Klaus,
All calls are going through OpenSER from the phones. However, they don't go BACK to OpenSER. Asterisk terminates the call. Putting all calls BACK through OpenSER would be a nightmare. It would make a lot of Asterisk features such as ACD Queues, MeetMe Conferencing etc very hard to manage. I'm not even sure if they would work.
Doug.
-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, December 15, 2005 8:23 AM To: Douglas Garstang Cc: users@openser.org Subject: Re: [Users] Transaction already in Process
I can't explain it, but I do not like the idea replicating with failure routes ...
IMO it would be better to modify t_replicate to allow to replicate to moultiple instances.
Would i be possible to route all calls via openser? Then you do not need the location info in the Asterisks.
regards klaus
Douglas Garstang wrote:
Klaus,
Asterisk can't use a database for location/contact information. It also has no native means to transfer registrations between itself and another Asterisk system. It can't even perform a user defined action when a phone registers... doesn't leave us with many options. Right now, using OpenSER to replicate (forward,t_relay,t_replicate whatever) seems to be working ok. Do you have any reason to believe it wouldn't scale up well?
Doug.
-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, December 15, 2005 3:23 AM To: Douglas Garstang Cc: users@openser.org Subject: Re: [Users] Transaction already in Process
Hi Douglas!
I still think it is a bad idea to replicate REGISTER to Asterisk 4 times. Where does Asterisk store the location table? In a database? Why not replicate the location data on DB level?
regards klaus
Douglas Garstang wrote:
Arrgh!
Now I'm getting "t_newtran: transaction already in process" messages whenever I try to call t_relay() or t_replicate twice, even when the first attempt has FAILED. In the case of t_relay() I have new addresses in the destination set and I still get this error. Why? When you attempt to deliver, and it fails, how can to attempt again without getting those messages? What fundamental piece am I missing?
How could I do this? Forget the fancy stuff. I don't care about checking for failure anymore.
t_replicate("192.168.10.7","5060"); t_replicate("192.168.10.8","5060"); t_replicate("192.168.10.200","5060");
Doug.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
So how does it look like when Client A calls Client B? Is the signaling Like in the figure?
Asterisk / \ / \ Openser \ / \ / \ Client A Client B
regards klaus
Douglas Garstang wrote:
Klaus,
All calls are going through OpenSER from the phones. However, they don't go BACK to OpenSER. Asterisk terminates the call. Putting all calls BACK through OpenSER would be a nightmare. It would make a lot of Asterisk features such as ACD Queues, MeetMe Conferencing etc very hard to manage. I'm not even sure if they would work.
Doug.
-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, December 15, 2005 8:23 AM To: Douglas Garstang Cc: users@openser.org Subject: Re: [Users] Transaction already in Process
I can't explain it, but I do not like the idea replicating with failure routes ...
IMO it would be better to modify t_replicate to allow to replicate to moultiple instances.
Would i be possible to route all calls via openser? Then you do not need the location info in the Asterisks.
regards klaus
Douglas Garstang wrote:
Klaus,
Asterisk can't use a database for location/contact information. It also has no native means to transfer registrations between itself and another Asterisk system. It can't even perform a user defined action when a phone registers... doesn't leave us with many options. Right now, using OpenSER to replicate (forward,t_relay,t_replicate whatever) seems to be working ok. Do you have any reason to believe it wouldn't scale up well?
Doug.
-----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Thursday, December 15, 2005 3:23 AM To: Douglas Garstang Cc: users@openser.org Subject: Re: [Users] Transaction already in Process
Hi Douglas!
I still think it is a bad idea to replicate REGISTER to Asterisk 4 times. Where does Asterisk store the location table? In a database? Why not replicate the location data on DB level?
regards klaus
Douglas Garstang wrote:
Arrgh!
Now I'm getting "t_newtran: transaction already in process" messages whenever I try to call t_relay() or t_replicate twice, even when the first attempt has FAILED. In the case of t_relay() I have new addresses in the destination set and I still get this error. Why? When you attempt to deliver, and it fails, how can to attempt again without getting those messages? What fundamental piece am I missing?
How could I do this? Forget the fancy stuff. I don't care about checking for failure anymore.
t_replicate("192.168.10.7","5060"); t_replicate("192.168.10.8","5060"); t_replicate("192.168.10.200","5060");
Doug.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users