28 Sep
2011
28 Sep
'11
7 p.m.
I've installed 2 Freeswitch on different servers and would like to have
Kamailio load balance between them.
I've installed Kamailio following:
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
I've created dispatcher.list and added:
loadmodule "dispatcher.so"
modparam("dispatcher", "list_file",
"../etc/dispatcher.list")
in the kamailio.cfg.
But looking at:
http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html
I'm having difficulties to placing:
ds_select_dst("1", "0");
in the kamailio.cfg that was created originally.
Can anyone help me?
28 Sep
28 Sep
7:09 p.m.
Hi,
When you've got problems with placing "ds_select_dst()" in your
config, you should do the following:
- Open an Editor of your choice
- go to the line, where you want to place it
- type: ds_select_dst("1", "0");
- save & exit
Just kidding! You should do the following with your config:
kamailio -f <path-to-your-config> -c
What error is displayed? If none, then check your syslog for errors.
Could you post your config? It is better to put a full path in the
config to the dispatcher-file... otherwise it might be dependent of,
where you are running the init.d-skript/kamailio....
I am using dispatcher in Kamailio 1.5, 3.1 and 3.2, everythings works
fine with me.
Kind regards,
Carsten
2011/9/28 Henrik Aagaard Sørensen <henrikaagaardsorensen(a)gmail.com>om>:
I've installed 2 Freeswitch on different servers
and would like to have
Kamailio load balance between them.
I've installed Kamailio following:
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
I've created dispatcher.list and added:
loadmodule "dispatcher.so"
modparam("dispatcher", "list_file",
"../etc/dispatcher.list")
in the kamailio.cfg.
But looking at:
http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html
I'm having difficulties to placing:
ds_select_dst("1", "0");
in the kamailio.cfg that was created originally.
Can anyone help me?
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH i. Gr.
Schomburgstr. 80
D-22767 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220
8:30 p.m.
Hi Carsten.
The configuration works. It's actually where (which line) in the
configuration I should put:
ds_select_dst("1", "0");
:) I'm not strong in Kamailio and just want it to load balance between
Freswitch servers. So I have a basic installation of Kamailio, without
MySQL, NAT, Auth etc.
On Wed, Sep 28, 2011 at 5:09 PM, Carsten Bock <carsten(a)ng-voice.com> wrote:
Hi,
When you've got problems with placing "ds_select_dst()" in your
config, you should do the following:
- Open an Editor of your choice
- go to the line, where you want to place it
- type: ds_select_dst("1", "0");
- save & exit
Just kidding! You should do the following with your config:
kamailio -f <path-to-your-config> -c
What error is displayed? If none, then check your syslog for errors.
Could you post your config? It is better to put a full path in the
config to the dispatcher-file... otherwise it might be dependent of,
where you are running the init.d-skript/kamailio....
I am using dispatcher in Kamailio 1.5, 3.1 and 3.2, everythings works
fine with me.
Kind regards,
Carsten
2011/9/28 Henrik Aagaard Sørensen <henrikaagaardsorensen(a)gmail.com>om>:
I've installed 2 Freeswitch on different
servers and would like to have
Kamailio load balance between them.
I've installed Kamailio following:
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
I've created dispatcher.list and added:
loadmodule "dispatcher.so"
modparam("dispatcher", "list_file",
"../etc/dispatcher.list")
in the kamailio.cfg.
But looking at:
http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html
I'm having difficulties to placing:
ds_select_dst("1", "0");
in the kamailio.cfg that was created originally.
Can anyone help me?
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH i. Gr.
Schomburgstr. 80
D-22767 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
8:35 p.m.
Hello,
the devel version of dispatcher module README has a different config
example, maybe it helps you more:
http://kamailio.org/docs/modules/devel/modules_k/dispatcher.html#id2522847
I am considering to update it again soon to be a bit more complete and
follow the structure of the default config file shipped with kamailio.
Cheers,
Daniel
On 9/28/11 6:30 PM, Henrik Aagaard Sørensen wrote:
Hi Carsten.
The configuration works. It's actually where (which line) in the
configuration I should put:
ds_select_dst("1", "0");
:) I'm not strong in Kamailio and just want it to load balance between
Freswitch servers. So I have a basic installation of Kamailio, without
MySQL, NAT, Auth etc.
On Wed, Sep 28, 2011 at 5:09 PM, Carsten Bock <carsten(a)ng-voice.com
<mailto:carsten@ng-voice.com>> wrote:
Hi,
When you've got problems with placing "ds_select_dst()" in your
config, you should do the following:
- Open an Editor of your choice
- go to the line, where you want to place it
- type: ds_select_dst("1", "0");
- save & exit
Just kidding! You should do the following with your config:
kamailio -f <path-to-your-config> -c
What error is displayed? If none, then check your syslog for errors.
Could you post your config? It is better to put a full path in the
config to the dispatcher-file... otherwise it might be dependent of,
where you are running the init.d-skript/kamailio....
I am using dispatcher in Kamailio 1.5, 3.1 and 3.2, everythings works
fine with me.
Kind regards,
Carsten
2011/9/28 Henrik Aagaard Sørensen <henrikaagaardsorensen(a)gmail.com
<mailto:henrikaagaardsorensen@gmail.com>>:
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
I've installed 2 Freeswitch on different
servers and would like
to have
Kamailio load balance between them.
I've installed Kamailio following:
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git
I've created dispatcher.list and added:
loadmodule "dispatcher.so"
modparam("dispatcher", "list_file",
"../etc/dispatcher.list")
in the kamailio.cfg.
But looking at:
http://kamailio.org/docs/modules/3.1.x/modules_k/dispatcher.html
I'm having difficulties to placing:
ds_select_dst("1", "0");
in the kamailio.cfg that was created originally.
Can anyone help me?
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH i. Gr.
Schomburgstr. 80
D-22767 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com <mailto:carsten@ng-voice.com>
Mobile +49 179 2021244 <tel:%2B49%20179%202021244>
Office +49 40 34927219 <tel:%2B49%2040%2034927219>
Fax +49 40 34927220 <tel:%2B49%2040%2034927220>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4790
days inactive
4790
days old
3 comments
3 participants
participants (3)
-
Carsten Bock -
Daniel-Constantin Mierla -
Henrik Aagaard Sørensen