Marc, try this (as I have written in freeradius list) - should work fine if u follow the exact steps. I am compiling it statically since this was the building policy recommended by developers: 1. Grab the sources and unpack them (1.1.7 version) 2. After unpacking, run from within the source folder: ./configure --with-static-modules=python make 3. Your make will stop here: "libtool: link: cannot find the library `../modules/rlm_python/rlm_python.la' or unhandled argument `../modules/rlm_python/rlm_python.la'" 4. Go into ./src/modules/rlm_python 5. run ./configure + make + make install 6. Go back to root of sources and run again make + make install. Hope that will do, DanB On 8/23/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: > I'm receiving freeradius-users(a)lists.freeradius.org > Did you sent it there? > > I have posted some message there and some developpers said that rlm_python shouldn't be compiled statically... And that I should use the experimental > module option. So I don't know what to do in order to get your module working > > PS: I have tested it in console with python directly, Congratulations!! It works perfectly > > > > Dan-Cristian Bogos a écrit : >> SOLVED, check the freeradius list, I have posted there the solution. >> >> DanB >> >> On 8/23/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>> I have copied the missing radpaths.h from 1.1.7 source, but there is still an error! (libradius.la) >>> Why is ir so important de compile de python module statically?? >>> >>> Can we compile the experimental modules?? >>> >>> rlm_python.c: At top level: >>> rlm_python.c:244: warning: function declaration isn't a prototype >>> rlm_python.c: In function 'python_load_function': >>> rlm_python.c:456: warning: passing argument 2 of 'PyObject_GetAttrString' discards qualifiers from pointer target type >>> gcc -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -Wall -D_GNU_SOURCE -g -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings >>> -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -W -Wredundant-decls -Wundef >>> -I/home/mleurent/freeradius/official/freeradius-1.1.6/src/include -I/usr/include/python2.4 -c rlm_python.c -o rlm_python.o >/dev/null 2>&1 >>> /home/mleurent/freeradius/official/freeradius-1.1.6/libtool --mode=link gcc -release 1.1.6 \ >>> -module -static -o rlm_python.la \ >>> -rpath /usr/local/lib rlm_python.lo rlm_python.c /home/mleurent/freeradius/official/freeradius-1.1.6/src/lib/libradius.la \ >>> -L/usr/lib/python2.4/config -lpthread -ldl -lutil -lpython2.4 -lm -lnsl -lresolv -lpthread >>> libtool: link: cannot find the library `/home/mleurent/freeradius/official/freeradius-1.1.6/src/lib/libradius.la' or unhandled argument >>> `/home/mleurent/freeradius/official/freeradius-1.1.6/src/lib/libradius.la' >>> make: *** [rlm_python.la] Error 1 >>> zsh: exit 2 make >>> >>> >>> Dan-Cristian Bogos a écrit : >>>> Ok, try a trick then, >>>> >>>> 1. in root folder type: >>>> >>>> ./configure --with-static-modules=python >>>> >>>> 2. go in ./src/modules/rlm_python/ and try after the installation >>>> procedure: ./configure + make + make install >>>> 3. Go back to root folder and try again the installation procedure >>>> (./configure --with-static-modules=python + make + make install). >>>> >>>> Let me know how it goes. >>>> >>>> DanB >>>> >>>> On 8/23/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>> I cannot do it! >>>>> Sniff again >>>>> >>>>> SCREEN):root@sd-7501:[/home/../freeradius-1.1.6]# cd src/modules/rlm_python >>>>> (SCREEN):root@sd-7501:[~mleurent/../rlm_python]# ./configure >>>>> checking for gcc... gcc >>>>> checking for C compiler default output file name... a.out >>>>> checking whether the C compiler works... yes >>>>> checking whether we are cross compiling... no >>>>> checking for suffix of executables... >>>>> checking for suffix of object files... o >>>>> checking whether we are using the GNU C compiler... yes >>>>> checking whether gcc accepts -g... yes >>>>> checking for gcc option to accept ANSI C... none needed >>>>> checking how to run the C preprocessor... gcc -E >>>>> checking for python2.3... no >>>>> checking for python2.2... no >>>>> checking for python2.1... no >>>>> checking for python1.5... no >>>>> checking for python... python >>>>> checking for Python.h... yes >>>>> checking for Py_Initialize in -lpython2.4... yes >>>>> configure: creating ./config.status >>>>> config.status: creating Makefile >>>>> >>>>> (SCREEN):root@sd-7501:[~mleurent/../rlm_python]# make >>>>> ../rules.mak:24: ../../../Make.inc: No such file or directory >>>>> make: *** No rule to make target `../../../Make.inc'. Stop. >>>>> zsh: exit 2 make >>>>> >>>>> >>>>> Dan-Cristian Bogos a écrit : >>>>>> Hi Marc, >>>>>> >>>>>> it looks like there has been some changes with freeradius 1.7 since >>>>>> this one does not install for me either. It says :" ibtool: link: >>>>>> cannot find the library >>>>>> `/usr/local/src/freeradius/freeradius-1.1.7/src/lib/libradius.la' or >>>>>> unhandled argument >>>>>> `/usr/local/src/freeradius/freeradius-1.1.7/src/lib/libradius.la'". On >>>>>> a manual search I could see that this library is not longer included >>>>>> with the sources. I will try asking the guys from freeradius about the >>>>>> changes necessary to work. >>>>>> In the mean time, if u want to give it a try, here is how I have >>>>>> installed from freeradius 1.6: >>>>>> 1. Download the sources: "wget >>>>>> ftp://ftp.freeradius.org/pub/radius/freeradius-1.1.6.tar.gz" >>>>>> 2. Extract and get into the source folder. >>>>>> 3. Go to ./src/modules/rlm_python/ >>>>>> 4. Install the sources statically: (./configure + make + make install). >>>>>> 5. Go back to root folder for the sources >>>>>> 6. ./configure --with-static-modules=python >>>>>> 7. make + make install. >>>>>> >>>>>> Hope that would do for you. >>>>>> >>>>>> Cheers, >>>>>> DanB >>>>>> >>>>>> On 8/22/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>> I have another error with freeradius 1.1.7 from source, I don't know why it cannot find the module... >>>>>>> I'll check tomorrow >>>>>>> Yhanks for your help Dan, have a pleasant evening >>>>>>> >>>>>>> rlm_sql_mysql: Starting connect to MySQL server for #3 >>>>>>> rlm_sql (sql): Connected new DB handle, #3 >>>>>>> rlm_sql (sql): starting 4 >>>>>>> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 >>>>>>> rlm_sql_mysql: Starting connect to MySQL server for #4 >>>>>>> rlm_sql (sql): Connected new DB handle, #4 >>>>>>> Module: Instantiated sql (sql) >>>>>>> python_init done >>>>>>> Module: Loaded python >>>>>>> python: mod_instantiate = "freeradius-cdrtool" >>>>>>> python: func_instantiate = "instantiate" >>>>>>> python: mod_authorize = "freeradius-cdrtool" >>>>>>> python: func_authorize = "authorize" >>>>>>> python: mod_authenticate = "(null)" >>>>>>> python: func_authenticate = "(null)" >>>>>>> python: mod_preacct = "(null)" >>>>>>> python: func_preacct = "(null)" >>>>>>> python: mod_accounting = "freeradius-cdrtool" >>>>>>> python: func_accounting = "accounting" >>>>>>> python: mod_checksimul = "(null)" >>>>>>> python: func_checksimul = "(null)" >>>>>>> python: mod_detach = "freeradius-cdrtool" >>>>>>> python: func_detach = "detach" >>>>>>> rlm_python:python_load_function: module 'freeradius-cdrtool' is not found >>>>>>> rlm_python:EXCEPT:exceptions.ImportError: /usr/lib/python2.4/lib-dynload/_socket.so: undefined symbol: _Py_TrueStruct >>>>>>> rlm_python:python_load_function: failed to import python function 'freeradius-cdrtool.instantiate' >>>>>>> radiusd.conf[541]: python: Module instantiation failed. >>>>>>> radiusd.conf[1900] Unknown module "python". >>>>>>> radiusd.conf[1803] Failed to parse authorize section. >>>>>>> zsh: exit 1 radiusd -X >>>>>>> >>>>>>> >>>>>>> >>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>> You are getting this error because the interpreter does not accept "-" >>>>>>>> in the name. I didn't need to import it in the interpreter and there >>>>>>>> will be no use since radiusd package is available only within >>>>>>>> freeradius process. >>>>>>>> >>>>>>>> Thxs, >>>>>>>> DanB >>>>>>>> >>>>>>>> On 8/22/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>>>> Do you have this error? >>>>>>>>> When I try to load your module in mython, I have this error because of the dash.. >>>>>>>>> >>>>>>>>> >>>>>>>>> root@sd-7501:[/home/../freeradius-cdrtool-1.0]# python >>>>>>>>> Python 2.4.4 (#2, Apr 5 2007, 20:11:18) >>>>>>>>> [GCC 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)] on linux2 >>>>>>>>> Type "help", "copyright", "credits" or "license" for more information. >>>>>>>>>>>> import freeradius-cdrtool >>>>>>>>> File "<stdin>", line 1 >>>>>>>>> import freeradius-cdrtool >>>>>>>>> ^ >>>>>>>>> SyntaxError: invalid syntax >>>>>>>>>>>> import setup >>>>>>>>> usage: [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...] >>>>>>>>> or: --help [cmd1 cmd2 ...] >>>>>>>>> or: --help-commands >>>>>>>>> or: cmd --help >>>>>>>>> >>>>>>>>> error: no commands supplied >>>>>>>>> zsh: exit 1 python >>>>>>>>> >>>>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>>>> Marc, >>>>>>>>>> >>>>>>>>>> This is still an error from python, not my module. I think it has >>>>>>>>>> something to do with linking inside between C and python. What were >>>>>>>>>> the steps in your freeradius installation? >>>>>>>>>> >>>>>>>>>> DanB >>>>>>>>>> >>>>>>>>>> On 8/22/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>>>>>> I have compiled the experimental modules, now the python module is working but I have an error with yours... >>>>>>>>>>> I have changed the rlm_digest.c and fixed the sql module to work with procedure >>>>>>>>>>> >>>>>>>>>>> rlm_sql (sql): Connected new DB handle, #4 >>>>>>>>>>> Module: Instantiated sql (sql) >>>>>>>>>>> python_init done >>>>>>>>>>> Module: Loaded python >>>>>>>>>>> python: mod_instantiate = "freeradius-cdrtool" >>>>>>>>>>> python: func_instantiate = "instantiate" >>>>>>>>>>> python: mod_authorize = "freeradius-cdrtool" >>>>>>>>>>> python: func_authorize = "authorize" >>>>>>>>>>> python: mod_authenticate = "(null)" >>>>>>>>>>> python: func_authenticate = "(null)" >>>>>>>>>>> python: mod_preacct = "(null)" >>>>>>>>>>> python: func_preacct = "(null)" >>>>>>>>>>> python: mod_accounting = "freeradius-cdrtool" >>>>>>>>>>> python: func_accounting = "accounting" >>>>>>>>>>> python: mod_checksimul = "(null)" >>>>>>>>>>> python: func_checksimul = "(null)" >>>>>>>>>>> python: mod_detach = "freeradius-cdrtool" >>>>>>>>>>> python: func_detach = "detach" >>>>>>>>>>> exceptions.ImportError: /usr/lib/python2.4/lib-dynload/_socket.so: undefined symbol: _Py_TrueStruct >>>>>>>>>>> Failed to import python module "freeradius-cdrtool" >>>>>>>>>>> radiusd.conf[544]: python: Module instantiation failed. >>>>>>>>>>> radiusd.conf[1884] Unknown module "python". >>>>>>>>>>> radiusd.conf[1792] Failed to parse authorize section. >>>>>>>>>>> zsh: exit 1 freeradius -X >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>>>>>> You can get it from here: >>>>>>>>>>>> http://frad-cdrtool.sourceforge.net/rlm_digest.c >>>>>>>>>>>> >>>>>>>>>>>> DanB >>>>>>>>>>>> >>>>>>>>>>>> On 8/22/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>>>>>>>> I haven't found this patch on http://sourceforge.net/projects/frad-cdrtool... >>>>>>>>>>>>> Where did you found it? >>>>>>>>>>>>> Thanks >>>>>>>>>>>>> >>>>>>>>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>>>>>>>> Marc, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I don't have this problem. >>>>>>>>>>>>>> I have compiled freeradius with rlm_python from sources. >>>>>>>>>>>>>> >>>>>>>>>>>>>> For problems with freeradius, I think the best would be to grab some >>>>>>>>>>>>>> support directly from their mailing list, since they are pretty >>>>>>>>>>>>>> helpful. Don't forget about patching also rlm_digest in order to >>>>>>>>>>>>>> sanitize the params coming from OpenSER in the authorization phase and >>>>>>>>>>>>>> not the authentication one. They promised for future releases to >>>>>>>>>>>>>> include this patch inside the distribution. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>> DanB >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 8/22/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>>>>>>>>>> I have corrected it: mea culpa >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> But now I have a real trouble: >>>>>>>>>>>>>>> When I start freeradius, it said that it can't find rlm_python.so, but this is normal because we added --with-static-modules=python >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Did you have thos problem? >>>>>>>>>>>>>>> Do you know how to correct it? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> rlm_sql (sql): Connected new DB handle, #4 >>>>>>>>>>>>>>> Module: Instantiated sql (sql) >>>>>>>>>>>>>>> radiusd.conf[544] Failed to link to module 'rlm_python': rlm_python.so: cannot open shared object file: No such file or directory >>>>>>>>>>>>>>> radiusd.conf[1884] Unknown module "python". >>>>>>>>>>>>>>> radiusd.conf[1792] Failed to parse authorize section. >>>>>>>>>>>>>>> zsh: exit 1 freeradius -X >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>>>>>>>>>> Hi Marc, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> it looks like you are getting some problems related to stored >>>>>>>>>>>>>>>> procedure in your mysql database. Did u install also the radius patch >>>>>>>>>>>>>>>> recommended by AG-Projects in order to work properly with stored >>>>>>>>>>>>>>>> procedures? On the sql side I cannot help you too much since I am >>>>>>>>>>>>>>>> using still the normal sql queries without stored procedures. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> DanB >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On 8/22/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>>>>>>>>>>>> I have followed your advice, Freeradius is recompiled with rlm_python, >>>>>>>>>>>>>>>>> byt know, rlm_sql seems to encountered troubles >>>>>>>>>>>>>>>>> like : >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> rlm_sql (sql): Reserving sql socket id: 2 >>>>>>>>>>>>>>>>> rlm_sql_mysql: MYSQL check_error: 1312 received >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Any idea of how to repair this? >>>>>>>>>>>>>>>>> Thanks >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I have added this in my debian/rules file: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> modulelist=krb5 ldap sql_mysql sql_iodbc python >>>>>>>>>>>>>>>>> ... >>>>>>>>>>>>>>>>> ... >>>>>>>>>>>>>>>>> ./configure \ >>>>>>>>>>>>>>>>> $(confflags) \ >>>>>>>>>>>>>>>>> --prefix=/usr \ >>>>>>>>>>>>>>>>> ... \ >>>>>>>>>>>>>>>>> --with-static-modules=python >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Here is my freeradius debug: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> rlm_detail: /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/detail-20070822 >>>>>>>>>>>>>>>>> modcall[accounting]: module "detail" returns ok for request 5 >>>>>>>>>>>>>>>>> modcall[accounting]: module "unix" returns noop for request 5 >>>>>>>>>>>>>>>>> radius_xlat: '/var/log/freeradius/radutmp' >>>>>>>>>>>>>>>>> radius_xlat: '' >>>>>>>>>>>>>>>>> modcall[accounting]: module "radutmp" returns ok for request 5 >>>>>>>>>>>>>>>>> radius_xlat: '' >>>>>>>>>>>>>>>>> radius_xlat: ' CALL insert_radacct_record( 'radius', &#39;52f74a-c0a80101-0-4(a)192.168.95.79&#39;.79', >>>>>>>>>>>>>>>>> '36afb36cd5c82c34', 'sip:101@sd-7501.dedibox.fr:5060=3Buser=3Dphone', >>>>>>>>>>>>>>>>> 'sip:101@sd-7501.dedibox.fr:5060=3Buser=3Dphone', '88.191.45.91', '5060', '2007-08-22 13:59:25', >>>>>>>>>>>>>>>>> '0', '0', '0', '0', '', '', '200', >>>>>>>>>>>>>>>>> 'Sip-Session', '', '', '0', '0', '200', >>>>>>>>>>>>>>>>> 'INVITE', '', 'c0a80101-5766ea7', 'c0a80101-4e8244', '', '', >>>>>>>>>>>>>>>>> '', 'sip:0033677832974@sd-7501.dedibox.fr:5060=3Buser=3Dphone', '', '' )' >>>>>>>>>>>>>>>>> rlm_sql (sql): Reserving sql socket id: 2 >>>>>>>>>>>>>>>>> rlm_sql_mysql: MYSQL check_error: 1312 received >>>>>>>>>>>>>>>>> rlm_sql (sql): Couldn't insert SQL accounting START record - PROCEDURE radius.insert_radacct_record can't return a result set in the given context >>>>>>>>>>>>>>>>> radius_xlat: '' >>>>>>>>>>>>>>>>> rlm_sql (sql): Released sql socket id: 2 >>>>>>>>>>>>>>>>> modcall[accounting]: module "sql" returns ok for request 5 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>>>>>>>>>>>> Marc, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I would suggest as first step reading about how prepaid works in >>>>>>>>>>>>>>>>>> CDRTool. (see PREPAID.txt in doc folder). >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I personally use freeradius-cdrtool connector >>>>>>>>>>>>>>>>>> (sourceforge.net/projects/frad-cdrtool), which I have written in >>>>>>>>>>>>>>>>>> python and which needs rlm_python compiled into freeradius server. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Have a look on all the info and let me know if u need any additional. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>>>> DanB >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On 8/20/07, Marc LEURENT &lt;lftsy(a)free.fr&gt; wrote: >>>>>>>>>>>>>>>>>>> No... >>>>>>>>>>>>>>>>>>> Is it possible to do it with openser or is it compulsory to use asterisk? >>>>>>>>>>>>>>>>>>> What do you use? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Dan-Cristian Bogos a écrit : >>>>>>>>>>>>>>>>>>>> Hi there Marc, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> are you using any application which locks, unlocks the prepaid >>>>>>>>>>>>>>>>>>>> accounts, and instructs CDRTool to update the user's balance? Are you >>>>>>>>>>>>>>>>>>>> aware that CDRTool uses separate applications for prepaid and postpaid >>>>>>>>>>>>>>>>>>>> accounts? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> DanB >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users(a)openser.org >>>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users