[Serusers] SIP + RTPPROXY + NEED HELP - sr-users

12 Apr 2005


      Hello, guys!
Here is my situation:
I have 2 ADSL at home:
I have set up a linux(debian) SER +RTPPROXY on of the ADSL
and i use the other Adsl for internet
here:
me ----> 192.168.0.xx(SER with two ethernet int)
|
192.168.0.x(default gateway)
|
internet
I`m using Xphone-Lite.
I would like to contact another person registered on the outside interface of Ser(i`m registering from the interior).
Internet IP <---> outside interface(SER)(lan)<---->me
But that`s not working
What`s should be the mistake(from sipsak i got:
from the internet user: sipsak -s sip:adress_registered_from_lan@myADLShere
returns my other ADSL line.
and from sipsak -s sip:internet_number_user@myADSLhere i got sip:internet_number_user@HIS_IP_ADDRESS
rttproxy is isntalled(build from cvs this morning)
SER.cfg is :------------------->>>>>>>>><<<<<<<<<<<--------------------
# ----------- global configuration parameters ------------------------
debug=3         # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode
#debug=7
#Fork=no
#log_stderror=yes
#*/
check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
#Listen=83.228.8.112
children=2
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/textops.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/nathelper.so"
#loadmodule "/usr/lib/ser/modules/domain.so"
#loadmodule "/usr/lib/ser/modules/mediaproxy.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/lib/ser/modules/auth.so"
#loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode",   0)
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 60)
modparam("nathelper", "ping_nated_only", 1)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -------------------------  request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (msg:len >=  max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };
# !! Nathelper
        # Special handling for NATed clients; first, NAT test is
        # executed: it looks for via!=received and RFC1918 addresses
        # in Contact (may fail if line-folding is used); also,
        # the received test should, if completed, should check all
        # vias for rpesence of received
        if (nat_uac_test("3")) {
                # Allow RR-ed requests, as these may indicate that
                # a NAT-enabled proxy takes care of it; unless it is
                # a REGISTER
if (method == "REGISTER" || ! search("^Record-Route:")) {
                    log("LOG: Someone trying to register from private IP, rewriting\n");
# This will work only for user agents that support symmetric
                    # communication. We tested quite many of them and majority is
                    # smart enough to be symmetric. In some phones it takes a configuration
                    # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is
                    # called "symmetric media" and "symmetric signalling".
fix_nated_contact(); # Rewrite contact with source IP of signalling
                    if (method == "INVITE") {
                        fix_nated_sdp("1"); # Add direction=active to SDP
                    };
                    force_rport(); # Add rport parameter to topmost Via
                    setflag(6);    # Mark as NATed
                };
        };
# we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
        # path determined by record-routing
        if (loose_route()) {
                # mark routing logic in request
                append_hf("P-hint: rr-enforced\r\n");
                route(1);
                break;
        };
if (!uri==myself) {
                # mark routing logic in request
                append_hf("P-hint: outbound\r\n");
                route(1);
                break;
        };
# if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
#                       if (!www_authorize("iptel.org", "subscriber")) {
#                               www_challenge("iptel.org", "0");
#                               break;
#                       };
save("location");
                        break;
                };
lookup("aliases");
                if (!uri==myself) {
                        append_hf("P-hint: outbound alias\r\n");
                        route(1);
                        break;
                };
# native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        append_hf("P-hint: usrloc applied\r\n");
        route(1);
}
route[1]
{
# if client or server know to be behind a NAT, enable relay
        if (isflagset(6)) {
            force_rtp_proxy();
        };
# NAT processing of replies; apply to all transactions (for example,
        # re-INVITEs from public to private UA are hard to identify as
        # NATed at the moment of request processing); look at replies
        t_on_reply("1");
# send it out now; use stateful forwarding as it works reliably
        # even for UDP2TCP
        if (!t_relay()) {
                sl_reply_error();
        };
}
# !! Nathelper
onreply_route[1] {
    # NATed transaction ?
    if (isflagset(6))
{
#&& status =~ "(10)[0-9]") {
        fix_nated_contact();
        force_rtp_proxy();
    # otherwise, is it a transaction behind a NAT and we did not
    # know at time of request processing ? (RFC1918 contacts)
    } else if (nat_uac_test("1")) {
        fix_nated_contact();
    };
}
-----------------------------------------------------------------
http://host.GBG.bg - лидер в Уеб Хостинг решения и регистрация на Домейн имена