14 Aug
2019
14 Aug
'19
1:15 a.m.
Hi
I am new to Kamailio and would like some guidance on linking up with Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension and pbx
username (eg 1001-126252581276) and I want to move it over to Kamailio/Freeswitch without
re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good fit due
to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the above username
and then send an extension to Freeswitch as the UserID instead, thereby separating the
Kamailio authentication from the Freeswitch UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch interaction, I
don't know whether this will cause other issues?
Thanks in advance
Petarr
14 Aug
14 Aug
1:33 a.m.
Is the users data asterisk uses in a db? If so, you can use the usrloc
module to actually get the authentication info from that dB table. Check it
out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones <petarrjones(a)outlook.com> wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with
Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension
and pbx username (eg 1001-126252581276) and I want to move it over to
Kamailio/Freeswitch without re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good
fit due to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the
above username and then send an extension to Freeswitch as the UserID
instead, thereby separating the Kamailio authentication from the Freeswitch
UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch
interaction, I don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
1:42 a.m.
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different provider and I am
wanting to bring the PBX in-house. Once migrated the asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am moving to a
different solution. The reason for wanting to stay with the same username is testing. If I
could just change the dns record for the SIP server, then the phones will automatically
connect to the new system and if there are any issues, I can just switch the dns record
back.
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David Villasmil
<david.villasmil.work(a)gmail.com>
Sent: 13 August 2019 22:33
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc module to actually
get the authentication info from that dB table. Check it out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones
<petarrjones@outlook.com<mailto:petarrjones@outlook.com>> wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension and pbx
username (eg 1001-126252581276) and I want to move it over to Kamailio/Freeswitch without
re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good fit due
to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the above username
and then send an extension to Freeswitch as the UserID instead, thereby separating the
Kamailio authentication from the Freeswitch UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch interaction, I
don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
2:07 a.m.
I see.
Ok but you somehow need those user/passwords to authenticate.
It’s simple, add those users/pass to the dB table in kamailio.
You configure /etc/kamailio/kamctlrc for your db, then to create the
database you
execute:
kamdbctl create
You end up with the kamailio database, and insert your records in the
“subscriber” table. Then configure usrloc to get the users’ authentication
info from that table.
Hope that helps!
David
On Wed, 14 Aug 2019 at 06:44, Petarr Jones <petarrjones(a)outlook.com> wrote:
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different
provider and I am wanting to bring the PBX in-house. Once migrated the
asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am
moving to a different solution. The reason for wanting to stay with the
same username is testing. If I could just change the dns record for the SIP
server, then the phones will automatically connect to the new system and if
there are any issues, I can just switch the dns record back.
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David
Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 22:33
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc
module to actually get the authentication info from that dB table. Check it
out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with
Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension
and pbx username (eg 1001-126252581276) and I want to move it over to
Kamailio/Freeswitch without re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good
fit due to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the
above username and then send an extension to Freeswitch as the UserID
instead, thereby separating the Kamailio authentication from the Freeswitch
UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch
interaction, I don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
2:39 a.m.
Hi David
I am clearly not articulating the issue properly. I don't have a problem with the
authentication from a Kamailio perspective but rather trying to understand how I would
authenticate a user in Kamailio based on a different user name than in Freeswitch.
As an example, I would like the phone to authenticate with Kamailio as user
"1001-126252581276" but the resulting backend to Freeswitch be done only using
the extension "1001", since Freeswitch seems far more comfortable with the
UserID and extension being the same rather than trying to use
"1001-126252581276" in Freeswitch and rely on "number-alias" for the
extension.
Regards
Petarr
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David Villasmil
<david.villasmil.work(a)gmail.com>
Sent: 13 August 2019 23:07
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
I see.
Ok but you somehow need those user/passwords to authenticate.
It’s simple, add those users/pass to the dB table in kamailio.
You configure /etc/kamailio/kamctlrc for your db, then to create the database you
execute:
kamdbctl create
You end up with the kamailio database, and insert your records in the “subscriber” table.
Then configure usrloc to get the users’ authentication info from that table.
Hope that helps!
David
On Wed, 14 Aug 2019 at 06:44, Petarr Jones
<petarrjones@outlook.com<mailto:petarrjones@outlook.com>> wrote:
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different provider and I am
wanting to bring the PBX in-house. Once migrated the asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am moving to a
different solution. The reason for wanting to stay with the same username is testing. If I
could just change the dns record for the SIP server, then the phones will automatically
connect to the new system and if there are any issues, I can just switch the dns record
back.
________________________________
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Sent: 13 August 2019 22:33
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc module to actually
get the authentication info from that dB table. Check it out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones
<petarrjones@outlook.com<mailto:petarrjones@outlook.com>> wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension and pbx
username (eg 1001-126252581276) and I want to move it over to Kamailio/Freeswitch without
re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good fit due
to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the above username
and then send an extension to Freeswitch as the UserID instead, thereby separating the
Kamailio authentication from the Freeswitch UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch interaction, I
don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
3:13 a.m.
Sorry Petarr,
I still don’t fully understand.
Let’s put it this way.
Users will register on kamailio using the schemes you just pasted, i.e.:
1001-123456789, and from there, whenever they make a call to another
extension in freeswitch, you say fs doesn’t like the extension scheme so
you want to do something like 1001 instead? I.e.: remove anything from the
- on?
On Wed, 14 Aug 2019 at 07:41, Petarr Jones <petarrjones(a)outlook.com> wrote:
Hi David
I am clearly not articulating the issue properly. I don't have a problem
with the authentication from a Kamailio perspective but rather trying to
understand how I would authenticate a user in Kamailio based on a different
user name than in Freeswitch.
As an example, I would like the phone to authenticate with Kamailio as
user "1001-126252581276" but the resulting backend to Freeswitch be done
only using the extension "1001", since Freeswitch seems far more
comfortable with the UserID and extension being the same rather than trying
to use "1001-126252581276" in Freeswitch and rely on "number-alias"
for the
extension.
Regards
Petarr
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David
Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 23:07
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
I see.
Ok but you somehow need those user/passwords to authenticate.
It’s simple, add those users/pass to the dB table in kamailio.
You configure /etc/kamailio/kamctlrc for your db, then to create the
database you
execute:
kamdbctl create
You end up with the kamailio database, and insert your records in the
“subscriber” table. Then configure usrloc to get the users’ authentication
info from that table.
Hope that helps!
David
On Wed, 14 Aug 2019 at 06:44, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different
provider and I am wanting to bring the PBX in-house. Once migrated the
asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am
moving to a different solution. The reason for wanting to stay with the
same username is testing. If I could just change the dns record for the SIP
server, then the phones will automatically connect to the new system and if
there are any issues, I can just switch the dns record back.
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David
Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 22:33
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc
module to actually get the authentication info from that dB table. Check it
out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with
Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension
and pbx username (eg 1001-126252581276) and I want to move it over to
Kamailio/Freeswitch without re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good
fit due to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the
above username and then send an extension to Freeswitch as the UserID
instead, thereby separating the Kamailio authentication from the Freeswitch
UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch
interaction, I don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
3:15 a.m.
You may want to come in on the slack channel. Easier.
On Wed, 14 Aug 2019 at 08:13, David Villasmil <
david.villasmil.work(a)gmail.com> wrote:
Sorry Petarr,
I still don’t fully understand.
Let’s put it this way.
Users will register on kamailio using the schemes you just pasted, i.e.:
1001-123456789, and from there, whenever they make a call to another
extension in freeswitch, you say fs doesn’t like the extension scheme so
you want to do something like 1001 instead? I.e.: remove anything from the
- on?
On Wed, 14 Aug 2019 at 07:41, Petarr Jones <petarrjones(a)outlook.com>
wrote:
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
Hi David
I am clearly not articulating the issue properly. I don't have a problem
with the authentication from a Kamailio perspective but rather trying to
understand how I would authenticate a user in Kamailio based on a different
user name than in Freeswitch.
As an example, I would like the phone to authenticate with Kamailio as
user "1001-126252581276" but the resulting backend to Freeswitch be done
only using the extension "1001", since Freeswitch seems far more
comfortable with the UserID and extension being the same rather than trying
to use "1001-126252581276" in Freeswitch and rely on "number-alias"
for the
extension.
Regards
Petarr
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
David Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 23:07
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
I see.
Ok but you somehow need those user/passwords to authenticate.
It’s simple, add those users/pass to the dB table in kamailio.
You configure /etc/kamailio/kamctlrc for your db, then to create the
database you
execute:
kamdbctl create
You end up with the kamailio database, and insert your records in the
“subscriber” table. Then configure usrloc to get the users’ authentication
info from that table.
Hope that helps!
David
On Wed, 14 Aug 2019 at 06:44, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different
provider and I am wanting to bring the PBX in-house. Once migrated the
asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am
moving to a different solution. The reason for wanting to stay with the
same username is testing. If I could just change the dns record for the SIP
server, then the phones will automatically connect to the new system and if
there are any issues, I can just switch the dns record back.
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
David Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 22:33
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc
module to actually get the authentication info from that dB table. Check it
out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with
Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of
extension and pbx username (eg 1001-126252581276) and I want to move it
over to Kamailio/Freeswitch without re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good
fit due to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the
above username and then send an extension to Freeswitch as the UserID
instead, thereby separating the Kamailio authentication from the Freeswitch
UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch
interaction, I don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
9:51 a.m.
Thanks David
How do I get an invite to the slack channel?
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David Villasmil
<david.villasmil.work(a)gmail.com>
Sent: 14 August 2019 00:15
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
You may want to come in on the slack channel. Easier.
On Wed, 14 Aug 2019 at 08:13, David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
wrote:
Sorry Petarr,
I still don’t fully understand.
Let’s put it this way.
Users will register on kamailio using the schemes you just pasted, i.e.: 1001-123456789,
and from there, whenever they make a call to another extension in freeswitch, you say fs
doesn’t like the extension scheme so you want to do something like 1001 instead? I.e.:
remove anything from the - on?
On Wed, 14 Aug 2019 at 07:41, Petarr Jones
<petarrjones@outlook.com<mailto:petarrjones@outlook.com>> wrote:
Hi David
I am clearly not articulating the issue properly. I don't have a problem with the
authentication from a Kamailio perspective but rather trying to understand how I would
authenticate a user in Kamailio based on a different user name than in Freeswitch.
As an example, I would like the phone to authenticate with Kamailio as user
"1001-126252581276" but the resulting backend to Freeswitch be done only using
the extension "1001", since Freeswitch seems far more comfortable with the
UserID and extension being the same rather than trying to use
"1001-126252581276" in Freeswitch and rely on "number-alias" for the
extension.
Regards
Petarr
________________________________
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Sent: 13 August 2019 23:07
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
I see.
Ok but you somehow need those user/passwords to authenticate.
It’s simple, add those users/pass to the dB table in kamailio.
You configure /etc/kamailio/kamctlrc for your db, then to create the database you
execute:
kamdbctl create
You end up with the kamailio database, and insert your records in the “subscriber” table.
Then configure usrloc to get the users’ authentication info from that table.
Hope that helps!
David
On Wed, 14 Aug 2019 at 06:44, Petarr Jones
<petarrjones@outlook.com<mailto:petarrjones@outlook.com>> wrote:
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different provider and I am
wanting to bring the PBX in-house. Once migrated the asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am moving to a
different solution. The reason for wanting to stay with the same username is testing. If I
could just change the dns record for the SIP server, then the phones will automatically
connect to the new system and if there are any issues, I can just switch the dns record
back.
________________________________
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Sent: 13 August 2019 22:33
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc module to actually
get the authentication info from that dB table. Check it out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones
<petarrjones@outlook.com<mailto:petarrjones@outlook.com>> wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension and pbx
username (eg 1001-126252581276) and I want to move it over to Kamailio/Freeswitch without
re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good fit due
to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the above username
and then send an extension to Freeswitch as the UserID instead, thereby separating the
Kamailio authentication from the Freeswitch UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch interaction, I
don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
--
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
12:53 p.m.
Go to
https://join.slack.com/t/kamailio/shared_invite/enQtNDY1NDc5MzMwNDIzLWJlNTF…
On Wed, 14 Aug 2019 at 14:53, Petarr Jones <petarrjones(a)outlook.com> wrote:
Thanks David
How do I get an invite to the slack channel?
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David
Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 14 August 2019 00:15
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
You may want to come in on the slack channel. Easier.
On Wed, 14 Aug 2019 at 08:13, David Villasmil <
david.villasmil.work(a)gmail.com> wrote:
Sorry Petarr,
I still don’t fully understand.
Let’s put it this way.
Users will register on kamailio using the schemes you just pasted, i.e.:
1001-123456789, and from there, whenever they make a call to another
extension in freeswitch, you say fs doesn’t like the extension scheme so
you want to do something like 1001 instead? I.e.: remove anything from the
- on?
On Wed, 14 Aug 2019 at 07:41, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Hi David
I am clearly not articulating the issue properly. I don't have a problem
with the authentication from a Kamailio perspective but rather trying to
understand how I would authenticate a user in Kamailio based on a different
user name than in Freeswitch.
As an example, I would like the phone to authenticate with Kamailio as
user "1001-126252581276" but the resulting backend to Freeswitch be done
only using the extension "1001", since Freeswitch seems far more
comfortable with the UserID and extension being the same rather than trying
to use "1001-126252581276" in Freeswitch and rely on "number-alias"
for the
extension.
Regards
Petarr
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David
Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 23:07
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
I see.
Ok but you somehow need those user/passwords to authenticate.
It’s simple, add those users/pass to the dB table in kamailio.
You configure /etc/kamailio/kamctlrc for your db, then to create the
database you
execute:
kamdbctl create
You end up with the kamailio database, and insert your records in the
“subscriber” table. Then configure usrloc to get the users’ authentication
info from that table.
Hope that helps!
David
On Wed, 14 Aug 2019 at 06:44, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Thanks David.
The asterisk PBX is being shut down as it is hosted with a different
provider and I am wanting to bring the PBX in-house. Once migrated the
asterisk PBX will be gone/deleted.
I don't have access to any of the Asterisk backend, which is why I am
moving to a different solution. The reason for wanting to stay with the
same username is testing. If I could just change the dns record for the SIP
server, then the phones will automatically connect to the new system and if
there are any issues, I can just switch the dns record back.
------------------------------
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of David
Villasmil <david.villasmil.work(a)gmail.com>
*Sent:* 13 August 2019 22:33
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
Is the users data asterisk uses in a db? If so, you can use the usrloc
module to actually get the authentication info from that dB table. Check it
out.
On Wed, 14 Aug 2019 at 06:17, Petarr Jones <petarrjones(a)outlook.com>
wrote:
Hi
I am new to Kamailio and would like some guidance on linking up with
Freeswitch.
I have an exiting hosted Asterisk PBX that uses a combination of extension
and pbx username (eg 1001-126252581276) and I want to move it over to
Kamailio/Freeswitch without re-configuring the SIP phones.
I have tried Freeswitch "number-alias" but it does not seem like a good
fit due to things like BLF not working and the added overhead etc.
Is there a way to configure Kamailio to authenticate a user based on the
above username and then send an extension to Freeswitch as the UserID
instead, thereby separating the Kamailio authentication from the Freeswitch
UserID?
As I don't yet have a full understanding of the Kamailio/Freeswitch
interaction, I don't know whether this will cause other issues?
Thanks in advance
Petarr
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
2013
days inactive
2013
days old
8 comments
2 participants
participants (2)
-
David Villasmil -
Petarr Jones