New subject: [Serusers] Need Routing Help

27 Jun 2003

Jan,

My SER SIP server works fine with the default config script. As soon as I
add some simple static routing such as:

if (uri=~"^sip:9[0-9]*@rtcsol.local) {
        forward( 159.63.73.165, 5060 );

to the script and restart ser, my log looks like the attached. There is a
ser process running but it is not normal and no network SIP ports ie 5060
are opened.

The command line returns:

[root@FFDCTSERSIP ser]# /etc/rc.d/init.d/ser stop
Stopping ser:                                              [  OK  ]
[root@FFDCTSERSIP ser]#
[root@FFDCTSERSIP ser]# /etc/rc.d/init.d/ser start
Starting ser: Terminated
[root@FFDCTSERSIP ser]#
[root@FFDCTSERSIP ser]# /etc/rc.d/init.d/ser status
ser (pid 7309) is running...
[root@FFDCTSERSIP ser]#

I'm running the 0.8.11pre29 for test bed only on a Red Hat 9 system. What
could I be doing wrong?

Paul

-----Original Message-----
From: Jan Janak [mailto:jan@iptel.org]
Sent: Thursday, June 26, 2003 2:02 PM
To: Wasik, Paul
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Need Routing Help

Edit your configuration file and set log_stderror to yes. By default the
server uses syslog to do the output so you will find it in
/var/log/messages or /var/log/daemon (depending on your distribution).
If you set the variable then ser will output all messages to the
standard output.

  Jan.

On 26-06 14:01, Wasik, Paul wrote:
...
  Jan,

 I don't see any error output on the command line. Is there a log file
 somewhere? All I see is "Terminated" when attempting to start SER.

 Paul

 -----Original Message-----
 From: Jan Janak [mailto:jan@iptel.org]
 Sent: Thursday, June 26, 2003 1:58 PM
 To: Wasik, Paul
 Cc: serusers(a)lists.iptel.org
 Subject: Re: [Serusers] Need Routing Help

 Hello,

 and what is the problem ? If your ser doesn't start anymore then your
 configuration file contains some mistake. In that case the output of ser
 tells you on what line the mistake is, for example:

 0(6704) parse error (75,36-37): syntax error
 0(6704) parse error (75,36-37): invalid  route  statement
 0(6704) parse error (75,38-39): 
 ERROR: bad config file (3 errors)

 means that there is an error on line 75 of the configuration file.

   Jan.

 On 26-06 13:53, Wasik, Paul wrote:
  Hi all,

 I've got SER running on a Red Hat 9 platform. I've got MySQL and serweb
 working and using the default ser.cfg file I can register UAs and make  local
  calls within the proxy. What I have not been able
to do is get routing /
 dial plan stuff to work via a Cisco SIP gateway. I cannot get SER to run
 once I add any routing information to the ser.cfg script. I tried  following
 > the examples like the following from the "How to" guide:
 > 
 > # attempt handoff to PSTN
 > if (uri=~"^sip:9[0-9]*@mydomain.com") { ## This assumes that the caller
is
...

 > log("Forwarding to PSTN\n"); ## registered in our realm
 > t_relay_to( "192.168.0.2", "5060"); ## Our Cisco router
 > break;
 > };
 > Anyone have any ser.cfg script files that work succesfully for simple dial
...
  > plan / routing to a SIP gatewat they could share?
I'm having a hard time
 > with the routing.
 > Thanks,
 > Paul
 > 
 > 
 > _______________________________________________
 > Serusers mailing list
 > serusers(a)lists.iptel.org
 > http://lists.iptel.org/mailman/listinfo/serusers 

RE: [Serusers] Need Routing Help