Aruna, Get a apps called 'ngrep' online. It is a network packet analyser. Once installed, do this : ngrep -W byline <username of sip client> port 5060 -q So if you have an account named aruna, u can do this ngrep -W byline aruna port 5060 -q You can then attempt to get the x-lite to register. Forward the packets reading to us. Regards, Sam -----Original Message----- From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] Sent: Friday, June 02, 2006 4:14 PM To: Sam Lee Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org Subject: Re: Ser.cfg Dear Lee, I found the SIP Gateway entry. But still there UA is not registering the server. Follwing is the ser.cfg setting. Is there any way to check registration from the commond line in the Linx box ( my ser and mysql are running in Fedor 5 box) Aruna # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("ruh.ac.lk", "subscriber")) { www_challenge("ruh.ac.lk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Sam Lee writes: ---------------------------------------------------------- S. A. S. Lorensuhewa Head, Department of Computer Science University of Ruhuna, Matara, Sri Lanka Telephone: 0094 (0)41 2227019 Fax: 0094 (0)41 2222683 Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk