27 Oct
2009
27 Oct
'09
4:01 p.m.
I'm having some issues getting kam to log correctly to syslog after it
daemonizes. I get all the initialization entries in the proper logfile
but nothing after that - I have xlog statements throughout the config
which only show up in syslog if fork=no. I've tested my syslog config
with the system logger which works correctly executed as the kamailio
user. If I run syslog in debug I don't see it receiving anything from
kam after initialization. Any ideas?
log_stderror=no
log_facility=LOG_LOCAL1
debug=7
fork=yes
children=4
/etc/syslog.conf (with tabs)
local1.debug
/var/log/globeop/kamailio.log
This is the correct format of syslog in solaris. It only uses wildcard
(*) in facility not levels. Specifying debug will include everything at
higher levels. From the man page:
For a given facility and level, syslogd matches all messages
for that
level and all higher levels. For example, an entry that
specifies a
level of crit also logs messages at the alert and emerg levels.
This config is working correctly on sol 10 with openser 1.3.
ykt1sipprd2# tail -f /var/log/globeop/kamailio.log
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 951507 local1.debug]
DBG:core:grep_aliases: comparing host [2:loghost:5060] with us
[1:loghost:5060]
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 951507 local1.debug]
DBG:core:grep_aliases: comparing host [2:loghost:5060] with us
[1:ykt1sipprd2:5060]
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 793175 local1.debug]
DBG:core:grep_aliases: no match for: [2:loghost:5060]
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 634971 local1.debug]
DBG:core:socket2str: <tcp:172.20.151.148:5060>
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 797031 local1.debug]
DBG:core:fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 596959 local1.debug]
DBG:core:fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16560
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 362601 local1.debug]
DBG:core:fm_malloc_init: params (fc400000, 33554432), start=fc400000
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 551434 local1.debug]
DBG:core:shm_mem_init_mallocs: success
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 123545 local1.info]
INFO:core:init_tcp: using /dev/poll as the TCP io watch method (auto
detected)
Oct 27 09:50:46 ykt1sipprd2 kamailio[3815]: [ID 721503 local1.warning]
WARNING:core:daemonize: pid file contains old pid, replacing pid
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may contain
confidential and/or privileged information intended for the addressee(s) only. If you have
received this email in error, please contact the sender and immediately delete this email
in its entirety and any attachments thereto.
27 Oct
27 Oct
10:38 p.m.
Hello,
so it is working with 1.3 but not with 1.5, right? IIRC, some changes
were added when introducing async logging and running under daemontools.
The log you pasted at the end is what you get not in syslog file?
Cheers,
Daniel
On 27.10.2009 15:01 Uhr, Robert McGilvray wrote:
I’m having some issues getting kam to log correctly to syslog after it
daemonizes. I get all the initialization entries in the proper logfile
but nothing after that – I have xlog statements throughout the config
which only show up in syslog if fork=no. I’ve tested my syslog config
with the system logger which works correctly executed as the kamailio
user. If I run syslog in debug I don’t see it receiving anything from
kam after initialization. Any ideas?
log_stderror=no
log_facility=LOG_LOCAL1
debug=7
fork=yes
children=4
/etc/syslog.conf (with tabs)
local1.debug
/var/log/globeop/kamailio.log
This is the correct format of syslog in solaris. It only uses wildcard
(*) in facility not levels. Specifying debug will include everything
at higher levels. From the man page:
For a given facility and level, syslogd matches all messages
for that
level and all higher levels. For example, an entry that
specifies a
level of crit also logs messages at the alert and emerg levels.
This config is working correctly on sol 10 with openser 1.3.
ykt1sipprd2# tail -f /var/log/globeop/kamailio.log
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 951507 local1.debug]
DBG:core:grep_aliases: comparing host [2:loghost:5060] with us
[1:loghost:5060]
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 951507 local1.debug]
DBG:core:grep_aliases: comparing host [2:loghost:5060] with us
[1:ykt1sipprd2:5060]
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 793175 local1.debug]
DBG:core:grep_aliases: no match for: [2:loghost:5060]
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 634971 local1.debug]
DBG:core:socket2str: <tcp:172.20.151.148:5060>
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 797031 local1.debug]
DBG:core:fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 596959 local1.debug]
DBG:core:fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16560
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 362601 local1.debug]
DBG:core:fm_malloc_init: params (fc400000, 33554432), start=fc400000
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 551434 local1.debug]
DBG:core:shm_mem_init_mallocs: success
Oct 27 09:50:46 ykt1sipprd2 kamailio[3813]: [ID 123545 local1.info]
INFO:core:init_tcp: using /dev/poll as the TCP io watch method (auto
detected)
Oct 27 09:50:46 ykt1sipprd2 kamailio[3815]: [ID 721503 local1.warning]
WARNING:core:daemonize: pid file contains old pid, replacing pid
------------------------------------------------------------------------
This email with all information contained herein or attached hereto
may contain confidential and/or privileged information intended for
the addressee(s) only. If you have received this email in error,
please contact the sender and immediately delete this email in its
entirety and any attachments thereto.
------------------------------------------------------------------------
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
* Kamailio SIP Masterclass, Nov 9-13, 2009, Berlin
* http://www.asipto.com/index.php/sip-router-masterclass/
28 Oct
28 Oct
2:05 a.m.
-----Original Message-----
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Tuesday, October 27, 2009 4:38 PM
To: Robert McGilvray
Cc: users(a)lists.kamailio.org
Subject: Re: [Kamailio-Users] kam 1.5 syslog on solaris 10
Hello,
so it is working with 1.3 but not with 1.5, right? IIRC, some changes
were added when introducing async logging and running under daemontools.
The log you pasted at the end is what you get not in syslog file?
Cheers,
Daniel
--
Right - works with 1.3 but not 1.5.2 The log at the bottom actually does
show up in syslog but that's the last I ever see if I set fork=yes. If I
set fork=no (with log_stderror=no) then everything shows up as expected.
On 1.3 and with fork=no on 1.5 I see a bunch of open file entries for
xlog pointing at my log device that aren't there when it daemonizes.
Example:
openser 23192 openser txt VREG 85,3 55156 104971
/usr/local/openser-1.3.2/lib64/openser/modules/xlog.so
openser 23192 openser 3w VCHR 21,3289 11010052
/devices/pseudo/log@0:conslog->LOG
I was looking at the commits earlier and noticed the changes you're
talking about. There was some work done moving the openlog() stuff from
daemonize.c to main.c - looks like some kind of solaris bug was
introduced in one of them.
Bob
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may contain
confidential and/or privileged information intended for the addressee(s) only. If you have
received this email in error, please contact the sender and immediately delete this email
in its entirety and any attachments thereto.
10:51 a.m.
On Mittwoch, 28. Oktober 2009, Robert McGilvray wrote:
so it is working with 1.3 but not with 1.5, right?
IIRC, some changes
were added when introducing async logging and running under daemontools.
The log you pasted at the end is what you get not in syslog file?
Cheers,
Daniel
--
Right - works with 1.3 but not 1.5.2 The log at the bottom actually does
show up in syslog but that's the last I ever see if I set fork=yes. If I
set fork=no (with log_stderror=no) then everything shows up as expected.
On 1.3 and with fork=no on 1.5 I see a bunch of open file entries for
xlog pointing at my log device that aren't there when it daemonizes.
Example:
openser 23192 openser txt VREG 85,3 55156 104971
/usr/local/openser-1.3.2/lib64/openser/modules/xlog.so
openser 23192 openser 3w VCHR 21,3289 11010052
/devices/pseudo/log@0:conslog->LOG
I was looking at the commits earlier and noticed the changes you're
talking about. There was some work done moving the openlog() stuff from
daemonize.c to main.c - looks like some kind of solaris bug was
introduced in one of them.
Hello Robert,
with regards to the async logging, its not enabled by default, so i guess the
changes you talking about are guilty.
Regards,
Henning
11:40 a.m.
On 28.10.2009 9:51 Uhr, Henning Westerholt wrote:
On Mittwoch, 28. Oktober 2009, Robert McGilvray
wrote:
this is the commit mentioned:
http://openser.svn.sourceforge.net/viewvc/openser?view=rev&revision=5142
and seems to be the last one to these files. Robert, can you get and
test revision before this commit (probably works to get just the three
files and copy them in your source tree)? Would help to identify if this
is the problem since I have no solaris 10.
Thanks,
Daniel
so it is working with 1.3 but not with 1.5,
right? IIRC, some changes
were added when introducing async logging and running under daemontools.
The log you pasted at the end is what you get not in syslog file?
Cheers,
Daniel
--
Right - works with 1.3 but not 1.5.2 The log at the bottom actually does
show up in syslog but that's the last I ever see if I set fork=yes. If I
set fork=no (with log_stderror=no) then everything shows up as expected.
On 1.3 and with fork=no on 1.5 I see a bunch of open file entries for
xlog pointing at my log device that aren't there when it daemonizes.
Example:
openser 23192 openser txt VREG 85,3 55156 104971
/usr/local/openser-1.3.2/lib64/openser/modules/xlog.so
openser 23192 openser 3w VCHR 21,3289 11010052
/devices/pseudo/log@0:conslog->LOG
I was looking at the commits earlier and noticed the changes you're
talking about. There was some work done moving the openlog() stuff from
daemonize.c to main.c - looks like some kind of solaris bug was
introduced in one of them.
Hello Robert,
with regards to the async logging, its not enabled by default, so i
guess the changes you talking about are guilty.
29 Oct
29 Oct
4:33 p.m.
-----Original Message-----
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Wednesday, October 28, 2009 5:41 AM
To: Robert McGilvray
Cc: Henning Westerholt; users(a)lists.kamailio.org
Subject: Re: [Kamailio-Users] kam 1.5 syslog on solaris 10
On 28.10.2009 9:51 Uhr, Henning Westerholt wrote:
this is the commit mentioned:
http://openser.svn.sourceforge.net/viewvc/openser?view=rev&revision=5142
and seems to be the last one to these files. Robert, can you get and
test revision before this commit (probably works to get just the three
files and copy them in your source tree)? Would help to identify if this
is the problem since I have no solaris 10.
Thanks,
Daniel
--
I wasn't able to compile by just switching out the three files, there
were unresolved symbols related to pv_free_extra_list();. I finally got
around the firewalls here to checkout revision 5141 but it won't
compile. The file it bails on is exactly the same as in 1.5.2 release so
I'm not sure why.
Compiling db/db_ut.c
/usr/sfw/bin/gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc
-mtune=ultrasparc -DNAME='"kamailio"'
-DVERSION='"1.5.0-dev9-tls"'
-DARCH='"sparc64"' -DOS='"solaris"'
-DCOMPILER='"/usr/sfw/bin/gcc
3.4.3"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_no
-DCFG_DIR='"/usr/local/kamailio-1.5.2/etc/kamailio/"' -DPKG_MALLOC
-DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
-DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC
-DSVNREVISION='"2:5141"' -DUSE_TLS -DFAST_LOCK -DADAPTIVE_WAIT
-DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H
-DHAVE_SCHED_YIELD -DHAVE_ALLOCA_H -DUSE_SIGACTION
-D_POSIX_PTHREAD_SEMANTICS -DHAVE_DEVPOLL -DHAVE_SELECT -I/ssl/include
-I/include -I/usr/include/openssl -c db/db_ut.c -o db/db_ut.o
In file included from db/db_ut.c:41:
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
db/db_ut.c: In function `db_str2longlong':
db/db_ut.c:75: warning: implicit declaration of function `strtoll'
db/db_ut.c: In function `db_int2str':
db/db_ut.c:114: warning: implicit declaration of function `snprintf'
gmake: *** [db/db_ut.o] Error 1
Unrelated question - I've tried changing the tuning options specified in
Makefile.defs to use the proper cpu arch and kept with -m32 since it has
to link against 32 bit libaries but even with that it builds the object
files as 64 bit. It then fails when linking kamailio. What's the proper
way to optimize the binary but keep all aspects of it 32? I tried
-mcpu=ultrasparc3 -m32 -threads -Wa,-xarch=v9b
It's an UltraSPARC-IIIi chip.
ykt1sipprd2# ls -1 *.o | xargs -n1 file
action.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
blacklists.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
cfg.tab.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
cmpapi.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
core_stats.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
crc.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
daemonize.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
data_lump.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
<snip>
Thanks!
Bob
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may contain
confidential and/or privileged information intended for the addressee(s) only. If you have
received this email in error, please contact the sender and immediately delete this email
in its entirety and any attachments thereto.
On Mittwoch, 28. Oktober 2009, Robert McGilvray
wrote:
> so it is working with 1.3 but not with 1.5, right? IIRC, some
changes
> were added when introducing async logging and
running under
daemontools.
>
> The log you pasted at the end is what you get not in syslog file?
>
> Cheers,
> Daniel
>
> --
>
>
> Right - works with 1.3 but not 1.5.2 The log at the bottom actually
does
> show up in syslog but that's the last I ever
see if I set fork=yes.
If I
> set fork=no (with log_stderror=no) then
everything shows up as
expected.
>
>
> On 1.3 and with fork=no on 1.5 I see a bunch of open file entries
for
> xlog pointing at my log device that aren't
there when it daemonizes.
> Example:
>
> openser 23192 openser txt VREG 85,3 55156 104971
> /usr/local/openser-1.3.2/lib64/openser/modules/xlog.so
> openser 23192 openser 3w VCHR 21,3289 11010052
> /devices/pseudo/log@0:conslog->LOG
>
> I was looking at the commits earlier and noticed the changes you're
> talking about. There was some work done moving the openlog() stuff
from
daemonize.c to
main.c - looks like some kind of solaris bug was
introduced in one of them.
Hello Robert,
with regards to the async logging, its not enabled by default, so i
guess the changes you talking about are guilty.
6:46 p.m.
On Donnerstag, 29. Oktober 2009, Robert McGilvray wrote:
[..]
I wasn't able to compile by just switching out the three files, there
were unresolved symbols related to pv_free_extra_list();. I finally got
around the firewalls here to checkout revision 5141 but it won't
compile. The file it bails on is exactly the same as in 1.5.2 release so
I'm not sure why.
Hi Robert,
i've attached a patch that removes the changes from this revision, it applies
also to the latest kamailio 1.5 branch. So if this version compiles for you,
then you could use this patch to check if the change in question is guilty.
Regards,
Henning
Compiling db/db_ut.c
/usr/sfw/bin/gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc
-mtune=ultrasparc -DNAME='"kamailio"'
-DVERSION='"1.5.0-dev9-tls"'
-DARCH='"sparc64"' -DOS='"solaris"'
-DCOMPILER='"/usr/sfw/bin/gcc
3.4.3"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_no
-DCFG_DIR='"/usr/local/kamailio-1.5.2/etc/kamailio/"' -DPKG_MALLOC
-DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
-DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC
-DSVNREVISION='"2:5141"' -DUSE_TLS -DFAST_LOCK -DADAPTIVE_WAIT
-DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H
-DHAVE_SCHED_YIELD -DHAVE_ALLOCA_H -DUSE_SIGACTION
-D_POSIX_PTHREAD_SEMANTICS -DHAVE_DEVPOLL -DHAVE_SELECT -I/ssl/include
-I/include -I/usr/include/openssl -c db/db_ut.c -o db/db_ut.o
In file included from db/db_ut.c:41:
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
db/db_ut.c: In function `db_str2longlong':
db/db_ut.c:75: warning: implicit declaration of function `strtoll'
db/db_ut.c: In function `db_int2str':
db/db_ut.c:114: warning: implicit declaration of function `snprintf'
gmake: *** [db/db_ut.o] Error 1
Unrelated question - I've tried changing the tuning options specified in
Makefile.defs to use the proper cpu arch and kept with -m32 since it has
to link against 32 bit libaries but even with that it builds the object
files as 64 bit. It then fails when linking kamailio. What's the proper
way to optimize the binary but keep all aspects of it 32? I tried
-mcpu=ultrasparc3 -m32 -threads -Wa,-xarch=v9b
It's an UltraSPARC-IIIi chip.
ykt1sipprd2# ls -1 *.o | xargs -n1 file
action.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
blacklists.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
cfg.tab.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
cmpapi.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
core_stats.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
crc.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
daemonize.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
data_lump.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
<snip>
Thanks!
Bob
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may
contain confidential and/or privileged information intended for the
addressee(s) only. If you have received this email in error, please contact
the sender and immediately delete this email in its entirety and any
attachments thereto.
8:41 p.m.
________________________________
From: Henning Westerholt [mailto:henning.westerholt@1und1.de]
Sent: Thursday, October 29, 2009 12:47 PM
To: Robert McGilvray
Cc: Daniel-Constantin Mierla; users(a)lists.kamailio.org
Subject: Re: [Kamailio-Users] kam 1.5 syslog on solaris 10
On Donnerstag, 29. Oktober 2009, Robert McGilvray wrote:
[..]
I wasn't able to compile by just switching out the three files, there
were unresolved symbols related to pv_free_extra_list();. I finally
got
around the firewalls here to checkout revision 5141
but it won't
compile. The file it bails on is exactly the same as in 1.5.2 release
so
I'm not sure why.
Hi Robert,
i've attached a patch that removes the changes from this revision, it
applies also to the latest kamailio 1.5 branch. So if this version
compiles for you, then you could use this patch to check if the change
in question is guilty.
Regards,
Henning
--
The patch fixed it.
kamailio 19078 kam txt VREG 85,3 51192 456925
/usr/local/kamailio-1.5.3/lib64/kamailio/modules/xlog.so
kamailio 19078 kam 3w VCHR 21,234 11010052
/devices/pseudo/log@0:conslog->LOG
Bob
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may contain
confidential and/or privileged information intended for the addressee(s) only. If you have
received this email in error, please contact the sender and immediately delete this email
in its entirety and any attachments thereto.
6:47 p.m.
On 29.10.2009 15:33 Uhr, Robert McGilvray wrote:
[...]
I wasn't able to compile by just switching out the three files, there
were unresolved symbols related to pv_free_extra_list();.
ok, probably is due to
other changes done later.
I finally got
around the firewalls here to checkout revision 5141 but it won't
compile.
the revision 5141 does not compile? Is the pure revision, right? No
files copied from one revision to another.
Cheers,
Daniel
The file it bails on is exactly the same as in 1.5.2
release so
I'm not sure why.
Compiling db/db_ut.c
/usr/sfw/bin/gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc
-mtune=ultrasparc -DNAME='"kamailio"'
-DVERSION='"1.5.0-dev9-tls"'
-DARCH='"sparc64"' -DOS='"solaris"'
-DCOMPILER='"/usr/sfw/bin/gcc
3.4.3"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_no
-DCFG_DIR='"/usr/local/kamailio-1.5.2/etc/kamailio/"' -DPKG_MALLOC
-DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
-DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC
-DSVNREVISION='"2:5141"' -DUSE_TLS -DFAST_LOCK -DADAPTIVE_WAIT
-DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H
-DHAVE_SCHED_YIELD -DHAVE_ALLOCA_H -DUSE_SIGACTION
-D_POSIX_PTHREAD_SEMANTICS -DHAVE_DEVPOLL -DHAVE_SELECT -I/ssl/include
-I/include -I/usr/include/openssl -c db/db_ut.c -o db/db_ut.o
In file included from db/db_ut.c:41:
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
db/db_ut.c: In function `db_str2longlong':
db/db_ut.c:75: warning: implicit declaration of function `strtoll'
db/db_ut.c: In function `db_int2str':
db/db_ut.c:114: warning: implicit declaration of function `snprintf'
gmake: *** [db/db_ut.o] Error 1
Unrelated question - I've tried changing the tuning options specified in
Makefile.defs to use the proper cpu arch and kept with -m32 since it has
to link against 32 bit libaries but even with that it builds the object
files as 64 bit. It then fails when linking kamailio. What's the proper
way to optimize the binary but keep all aspects of it 32? I tried
-mcpu=ultrasparc3 -m32 -threads -Wa,-xarch=v9b
It's an UltraSPARC-IIIi chip.
ykt1sipprd2# ls -1 *.o | xargs -n1 file
action.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
blacklists.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
cfg.tab.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
cmpapi.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
core_stats.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
crc.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
daemonize.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
data_lump.o: ELF 64-bit MSB relocatable SPARCV9 Version 1,
UltraSPARC3 Extensions Required
<snip>
Thanks!
Bob
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may contain
confidential and/or privileged information intended for the addressee(s) only. If you have
received this email in error, please contact the sender and immediately delete this email
in its entirety and any attachments thereto.
--
Daniel-Constantin Mierla
* Kamailio SIP Masterclass, Nov 9-13, 2009, Berlin
* http://www.asipto.com/index.php/sip-router-masterclass/
7:44 p.m.
-----Original Message-----
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Thursday, October 29, 2009 12:48 PM
To: Robert McGilvray
Cc: Henning Westerholt; users(a)lists.kamailio.org
Subject: Re: [Kamailio-Users] kam 1.5 syslog on solaris 10
On 29.10.2009 15:33 Uhr, Robert McGilvray wrote:
[...]
I wasn't able to compile by just switching out the three files, there
were unresolved symbols related to pv_free_extra_list();.
ok, probably is due to
other changes done later.
I finally got
around the firewalls here to checkout revision 5141 but it won't
compile.
the revision 5141 does not compile? Is the pure revision, right? No
files copied from one revision to another.
Cheers,
Daniel
--
Right - clean checkout from svn. The errors are below. I'm compiling
1.5.3 with the patch from Henning now.
The file it bails on is exactly the same as in 1.5.2
release so
I'm not sure why.
Compiling db/db_ut.c
/usr/sfw/bin/gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc
-mtune=ultrasparc -DNAME='"kamailio"'
-DVERSION='"1.5.0-dev9-tls"'
-DARCH='"sparc64"'
-DOS='"solaris"' -DCOMPILER='"/usr/sfw/bin/gcc
3.4.3"' -D__CPU_sparc64 -D__OS_solaris -D__SMP_no
-DCFG_DIR='"/usr/local/kamailio-1.5.2/etc/kamailio/"' -DPKG_MALLOC
-DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE
-DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC
-DSVNREVISION='"2:5141"' -DUSE_TLS -DFAST_LOCK -DADAPTIVE_WAIT
-DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H
-DHAVE_SCHED_YIELD -DHAVE_ALLOCA_H -DUSE_SIGACTION
-D_POSIX_PTHREAD_SEMANTICS -DHAVE_DEVPOLL -DHAVE_SELECT -I/ssl/include
-I/include -I/usr/include/openssl -c db/db_ut.c -o db/db_ut.o
In file included from db/db_ut.c:41:
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
/usr/include/stdlib.h:144: error: conflicting types for 'swab'
/usr/include/unistd.h:496: error: previous declaration of 'swab' was
here
db/db_ut.c: In function `db_str2longlong':
db/db_ut.c:75: warning: implicit declaration of function `strtoll'
db/db_ut.c: In function `db_int2str':
db/db_ut.c:114: warning: implicit declaration of function `snprintf'
gmake: *** [db/db_ut.o] Error 1
--------------------------------------------------------------------------
This email with all information contained herein or attached hereto may contain
confidential and/or privileged information intended for the addressee(s) only. If you have
received this email in error, please contact the sender and immediately delete this email
in its entirety and any attachments thereto.
5503
days inactive
5505
days old
9 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Henning Westerholt -
Robert McGilvray