12 Apr
2010
12 Apr
'10
3:19 p.m.
Dear ALL,
I am playing around with kamailio 1.5.
Could somebody explain me what module best fit to route the call on
the basis of number A (calling number).
What is more all rules should be able to be modified directly from mysql db.
I've run through 3.0 modules and figured out that there is drouting
module which is really great, but is it present in 1.5 rel?
If negative, what other modules can be used.
Thx in advance,
Maciej.
12 Apr
12 Apr
6:23 p.m.
I guess i can use SQLOps module plus already configured carrierroute
to achieve my goal:
- call routing based on calling number prefix
- load balancing
- failure routing
Maciej.
Dear ALL,
I am playing around with kamailio 1.5.
Could somebody explain me what module best fit to route the call on
the basis of number A (calling number).
What is more all rules should be able to be modified directly from mysql db.
I've run through 3.0 modules and figured out that there is drouting
module which is really great, but is it present in 1.5 rel?
If negative, what other modules can be used.
Thx in advance,
Maciej.
9:01 p.m.
Hello,
there are couple of other modules that you can use for dialed number routing
- lcr - least cost routing
- pdt
- dialplan
Depending on you needs, one can fit better, or sometimes you can use
combined approach, with other modules such as dispatcher.
Cheers,
Daniel
On 4/12/10 5:23 PM, Maciej Bylica wrote:
I guess i can use SQLOps module plus already
configured carrierroute
to achieve my goal:
- call routing based on calling number prefix
- load balancing
- failure routing
Maciej.
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
Dear ALL,
I am playing around with kamailio 1.5.
Could somebody explain me what module best fit to route the call on
the basis of number A (calling number).
What is more all rules should be able to be modified directly from mysql db.
I've run through 3.0 modules and figured out that there is drouting
module which is really great, but is it present in 1.5 rel?
If negative, what other modules can be used.
Thx in advance,
Maciej.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
9:58 p.m.
Hi Daniel,
Thx for reply. I am about to run through these modules.
Cheers,
Maciej.
Hello,
there are couple of other modules that you can use for dialed number routing
- lcr - least cost routing
- pdt
- dialplan
Depending on you needs, one can fit better, or sometimes you can use
combined approach, with other modules such as dispatcher.
Cheers,
Daniel
On 4/12/10 5:23 PM, Maciej Bylica wrote:
I guess i can use SQLOps module plus already configured carrierroute
to achieve my goal:
- call routing based on calling number prefix
- load balancing
- failure routing
Maciej.
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
Dear ALL,
I am playing around with kamailio 1.5.
Could somebody explain me what module best fit to route the call on
the basis of number A (calling number).
What is more all rules should be able to be modified directly from mysql
db.
I've run through 3.0 modules and figured out that there is drouting
module which is really great, but is it present in 1.5 rel?
If negative, what other modules can be used.
Thx in advance,
Maciej.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
13 Apr
13 Apr
11:06 a.m.
On 4/12/10 8:58 PM, Maciej Bylica wrote:
Hi Daniel,
Thx for reply. I am about to run through these modules.
btw, you said you are playing with 1.5, any particular reason? 3.0 has a
lot better core architecture and new features.
Cheers,
Daniel
Cheers,
Maciej.
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
Hello,
there are couple of other modules that you can use for dialed number routing
- lcr - least cost routing
- pdt
- dialplan
Depending on you needs, one can fit better, or sometimes you can use
combined approach, with other modules such as dispatcher.
Cheers,
Daniel
On 4/12/10 5:23 PM, Maciej Bylica wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
I guess i can use SQLOps module plus already
configured carrierroute
to achieve my goal:
- call routing based on calling number prefix
- load balancing
- failure routing
Maciej.
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
Dear ALL,
I am playing around with kamailio 1.5.
Could somebody explain me what module best fit to route the call on
the basis of number A (calling number).
What is more all rules should be able to be modified directly from mysql
db.
I've run through 3.0 modules and figured out that there is drouting
module which is really great, but is it present in 1.5 rel?
If negative, what other modules can be used.
Thx in advance,
Maciej.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
11:40 a.m.
Hi Daniel,
The main reason is that i have running configuration exactly on 1.5
I am not sure if i can easly copy&paste all stuff from 1.5 (especially
modules configuration)
The last question is about stability of 3.0.
Thx,
Maciej.
2010/4/13 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
On 4/12/10 8:58 PM, Maciej Bylica wrote:
Hi Daniel,
Thx for reply. I am about to run through these modules.
btw, you said you are playing with 1.5, any particular reason? 3.0 has a lot
better core architecture and new features.
Cheers,
Daniel
Cheers,
Maciej.
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
Hello,
there are couple of other modules that you can use for dialed number
routing
- lcr - least cost routing
- pdt
- dialplan
Depending on you needs, one can fit better, or sometimes you can use
combined approach, with other modules such as dispatcher.
Cheers,
Daniel
On 4/12/10 5:23 PM, Maciej Bylica wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
I guess i can use SQLOps module plus already configured carrierroute
to achieve my goal:
- call routing based on calling number prefix
- load balancing
- failure routing
Maciej.
>
> Dear ALL,
>
> I am playing around with kamailio 1.5.
> Could somebody explain me what module best fit to route the call on
> the basis of number A (calling number).
> What is more all rules should be able to be modified directly from
> mysql
> db.
> I've run through 3.0 modules and figured out that there is drouting
> module which is really great, but is it present in 1.5 rel?
>
> If negative, what other modules can be used.
>
> Thx in advance,
> Maciej.
>
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
11:47 a.m.
Hello,
On 4/13/10 10:40 AM, Maciej Bylica wrote:
Hi Daniel,
The main reason is that i have running configuration exactly on 1.5
I am not sure if i can easly copy&paste all stuff from 1.5 (especially
modules configuration)
modules configuration is mostly the same for majority of modules, just
TM has changed substantially. Here is a page collecting hints about
migration:
http://www.kamailio.org/dokuwiki/doku.php/install:1.5.x-to-3.0.0
The last question is about stability of 3.0.
3.0 proved very stable so far, it was lot tested, i wrote about it at:
http://www.kamailio.org/w/2010/03/remarks-about-v3-0-x-strong-stability/
I thought you start now, which would have been odd to begin with an
older version, but if you improve an existing system, then I understand.
Cheers,
Daniel
Thx,
Maciej.
2010/4/13 Daniel-Constantin Mierla<miconda(a)gmail.com>om>:
>
> On 4/12/10 8:58 PM, Maciej Bylica wrote:
>
>> Hi Daniel,
>>
>> Thx for reply. I am about to run through these modules.
>>
>>
> btw, you said you are playing with 1.5, any particular reason? 3.0 has a lot
> better core architecture and new features.
>
> Cheers,
> Daniel
>
>
>> Cheers,
>> Maciej.
>>
>>
>>
>>
>>> Hello,
>>>
>>> there are couple of other modules that you can use for dialed number
>>> routing
>>> - lcr - least cost routing
>>> - pdt
>>> - dialplan
>>>
>>> Depending on you needs, one can fit better, or sometimes you can use
>>> combined approach, with other modules such as dispatcher.
>>>
>>> Cheers,
>>> Daniel
>>>
>>> On 4/12/10 5:23 PM, Maciej Bylica wrote:
>>>
>>>
>>>> I guess i can use SQLOps module plus already configured carrierroute
>>>> to achieve my goal:
>>>> - call routing based on calling number prefix
>>>> - load balancing
>>>> - failure routing
>>>>
>>>> Maciej.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> Dear ALL,
>>>>>
>>>>> I am playing around with kamailio 1.5.
>>>>> Could somebody explain me what module best fit to route the call on
>>>>> the basis of number A (calling number).
>>>>> What is more all rules should be able to be modified directly from
>>>>> mysql
>>>>> db.
>>>>> I've run through 3.0 modules and figured out that there is
drouting
>>>>> module which is really great, but is it present in 1.5 rel?
>>>>>
>>>>> If negative, what other modules can be used.
>>>>>
>>>>> Thx in advance,
>>>>> Maciej.
>>>>>
>>>>>
>>>>>
>>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>>
>>>>
>>> --
>>> Daniel-Constantin Mierla * http://www.asipto.com/ *
>>> http://twitter.com/miconda *
>>> http://www.linkedin.com/in/danielconstantinmierla
>>>
>>>
>>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
> --
> Daniel-Constantin Mierla * http://www.asipto.com/ *
> http://twitter.com/miconda *
> http://www.linkedin.com/in/danielconstantinmierla
>
>
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
12:17 p.m.
Daniel,
Thx for pointing me to Your docs covering stability and upgrade remarks.
So You've convinced me to upgrade to 3.0 rel. :)
But, first I need to configure calling number routing ASAP.
Then i will be having more time to do the upgrade.
Anyway thx for clearing this up.
Maciej
2010/4/13 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Hello,
On 4/13/10 10:40 AM, Maciej Bylica wrote:
Hi Daniel,
The main reason is that i have running configuration exactly on 1.5
I am not sure if i can easly copy&paste all stuff from 1.5 (especially
modules configuration)
modules configuration is mostly the same for majority of modules, just TM
has changed substantially. Here is a page collecting hints about migration:
http://www.kamailio.org/dokuwiki/doku.php/install:1.5.x-to-3.0.0
The last question is about stability of 3.0.
3.0 proved very stable so far, it was lot tested, i wrote about it at:
http://www.kamailio.org/w/2010/03/remarks-about-v3-0-x-strong-stability/
I thought you start now, which would have been odd to begin with an older
version, but if you improve an existing system, then I understand.
Cheers,
Daniel
Thx,
Maciej.
2010/4/13 Daniel-Constantin Mierla<miconda(a)gmail.com>om>:
>
> On 4/12/10 8:58 PM, Maciej Bylica wrote:
>
>>
>> Hi Daniel,
>>
>> Thx for reply. I am about to run through these modules.
>>
>>
>
> btw, you said you are playing with 1.5, any particular reason? 3.0 has a
> lot
> better core architecture and new features.
>
> Cheers,
> Daniel
>
>
>>
>> Cheers,
>> Maciej.
>>
>>
>>
>>
>>>
>>> Hello,
>>>
>>> there are couple of other modules that you can use for dialed number
>>> routing
>>> - lcr - least cost routing
>>> - pdt
>>> - dialplan
>>>
>>> Depending on you needs, one can fit better, or sometimes you can use
>>> combined approach, with other modules such as dispatcher.
>>>
>>> Cheers,
>>> Daniel
>>>
>>> On 4/12/10 5:23 PM, Maciej Bylica wrote:
>>>
>>>
>>>>
>>>> I guess i can use SQLOps module plus already configured carrierroute
>>>> to achieve my goal:
>>>> - call routing based on calling number prefix
>>>> - load balancing
>>>> - failure routing
>>>>
>>>> Maciej.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>
>>>>> Dear ALL,
>>>>>
>>>>> I am playing around with kamailio 1.5.
>>>>> Could somebody explain me what module best fit to route the call on
>>>>> the basis of number A (calling number).
>>>>> What is more all rules should be able to be modified directly from
>>>>> mysql
>>>>> db.
>>>>> I've run through 3.0 modules and figured out that there is
drouting
>>>>> module which is really great, but is it present in 1.5 rel?
>>>>>
>>>>> If negative, what other modules can be used.
>>>>>
>>>>> Thx in advance,
>>>>> Maciej.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>> list
>>>> sr-users(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> Daniel-Constantin Mierla * http://www.asipto.com/ *
>>> http://twitter.com/miconda *
>>> http://www.linkedin.com/in/danielconstantinmierla
>>>
>>>
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>>
>
> --
> Daniel-Constantin Mierla * http://www.asipto.com/ *
> http://twitter.com/miconda *
> http://www.linkedin.com/in/danielconstantinmierla
>
>
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
5337
days inactive
5338
days old
7 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Maciej Bylica