparam("registrar", "method_filtering", 1)

/* uncomment the next line to disable parallel forking via location */

# modparam("registrar", "append_branches", 0)

/* uncomment the next line not to allow more than 10 contacts per AOR */

#modparam("registrar", "max_contacts", 10)

# ----- uri_db params -----

/* by default we disable the DB support in the module as we do not need it

in this configuration */

modparam("uri_db", "use_uri_table", 0)

modparam("uri_db", "db_url", "")

# ----- acc params -----

/* what sepcial events should be accounted ? */

modparam("acc", "early_media", 1)

modparam("acc", "report_ack", 1)

modparam("acc", "report_cancels", 1)

/* by default ww do not adjust the direct of the sequential requests.

if you enable this parameter, be sure the enable "append_fromtag"

in "rr" module */

modparam("acc", "detect_direction", 0)

/* account triggers (flags) */

modparam("acc", "failed_transaction_flag", 3)

modparam("acc", "log_flag", 1)

modparam("acc", "log_missed_flag", 2)

modparam("acc", "log_extra",

"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")

/* enhanced DB accounting */

#!ifdef WITH_ACCDB

modparam("acc", "db_flag", 1)

modparam("acc", "db_missed_flag", 2)

modparam("acc", "db_url",

"mysql://openser:openserrw@localhost/openser")

modparam("acc", "db_extra",

"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")

#!endif

# ----- usrloc params -----

/* enable DB persistency for location entries */

#!ifdef WITH_USRLOCDB

modparam("usrloc", "db_mode", 2)

modparam("usrloc", "db_url",

"mysql://openser:openserrw@localhost/openser")

#!endif

# ----- auth_db params -----

/* enable the DB based authentication */

#!ifdef WITH_AUTH

#modparam("auth_db", "calculate_ha1", yes)

#modparam("auth_db", "password_column", "password")

#modparam("auth_db", "db_url",

# "mysql://openser:openserrw@localhost/kamailio")

#modparam("auth_db", "load_credentials", "")

modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")

modparam("auth_radius", "service_type", 15)

modparam("auth_radius", "auth_extra", "Acct-Session-Id=$ci")

modparam("auth_radius", "use_ruri_flag", 22)

#!endif

# ----- alias_db params -----

/* uncomment the following lines if you want to enable the DB based

aliases */

#modparam("alias_db", "db_url",

# "mysql://openser:openserrw@localhost/openser")

# ----- domain params -----

/* uncomment the following lines to enable multi-domain detection

support */

#modparam("domain", "db_url",

# "mysql://openser:openserrw@localhost/openser")

#modparam("domain", "db_mode", 1) # Use caching

# ----- multi-module params -----

/* uncomment the following line if you want to enable multi-domain support

in the modules (dafault off) */

#modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)

# ----- presence params -----

/* enable presence server support */

#!ifdef WITH_PRESENCE

modparam("presence|presence_xml", "db_url",

"mysql://openser:openserrw@localhost/openser")

modparam("presence_xml", "force_active", 1)

modparam("presence", "server_address", "sip:10.0.0.10:5060")

#!endif

# ----- nathelper -----

#!ifdef WITH_NAT

modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7722")

modparam("nathelper", "natping_interval", 30)

modparam("nathelper", "ping_nated_only", 1)

modparam("nathelper", "sipping_bflag", 7)

modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")

modparam("registrar|nathelper", "received_avp", "$avp(i:80)")

modparam("usrloc", "nat_bflag", 6)

#!endif

####### Routing Logic ########

# main request routing logic

route{

if (!mf_process_maxfwd_header("10")) {

sl_send_reply("483","Too Many Hops");

exit;

}

if(!sanity_check("1511", "7"))

{

xlog("Malformed SIP message from $si:$sp\n");

exit;

}

# NAT detection

route(NAT);

if (has_totag()) {

# sequential request withing a dialog should

# take the path determined by record-routing

if (loose_route()) {

if (is_method("BYE")) {

setflag(1); # do accounting ...

setflag(3); # ... even if the transaction fails

}

route(RELAY);

} else {

if (is_method("SUBSCRIBE") && uri == myself) {

# in-dialog subscribe requests

route(PRESENCE);

exit;

}

if ( is_method("ACK") ) {

if ( t_check_trans() ) {

# non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server

t_relay();

exit;

} else {

# ACK without matching transaction ... ignore and discard.\n");

exit;

}

}

sl_send_reply("404","Not here");

}

exit;

}

#initial requests

# CANCEL processing

if (is_method("CANCEL"))

{

if (t_check_trans())

t_relay();

exit;

}

t_check_trans();

# authentication

route(AUTH);

# record routing for dialog forming requests (in case they are routed)

# - remove preloaded route headers

remove_hf("Route");

if (is_method("INVITE|SUBSCRIBE"))

record_route();

# account only INVITEs

if (is_method("INVITE")) {

setflag(1); # do accounting

}

if (!uri==myself)

/* replace with following line if multi-domain support is used */

##if (!is_uri_host_local())

{

append_hf("P-hint: outbound\r\n");

route(RELAY);

}

# requests for my domain

if( is_method("PUBLISH|SUBSCRIBE"))

route(PRESENCE);

if (is_method("REGISTER"))

{

if(isflagset(5))

{

setbflag("6");

# uncomment next line to do SIP NAT pinging

## setbflag("7");

}

if (!save("location"))

sl_reply_error();

exit;

}

if ($rU==$null) {

# request with no Username in RURI

sl_send_reply("484","Address Incomplete");

exit;

}

route(PSTN);

# apply DB based aliases (uncomment to enable)

##alias_db_lookup("dbaliases");

if (!lookup("location")) {

switch ($rc) {

case -1:

case -3:

t_newtran();

t_reply("404", "Not Found");

exit;

case -2:

sl_send_reply("405", "Method Not Allowed");

exit;

}

}

# when routing via usrloc, log the missed calls also

setflag(2);

route(RELAY);

}

route[RELAY] {

#!ifdef WITH_NAT

if (check_route_param("nat=yes")) {

setbflag("6");

}

if (isflagset(5) || isbflagset("6")) {

route(RTPPROXY);

}

#!endif

/* example how to enable some additional event routes */

if (is_method("INVITE")) {

#t_on_branch("BRANCH_ONE");

t_on_reply("REPLY_ONE");

t_on_reply("REPLY_ONE");

t_on_failure("FAIL_ONE");

}

if (!t_relay()) {

sl_reply_error();

}

exit;

}

# Presence server route

route[PRESENCE]

{

#!ifdef WITH_PRESENCE

if (!t_newtran())

{

sl_reply_error();

exit;

};

if(is_method("PUBLISH"))

{

handle_publish();

t_release();

}

else

if( is_method("SUBSCRIBE"))

{

handle_subscribe();

t_release();

}

exit;

#!endif

# if presence enabled, this part will not be executed

if (is_method("PUBLISH") || $rU==$null)

{

sl_send_reply("404", "Not here");

exit;

}

return;

# Authentication route

route[AUTH] {

#!ifdef WITH_AUTH

if (is_method("REGISTER"))

{

# authenticate the REGISTER requests (uncomment to enable auth)

if (!radius_www_authorize("192.168.1.70"))

{

www_challenge("192.168.1.70", "0");

exit;

}

if ($au!=$tU)

{

sl_send_reply("403","Forbidden auth ID");

exit;

}

} else {

# authenticate if from local subscriber (uncomment to enable auth)

if (from_uri==myself)

{

if (!radius_proxy_authorize("192.168.1.70")) {

proxy_challenge("192.168.1.70", "0");

exit;

}

if (is_method("PUBLISH"))

{

if ($au!=$tU) {

sl_send_reply("403","Forbidden auth ID");

exit;

}

} else {

if ($au!=$fU) {

sl_send_reply("403","Forbidden auth ID");

exit;

}

}

consume_credentials();

# caller authenticated

}

}

#!endif

return;

}

# Caller NAT detection route

route[NAT]{

#!ifdef WITH_NAT

force_rport();

if (nat_uac_test("19")) {

if (method=="REGISTER") {

fix_nated_register();

} else {

fix_nated_contact();

}

setflag(5);

}

#!endif

return;

}

# RTPProxy control

route[RTPPROXY] {

#!ifdef WITH_NAT

if (is_method("BYE")) {

unforce_rtp_proxy();

} else if (is_method("INVITE")){

force_rtp_proxy();

}

if (!has_totag()) add_rr_param(";nat=yes");

#!endif

return;

}

# PSTN GW routing

route[PSTN] {

#!ifdef WITH_PSTN

# check if PSTN GW IP is defined

if (strempty($sel(cfg_get.pstn.gw_ip))) {

xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");

return;

}

# route to PSTN dialed numbers starting with '+' or '00'

# (international format)

# - update the condition to match your dialing rules for PSTN routing

if(!($rU=~"^(+|00)[1-9][0-9]{3,20}$"))

return;

# only local users allowed to call

if(from_uri!=myself) {

sl_send_reply("403", "Not Allowed");

exit;

}

$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);

route(RELAY);

exit;

#!endif

return;

}

# Sample branch router

branch_route[BRANCH_ONE] {

xdbg("new branch at $ru\n");

}

# Sample onreply route

onreply_route[REPLY_ONE] {

xdbg("incoming reply\n");

#!ifdef WITH_NAT

if ((isflagset(5) || isbflagset("6")) && status=~"(183)|(2[0-9][0-9])") {

force_rtp_proxy();

}

if (isbflagset("6")) {

fix_nated_contact();

}

#!endif

}

# Sample failure route

failure_route[FAIL_ONE] {

#!ifdef WITH_NAT

if (is_method("INVITE")

&& (isbflagset("6") || isflagset(5))) {

unforce_rtp_proxy();

}

#!endif

if (t_is_canceled()) {

exit;

}

# uncomment the following lines if you want to block client

# redirect based on 3xx replies.

##if (t_check_status("3[0-9][0-9]")) {

##t_reply("404","Not found");

## exit;

##}

# uncomment the following lines if you want to redirect the failed

# calls to a different new destination

##if (t_check_status("486|408")) {

## sethostport("192.168.2.100:5060");

## append_branch();

## # do not set the missed call flag again

## t_relay();

##}

}

##############################################

I run command : kamctl start

But : ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed

And I run : tail -f /var/log/message to show log:

The log is:

Aug 4 15:05:07 appliance kamailio: ERROR: <core> [sr_module.c:390]: ERROR: load_module: could not open module </usr/local/lib/kamailio/modules/auth_radius.so>: libradiusclient-ng.so.2: cannot open shared object file: No such file or directory

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3330]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 145, column 12-27: failed to load module

Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 234, column 92: Can't set module parameter

Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 235, column 43: Can't set module parameter

Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 236, column 60: Can't set module parameter

Aug 4 15:05:07 appliance kamailio: ERROR: <core> [modparam.c:154]: set_mod_param_regex: No module matching <auth_radius> found

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 237, column 44: Can't set module parameter

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 479, column 50: unknown command, missing loadmodule?

Aug 4 15:05:07 appliance kamailio: : <core> [cfg.y:3333]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 494, column 53: unknown command, missing loadmodule?

###############

I try to add : /usr/local/lib/* to /etc/ld.so.conf

And run : ldconfig -v

But the result is the same error .

Please help me if someone know what is wrong.

Any suggest is welcome.

Thanks and Regards

Thanh.Truong