24 Jul
2006
24 Jul
'06
3:12 p.m.
Hi Norman!
I'Ve never had any problem with the default debian script (the one that
gets installed when compiling debian packages with "make deb".) on sarge.
Which debian are you using?
regards
klaus
SourceForge.net wrote:
Bugs item #1527750, was opened at 2006-07-24 13:05
Message generated for change (Tracker Item Submitted) made by Item Submitter
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: tools
Group: ver devel
Status: Open
Resolution: None
Priority: 5
Submitted By: Norman Brandinger (goestelecom)
Assigned to: Nobody/Anonymous (nobody)
Summary: openser.init
Initial Comment:
On debian, the openser.init script fails because the
directory below does not exist:
/etc/rc.d/init.d/functions
In addition, the killproc command does not exist.
I have commented the "functions" line and replaced
killproc with killall after installing apt-get install
psmisc.
Not sure if these changes are "correct".
Is it reasonable to have perhaps have a couple of init
scripts, tweaked for different operating systems ?
Regards,
Norm
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
24 Jul
24 Jul
3:49 p.m.
We are using etch. I believe that the reason we started using it was
that we needed SATA support for the boot drive.
Didn't realize that I could use "make deb" instead of just "make".
We
are in the process of moving from FreeBSD to Debian and used to just
issue gmake / gmake install. Will take a look at "make deb" to see if
that makes "all the worlds problems go away" :)
Regards,
Norm
Klaus Darilion wrote:
Hi Norman!
I'Ve never had any problem with the default debian script (the one
that gets installed when compiling debian packages with "make deb".)
on sarge.
Which debian are you using?
regards
klaus
SourceForge.net wrote:
Bugs item #1527750, was opened at 2006-07-24
13:05
Message generated for change (Tracker Item Submitted) made by Item
Submitter
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
Please note that this message will contain a full copy of the comment
thread,
including the initial issue submission, for this request,
not just the latest update.
Category: tools
Group: ver devel
Status: Open
Resolution: None
Priority: 5
Submitted By: Norman Brandinger (goestelecom)
Assigned to: Nobody/Anonymous (nobody)
Summary: openser.init
Initial Comment:
On debian, the openser.init script fails because the
directory below does not exist:
/etc/rc.d/init.d/functions
In addition, the killproc command does not exist.
I have commented the "functions" line and replaced
killproc with killall after installing apt-get install
psmisc.
Not sure if these changes are "correct".
Is it reasonable to have perhaps have a couple of init
scripts, tweaked for different operating systems ?
Regards,
Norm
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
4:05 p.m.
Hey Klaus,
Below is the result of a "make deb". We are using "postgres" instead
of
"mysql". Perhaps the mysql dependency should be looked into because the
"exclude_modules=" says to exclude mysql.
# if not set on the cmd. line or the env, exclude this modules:
exclude_modules?= jabber cpl-c mysql pa osp unixodbc \
avp_radius auth_radius
group_radius uri_radius
Regards,
Norm
sip-serverr# make deb
bison -d -b cfg cfg.y
cfg.y: conflicts: 1 shift/reduce
flex cfg.lex
ln -sf packaging/debian
dpkg-buildpackage -rfakeroot -tc
dpkg-buildpackage: source package is openser
dpkg-buildpackage: source version is 1.1.0-0
dpkg-buildpackage: source changed by Daniel-Constantin Mierla
<daniel(a)voice-system.ro>
dpkg-buildpackage: host architecture amd64
dpkg-buildpackage: source version without epoch 1.1.0-0
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 4) dpatch
libmysqlclient15-dev | libmysqlclient14-dev | libmysqlclient-dev
libexpat1-dev libxml2-dev libradiusclient-ng-dev | libradius-ng-dev
unixodbc-dev
dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting.
dpkg-buildpackage: (Use -d flag to override.)
make: *** [deb] Error 3
Norman Brandinger wrote:
We are using etch. I believe that the reason we
started using it was
that we needed SATA support for the boot drive.
Didn't realize that I could use "make deb" instead of just
"make". We
are in the process of moving from FreeBSD to Debian and used to just
issue gmake / gmake install. Will take a look at "make deb" to see if
that makes "all the worlds problems go away" :)
Regards,
Norm
Klaus Darilion wrote:
Hi Norman!
I'Ve never had any problem with the default debian script (the one
that gets installed when compiling debian packages with "make deb".)
on sarge.
Which debian are you using?
regards
klaus
SourceForge.net wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Bugs item #1527750, was opened at 2006-07-24
13:05
Message generated for change (Tracker Item Submitted) made by Item
Submitter
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
Please note that this message will contain a full copy of the
comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: tools
Group: ver devel
Status: Open
Resolution: None
Priority: 5
Submitted By: Norman Brandinger (goestelecom)
Assigned to: Nobody/Anonymous (nobody)
Summary: openser.init
Initial Comment:
On debian, the openser.init script fails because the
directory below does not exist:
/etc/rc.d/init.d/functions
In addition, the killproc command does not exist.
I have commented the "functions" line and replaced
killproc with killall after installing apt-get install
psmisc.
Not sure if these changes are "correct".
Is it reasonable to have perhaps have a couple of init
scripts, tweaked for different operating systems ?
Regards,
Norm
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
5:04 p.m.
AFAIK the package build system always builds all packages, thus the
requirement for the mysql development files. IMO it causes no harm to
have libmysqlcient and ..-dev on the system.
You can use the etch packages from openser.org or install all the needed
library on one server which is used for building the packages.
regards
klasu
Norman Brandinger wrote:
Hey Klaus,
Below is the result of a "make deb". We are using "postgres" instead
of
"mysql". Perhaps the mysql dependency should be looked into because the
"exclude_modules=" says to exclude mysql.
# if not set on the cmd. line or the env, exclude this modules:
exclude_modules?= jabber cpl-c mysql pa osp unixodbc \
avp_radius auth_radius
group_radius uri_radius
Regards,
Norm
sip-serverr# make deb
bison -d -b cfg cfg.y
cfg.y: conflicts: 1 shift/reduce
flex cfg.lex
ln -sf packaging/debian
dpkg-buildpackage -rfakeroot -tc
dpkg-buildpackage: source package is openser
dpkg-buildpackage: source version is 1.1.0-0
dpkg-buildpackage: source changed by Daniel-Constantin Mierla
<daniel(a)voice-system.ro>
dpkg-buildpackage: host architecture amd64
dpkg-buildpackage: source version without epoch 1.1.0-0
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 4) dpatch
libmysqlclient15-dev | libmysqlclient14-dev | libmysqlclient-dev
libexpat1-dev libxml2-dev libradiusclient-ng-dev | libradius-ng-dev
unixodbc-dev
dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting.
dpkg-buildpackage: (Use -d flag to override.)
make: *** [deb] Error 3
Norman Brandinger wrote:
We are using etch. I believe that the reason we
started using it was
that we needed SATA support for the boot drive.
Didn't realize that I could use "make deb" instead of just
"make". We
are in the process of moving from FreeBSD to Debian and used to just
issue gmake / gmake install. Will take a look at "make deb" to see if
that makes "all the worlds problems go away" :)
Regards,
Norm
Klaus Darilion wrote:
Hi Norman!
I'Ve never had any problem with the default debian script (the one
that gets installed when compiling debian packages with "make deb".)
on sarge.
Which debian are you using?
regards
klaus
SourceForge.net wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Bugs item #1527750, was opened at 2006-07-24
13:05
Message generated for change (Tracker Item Submitted) made by Item
Submitter
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
Please note that this message will contain a full copy of the
comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: tools
Group: ver devel
Status: Open
Resolution: None
Priority: 5
Submitted By: Norman Brandinger (goestelecom)
Assigned to: Nobody/Anonymous (nobody)
Summary: openser.init
Initial Comment:
On debian, the openser.init script fails because the
directory below does not exist:
/etc/rc.d/init.d/functions
In addition, the killproc command does not exist.
I have commented the "functions" line and replaced
killproc with killall after installing apt-get install
psmisc.
Not sure if these changes are "correct".
Is it reasonable to have perhaps have a couple of init
scripts, tweaked for different operating systems ?
Regards,
Norm
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
_______________________________________________
Devel mailing list
Devel(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
25 Jul
25 Jul
12:29 p.m.
Hello,
On 07/24/06 18:04, Klaus Darilion wrote:
AFAIK the package build system always builds all
packages,
yes, it builds all packages, even unixodbc and radius modules. If you
want to build packages locally you either install all required libraries
or edit 'control' and 'rules' files from packaging/debian to fit your
needs.
Cheers,
Daniel
thus the requirement for the mysql development files.
IMO it causes no
harm to have libmysqlcient and ..-dev on the system.
You can use the etch packages from openser.org or install all the
needed library on one server which is used for building the packages.
regards
klasu
Norman Brandinger wrote:
Hey Klaus,
Below is the result of a "make deb". We are using "postgres" instead
of "mysql". Perhaps the mysql dependency should be looked into
because the "exclude_modules=" says to exclude mysql.
# if not set on the cmd. line or the env, exclude this modules:
exclude_modules?= jabber cpl-c mysql pa osp unixodbc \
avp_radius auth_radius
group_radius uri_radius
Regards,
Norm
sip-serverr# make deb
bison -d -b cfg cfg.y
cfg.y: conflicts: 1 shift/reduce
flex cfg.lex
ln -sf packaging/debian
dpkg-buildpackage -rfakeroot -tc
dpkg-buildpackage: source package is openser
dpkg-buildpackage: source version is 1.1.0-0
dpkg-buildpackage: source changed by Daniel-Constantin Mierla
<daniel(a)voice-system.ro>
dpkg-buildpackage: host architecture amd64
dpkg-buildpackage: source version without epoch 1.1.0-0
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 4)
dpatch libmysqlclient15-dev | libmysqlclient14-dev |
libmysqlclient-dev libexpat1-dev libxml2-dev libradiusclient-ng-dev |
libradius-ng-dev unixodbc-dev
dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting.
dpkg-buildpackage: (Use -d flag to override.)
make: *** [deb] Error 3
Norman Brandinger wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
We are using etch. I believe that the reason we
started using it
was that we needed SATA support for the boot drive.
Didn't realize that I could use "make deb" instead of just
"make".
We are in the process of moving from FreeBSD to Debian and used to
just issue gmake / gmake install. Will take a look at "make deb" to
see if that makes "all the worlds problems go away" :)
Regards,
Norm
Klaus Darilion wrote:
Hi Norman!
I'Ve never had any problem with the default debian script (the one
that gets installed when compiling debian packages with "make
deb".) on sarge.
Which debian are you using?
regards
klaus
SourceForge.net wrote:
> Bugs item #1527750, was opened at 2006-07-24 13:05
> Message generated for change (Tracker Item Submitted) made by Item
> Submitter
> You can respond by visiting:
>
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
>
>
> Please note that this message will contain a full copy of the
> comment thread,
> including the initial issue submission, for this request,
> not just the latest update.
> Category: tools
> Group: ver devel
> Status: Open
> Resolution: None
> Priority: 5
> Submitted By: Norman Brandinger (goestelecom)
> Assigned to: Nobody/Anonymous (nobody)
> Summary: openser.init
>
> Initial Comment:
> On debian, the openser.init script fails because the
> directory below does not exist:
>
> /etc/rc.d/init.d/functions
>
> In addition, the killproc command does not exist.
>
> I have commented the "functions" line and replaced
> killproc with killall after installing apt-get install
> psmisc.
>
> Not sure if these changes are "correct".
>
> Is it reasonable to have perhaps have a couple of init
> scripts, tweaked for different operating systems ?
>
> Regards,
> Norm
>
> ----------------------------------------------------------------------
>
>
> You can respond by visiting:
>
https://sourceforge.net/tracker/?func=detail&atid=743020&aid=152775…
>
>
> _______________________________________________
> Devel mailing list
> Devel(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/devel
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6702
days inactive
6703
days old
4 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Klaus Darilion -
Norman Brandinger