Hello Tim,
On 04/23/07 18:36, Tim Madorma wrote:
Hey Daniel,
When I looked at the ChangeLog, it does not seem to indicate that the fix is there.
http://openser.svn.sourceforge.net/svnroot/openser/branches/1.2/ChangeLog
ChangeLog is usually left behind and updated just before the release.
Should I be concerned about this?
No
Should I just use the daily snapshot instead? How stable is the daily snapshot?
Daily snapshot is more or less what SVN 1.2 branch shows at the moment when the snapshot is done. So using SVN will guarantee the access to latest stable code. Snapshots and SVN of branch 1.2 should be the most stable in the 1.2.x release. There are no other commits to branch 1.2 but bug fixes.
We publish daily snapshots just as backup when SVN is not available, otherwise SVN is advisable to use if you can use subversion.
Cheers, Daniel
Tim
On 4/23/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
Hello,
daily snapshots are enabled now for 1.2.x as well:
http://www.openser.org/downloads/snapshots/openser-1.2.x/
Cheers, Daniel
On 04/23/07 17:47, Ovidiu Sas wrote:
Hi Tim,
Check the download page from openser website: http://www.openser.org/mos/view/Download/:
The command that you need to run: svn co http://openser.svn.sourceforge.net/svnroot/openser/branches/1.2 openser
Make sure that you have svn installed.
Regards, Ovidiu Sas
On 4/23/07, Tim Madorma tmadorma@gmail.com wrote:
Hi Daniel,
I have run into a leak in 1.2 and I assume it is the same one that Ovidiu ran into. I see in your response that it was "backported to 1.2", but I'm not sure how to get the fix. When I look at the SVN repository at: http://www.openser.org/pub/openser/latest-1.2.x/, the date is earlier than the date of your email exchange so I don't think the fix has
been
added there. Can you please let me know how I can get it?
thanks, Tim
On 3/23/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
Hello Ovidiu,
On 03/23/07 17:04, Ovidiu Sas wrote:
Hi Daniel,
Can we backport this one to 1.2?
already done, two minutes after the commit in trunk.
Cheers, Daniel
Regards, Ovidiu Sas
On 3/22/07, Daniel-Constantin Mierla daniel@voice-system.ro
wrote:
> Hello, > > the supposed fragmentation turned out to be a mem leak in pkg.
Please
> take the latest SVN version and try again to see if you got same > results. > > Thanks, > Daniel > > On 03/19/07 18:52, Christian Schlatter wrote: > > ... > >>> The memory statistics indeed show a high number of memory
fragments:
> >>> > >>> before 'out of memory': > >>> > >>> shmem:total_size = 536870912 > >>> shmem:used_size = 59607040 > >>> shmem:real_used_size = 60106488 > >>> shmem:max_used_size = 68261536 > >>> shmem:free_size = 476764424 > >>> shmem:fragments = 9897 > >>> > >>> after 'out of memory' (about 8000 calls per process): > >>> > >>> shmem:total_size = 536870912 > >>> shmem:used_size = 4171160 > >>> shmem:real_used_size = 4670744 > >>> shmem:max_used_size = 68261536 > >>> shmem:free_size = 532200168 > >>> shmem:fragments = 57902 > >>> > >>>> > >>>> You can try to compile openser with -DQM_JOIN_FREE (add it
in DEFS
> >>>> variable of Makefile.defs) and test again. Free fragments
should be
> >>>> merged and fragmentation should not occur -- processing
will be
> >>>> slower. We will try for next release to provide a better
solution
> >>>> for that. > >>> > >>> Compiling openser with -DQM_JOIN_FREE did not help. I'm not
sure how
> >>> big of a problem this fragmentation issue is. > >> What is the number of fragments with QM_JOIN_FREE after
flooding?
> > > > The numbers included above are with QM_JOIN_FREE enabled. > > > >>> Do you think it would make sense to restart our production
openser
> >>> instances from time to time just to make sure they're not
running
> >>> into this memory fragmentation limits? > >> The issue will occur only when the call rate reaches the
limits of
> >> the proxy's memory. Otherwise the chunks are reused.
Transactions and
> >> avps are rounded up to be sure there will be minimized the
number of
> >> different sizes for memory chunks. It wasn't reported too
often,
> >> maybe that's why no big attention was paid to it. This memory
system
> >> is in place since the beginning of ser. Alternative is to use
sysv
> >> shared memory, but is much slower, along with libc private
memory
> >> manager. > > > > I've done some more testing and the same out-of-memory stuff
happens
> > when I run sipp with 10 calls per second only. I tested with > > 'children=1' and I only could get through about 8200 calls
(again
> > those 8000 calls / process). And this is with QM_JOIN_FREE
enabled.
> > > > Memory statistics: > > > > before: > > shmem:total_size = 536870912 > > shmem:used_size = 2311976 > > shmem:real_used_size = 2335720 > > shmem:max_used_size = 2465816 > > shmem:free_size = 534535192 > > shmem:fragments = 183 > > > > after: > > shmem:total_size = 536870912 > > shmem:used_size = 1853472 > > shmem:real_used_size = 1877224 > > shmem:max_used_size = 2465816 > > shmem:free_size = 534993688 > > shmem:fragments = 547 > > > > So I'm not sure if this is really a fragmentation issue. 10
cps surely
> > doesn't reach the proxy's memory. > > > > Thoughts? > > > > Christian > > > > > > > >> Cheers, > >> Daniel > >> > >>> > >>> thanks, > >>> Christian > >>> > >>>> > >>>> Cheers, > >>>> Daniel > >>>> > >>>> On 03/18/07 01:21, Christian Schlatter wrote: > >>>>> Christian Schlatter wrote: > >>>>> ... > >>>>>> > >>>>>> I always had 768MB shared memory configured though, so I
still
> >>>>>> can't explain the memory allocation errors I got. Some
more test
> >>>>>> runs revealed that I only get these errors when using
a more
> >>>>>> production oriented config that loads more modules than
the one
> >>>>>> posted in my earlier email. I now try to figure out what
exactly
> >>>>>> causes these memory allocation errors that happen
reproducibly
> >>>>>> after about 220s at 400 cps. > >>>>> > >>>>> I think I found the cause for the memory allocation
errors. As
> >>>>> soon as I include an AVP write operation in the routing
script, I
> >>>>> get 'out of memory' messages after a certain number of
calls
> >>>>> generated with sipp. > >>>>> > >>>>> The routing script to reproduce this behavior looks like
(full
> >>>>> config available at > >>>>> http://www.unc.edu/~cschlatt/openser/openser.cfg): > >>>>> > >>>>> route{ > >>>>> $avp(s:ct) = $ct; # commenting this line solves > >>>>> # the memory problem > >>>>> > >>>>> if (!method=="REGISTER") record_route(); > >>>>> if (loose_route()) route(1); > >>>>> > >>>>> if (uri==myself) rewritehost("xx.xx.xx.xx"); > >>>>> route(1); > >>>>> } > >>>>> > >>>>> route[1] { > >>>>> if (!t_relay()) sl_reply_error(); > >>>>> exit; > >>>>> } > >>>>> > >>>>> An example log file showing the 'out of memory'
messages is
> >>>>> available at
http://www.unc.edu/~cschlatt/openser/openser.log .
> >>>>> > >>>>> Some observations: > >>>>> > >>>>> - The 'out of memory' messages always appear after about
8000 test
> >>>>> calls per worker process. One call consists of two SIP > >>>>> transactions and six end-to-end SIP messages. An openser
with 8
> >>>>> children handles about 64'000 calls, whereas 4 children
only
> >>>>> handle about 32'000 calls. The sipp call rate doesn't
matter, only
> >>>>> number of calls. > >>>>> > >>>>> - The 8000 calls per worker process are independent
from the
> >>>>> amount of shared memory available. Running openser with -m
128 or
> >>>>> -m 768 does not make a difference. > >>>>> > >>>>> - The more AVP writes are done in the script, the less
calls go
> >>>>> through. It looks like each AVP write is leaking memory
(unnoticed
> >>>>> by the memory statistics). > >>>>> > >>>>> - The fifo memory statistics do not reflect the 'out of
memory'
> >>>>> syslog messages. Even if openser does not route a
single SIP
> >>>>> message because of memory issues, the statistics still
show a lot
> >>>>> of 'free' memory. > >>>>> > >>>>> > >>>>> All tests were done with openser SVN 1.2 branch on Ubuntu
dapper
> >>>>> x86. I think the same is true for 1.1 version but I
haven't tested
> >>>>> that yet. > >>>>> > >>>>> > >>>>> Christian > >>>>> > >>> > >>> > > > > > > _______________________________________________ > > Users mailing list > > Users@openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users