7 Dec
2006
7 Dec
'06
10:21 p.m.
Hello all,
Trying to debug a problem in regards to Caller IDs not being showed
through our PSTN gateway. Not sure if this is an issue with the ser or
with the mediant 2000 gateway or somewhere else but any help to this
issue would be great. I am new to this and we are trying to solve this
problem, basically one of our boxes isn't providing caller ID to the
PSTN network when users are calling. Basically they will show up as
"private number" when calls are initiated from inside and terminating on
the PSTN networking, when they are terminating inside the ser itself the
caller ID shows up with no problem, but not on the outside. We wish to
have the ability to show private numbers and to show public numbers, but
as far as it goes right now everyone is supposed to have public numbers.
Where might the problem be?
Any help would be great
Thanks
Nick
8 Dec
8 Dec
2:42 p.m.
Hi nick,
From Mediant 2000, STATUS & DIAGNOSTICS, Go to
Message LOG and check any
call to understand that you are sending CLI or not.
INVITE sip:03224284141@domain.com;user=phone SIP/2.0
Via: SIP/2.0/UDP 84.51.43.60;branch=z9hG4bKac1669285176
Max-Forwards: 70
From: <sip:902124102525@yourdomain.com>;tag=1c1669277115
To: <sip:03224284141@yourdomain.com;user=phone>
Call-ID: 1669276299121200075944(a)84.51.43.60
CSeq: 1 INVITE
Contact: <sip:902124102525@10.10.43.60>
Supported: em,100rel,timer,replaces,path
Allow:
REGISTER,OPTIONS,INVITE,ACK,CANCEL,BYE,NOTIFY,PRACK,REFER,INFO,SUBSCRIBE,UPDATE
User-Agent: Audiocodes-Sip-Gateway-Mediant 2000/v.4.60A.025
Content-Type: application/sdp
Content-Length: 275
v=0
o=AudiocodesGW 1669253469 1669253048 IN IP4 10.10.43.60
s=Phone-Call
c=IN IP4 10.10.43.60
t=0 0
m=audio 6270 RTP/AVP 18 0 96
a=rtpmap:18 g729/8000
a=fmtp:18 annexb=no
a=rtpmap:0 pcmu/8000
a=rtpmap:96 telephone-event/8000
a=fmtp:96 0-15
a=ptime:20
a=sendrecv
And then you can capture packets that sending from openser to pstn
gateway.And see there is CLI or not.
Hakan.
----- Original Message -----
From: "Nick De Cristofaro" <nickdc(a)link2exchange.com>
To: <users(a)openser.org>
Sent: Thursday, December 07, 2006 10:21 PM
Subject: [Users] Mediant 2000 and SER, caller ID issue
Hello all,
Trying to debug a problem in regards to Caller IDs not being showed
through our PSTN gateway. Not sure if this is an issue with the ser or
with the mediant 2000 gateway or somewhere else but any help to this
issue would be great. I am new to this and we are trying to solve this
problem, basically one of our boxes isn't providing caller ID to the
PSTN network when users are calling. Basically they will show up as
"private number" when calls are initiated from inside and terminating on
the PSTN networking, when they are terminating inside the ser itself the
caller ID shows up with no problem, but not on the outside. We wish to
have the ability to show private numbers and to show public numbers, but
as far as it goes right now everyone is supposed to have public numbers.
Where might the problem be?
Any help would be great
Thanks
Nick
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
7:24 p.m.
Hi Nick,
are you using RPID or PAI headers to pass the caller id info to the GW?
maybe they expect such a header in order to push the caller info on the
PSTN side.
regards,
bogdan
Nick De Cristofaro wrote:
Hello all,
Trying to debug a problem in regards to Caller IDs not being showed
through our PSTN gateway. Not sure if this is an issue with the ser or
with the mediant 2000 gateway or somewhere else but any help to this
issue would be great. I am new to this and we are trying to solve this
problem, basically one of our boxes isn't providing caller ID to the
PSTN network when users are calling. Basically they will show up as
"private number" when calls are initiated from inside and terminating on
the PSTN networking, when they are terminating inside the ser itself the
caller ID shows up with no problem, but not on the outside. We wish to
have the ability to show private numbers and to show public numbers, but
as far as it goes right now everyone is supposed to have public numbers.
Where might the problem be?
Any help would be great
Thanks
Nick
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11 Dec
11 Dec
11:38 a.m.
Hi,
on your gateway, are the Presentation Indicator and the Screening
Indicator set correctly?
(respectively set to "Allowed" and "Network-provided")
Stefano
Nick De Cristofaro ha scritto:
Hello all,
Trying to debug a problem in regards to Caller IDs not being showed
through our PSTN gateway. Not sure if this is an issue with the ser or
with the mediant 2000 gateway or somewhere else but any help to this
issue would be great. I am new to this and we are trying to solve this
problem, basically one of our boxes isn't providing caller ID to the
PSTN network when users are calling. Basically they will show up as
"private number" when calls are initiated from inside and terminating on
the PSTN networking, when they are terminating inside the ser itself the
caller ID shows up with no problem, but not on the outside. We wish to
have the ability to show private numbers and to show public numbers, but
as far as it goes right now everyone is supposed to have public numbers.
Where might the problem be?
Any help would be great
Thanks
Nick
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6556
days inactive
6560
days old
3 comments
4 participants
participants (4)
-
Bogdan-Andrei Iancu -
Hakan YASTI -
Nick De Cristofaro -
Stefano Capitanio