Im very new to kamailio,
we have some ptime issues which causes one way audio due to varies PBX
vendors connecting to our class 5 softswitches
I would like to use Kamailio as the SIP/RTP proxy in front of our class 5
soft switches
I followed the example of freeswitch and kamailio. However the config is
still hard for me
below setup works, however RTP not being proxied, Looks like its its not,
because im not using NAT, so RTP goes direct
https://freeswitch.org/confluence/display/FREESWITCH/Kamailio+basic+setup+a…
I would like to to ensure RTP proxy is always used(possible re-framing
ptime) and we have multiple soft switches
Is it possible to setup kamailio.cfg so my customers can point the endpoint
to kamailio and domain names contains the server we want to use to register
with?
eg, softswitch 1 = 1.1.1.2
softswitch 2 = 1.1.1.3
softswitch 3 = 1.1.1.4
etc etc
my current config
#!KAMAILIO
#!define IPADDRESS "1.1.1.1"
#!define SWITCH_IPADDRESS "1.1.1.2"
#!define FLAG_FROM_SWITCH 1
#!define FLAG_FROM_USER 2
# ------------------ module loading ----------------------------------
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "sl.so"
loadmodule "maxfwd.so"
loadmodule "nathelper.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "path.so"
loadmodule "rtpproxy.so"
# ----------------- setting module-specific parameters ---------------
modparam("nathelper|registrar", "received_avp",
"$avp(s:rcv)")
# ------------------------- request routing logic -------------------
#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from",
"sip:pinger@kamailio.org")
# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif
# main routing logic
route {
# per request initial checks
route(SANITY_CHECK);
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans()) {
t_relay();
}
exit;
}
route(CHECK_SOURCE_IP);
##################################
### HANDLE SEQUENTIAL REQUESTS ###
route(WITHINDLG);
###############################
### HANDLE INITIAL REQUESTS ###
t_check_trans();
if (is_method("INVITE|REFER")) {
record_route();
}
if (is_method("REGISTER")) {
add_path();
}
if (isflagset(FLAG_FROM_SWITCH)) {
# don't send INVITE from SWITCH back to SWITCH, set reply
route to handle NAT and forward them along
t_on_reply("EXTERNAL_REPLY");
} else {
# set destination to your SWITCH
$du = "sip:1.1.1.2:5060";
}
route(RELAY);
}
route[SANITY_CHECK]
{
if (!sanity_check()) {
#xlog("L_WARN", "$ci|end|message is insane");
exit;
}
if (!mf_process_maxfwd_header("10")) {
#xlog("L_WARN", "$ci|end|too much hops, not enough
barley");
send_reply("483", "Too Many Hops");
exit;
}
if ($ua == "friendly-scanner" ||
$ua == "sundayddr" ||
$ua =~ "sipcli" ) {
#xlog("L_WARN", "$ci|end|dropping message with user-agent
$ua");
exit;
}
if ($si == IPADDRESS) {
#xlog("L_WARN", "$ci|end|dropping message");
exit;
}
}
route[CHECK_SOURCE_IP]
{
if ($si == SWITCH_IPADDRESS) {
setflag(FLAG_FROM_SWITCH);
} else {
setflag(FLAG_FROM_USER);
}
}
# Handle requests within SIP dialogs
route[WITHINDLG]
{
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
route(RELAY);
} else {
if (is_method("NOTIFY")) {
route(RELAY);
}
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
exit;
}
if (is_method("ACK")) {
if (t_check_trans()) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction
... ignore and discard
#xlog("ACK without matching
transaction ... ignore and discard");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}
onreply_route[EXTERNAL_REPLY]
{
route(NAT_TEST_AND_CORRECT);
}
route[NAT_TEST_AND_CORRECT]
{
if (nat_uac_test("3")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
fix_nated_contact();
}
force_rport();
}
if (has_body("application/sdp") && nat_uac_test("8"))
{
fix_nated_sdp("10");
}
}
route[RELAY]
{
#!ifdef WITH_NAT
if (check_route_param("nat=yes")) {
#setbflag(FLB_NATB);
route(RTPPROXY);
}
if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) {
route(RTPPROXY);
}
#!endif
route(RTPPROXY);
/* example how to enable some additional event routes */
if (is_method("INVITE")) {
#t_on_branch("BRANCH_ONE");
t_on_reply("REPLY_ONE");
t_on_failure("FAIL_ONE");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
# if (!t_relay()) {
# sl_reply_error();
# }
# exit;
}
# RTPProxy control
route[RTPPROXY] {
#!ifdef WITH_NAT
if (is_method("BYE")) {
#unforce_rtp_proxy();
force_rtp_proxy();
} else if (is_method("INVITE")){
force_rtp_proxy();
}
if (!has_totag()) add_rr_param(";nat=yes");
#!endif
return;
}