17 Feb
2005
17 Feb
'05
6:43 p.m.
Hello:
I have a Cisco 7960 running v7.3 SIP image. The phone registers to SER
0.8.14 stable. Everything works fine except call transfer. Has anyone
experienced problems with call transfer? Has anyone done anything
specific in their ser config to handle call transfer?
Thanks,Steve
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:blairs@upenn.edu
17 Feb
17 Feb
6:50 p.m.
Hi Steve!
You don'T have to do anything special for call transfer. Call transfer
is end2end feature - implementied by the SIP clients. The REFER message
will be forwarded by the SIP proxy as any other message.
regards,
klaus
Steve Blair wrote:
Hello:
I have a Cisco 7960 running v7.3 SIP image. The phone registers to SER
0.8.14 stable. Everything works fine except call transfer. Has anyone
experienced problems with call transfer? Has anyone done anything
specific in their ser config to handle call transfer?
Thanks,Steve
7:36 p.m.
I have the same problem with identical phone/proxy images.
Attended transfer works as expected among phones registered to CSPS.
Transfer from CSPS registered phone to SER registered phone or the
reverse don't work. The original called phone appears to put the
call on hold rather than releasing it.
- Jeremy
On Thu, 17 Feb 2005, Klaus Darilion wrote:
Date: Thu, 17 Feb 2005 17:50:15 +0100
From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
To: Steve Blair <blairs(a)isc.upenn.edu>
Cc: "'serusers(a)lists.iptel.org'" <serusers(a)lists.iptel.org>
Subject: Re: [Serusers] Call transfer with 7960s
Hi Steve!
You don'T have to do anything special for call transfer. Call transfer is
end2end feature - implementied by the SIP clients. The REFER message will be
forwarded by the SIP proxy as any other message.
regards,
klaus
Steve Blair wrote:
Hello:
I have a Cisco 7960 running v7.3 SIP image. The phone registers to SER
0.8.14 stable. Everything works fine except call transfer. Has anyone
experienced problems with call transfer? Has anyone done anything
specific in their ser config to handle call transfer?
Thanks,Steve
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7:48 p.m.
Call tranfers problems are often due to different dialing plans in the
sip Proxy and the gateway. If the signaling is fine but no audio, then
this is another problem.
regards,
klaus
Jeremy George wrote:
I have the same problem with identical phone/proxy images.
Attended transfer works as expected among phones registered to CSPS.
Transfer from CSPS registered phone to SER registered phone or the
reverse don't work. The original called phone appears to put the
call on hold rather than releasing it.
- Jeremy
On Thu, 17 Feb 2005, Klaus Darilion wrote:
Date: Thu, 17 Feb 2005 17:50:15 +0100
From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
To: Steve Blair <blairs(a)isc.upenn.edu>
Cc: "'serusers(a)lists.iptel.org'" <serusers(a)lists.iptel.org>
Subject: Re: [Serusers] Call transfer with 7960s
Hi Steve!
You don'T have to do anything special for call transfer. Call
transfer is end2end feature - implementied by the SIP clients. The
REFER message will be forwarded by the SIP proxy as any other message.
regards,
klaus
Steve Blair wrote:
Hello:
I have a Cisco 7960 running v7.3 SIP image. The phone registers to SER
0.8.14 stable. Everything works fine except call transfer. Has anyone
experienced problems with call transfer? Has anyone done anything
specific in their ser config to handle call transfer?
Thanks,Steve
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7219
days inactive
7219
days old
3 comments
3 participants
participants (3)
-
Jeremy George -
Klaus Darilion -
Steve Blair