Hello everyone,
I'm working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I'm routing it to B-Party.
I'm facing an issue , when I'm getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
Hi,
It should be possible with freeswitch as well, google for freeswitch cause code substitution and you will see example.
Regards,
Arsen Semionov www.eurolan.info cell: +442035198881
On Thu, Mar 29, 2018 at 6:44 PM, Ali Taher ataher@vanrise.com wrote:
Hello everyone,
I’m working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I’m routing it to B-Party.
I’m facing an issue , when I’m getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi Arsen,
I know that such thing can be done through freeswitch , but I need to do it using Kamailio for specific reason.
Regards,
Ali Taher
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Arsen Sent: Thursday, March 29, 2018 6:49 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] 180 and 183 SIP messages
Hi,
It should be possible with freeswitch as well, google for freeswitch cause code substitution and you will see example.
Regards,
Arsen Semionov
www.eurolan.info http://www.eurolan.info
cell: +442035198881
On Thu, Mar 29, 2018 at 6:44 PM, Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com > wrote:
Hello everyone,
I’m working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I’m routing it to B-Party.
I’m facing an issue , when I’m getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
yes, I didn't pay attention that it's provisional response, so probably FS substitution will not be much help here
Regards, Arsen.
On Thu, Mar 29, 2018 at 6:56 PM, Ali Taher ataher@vanrise.com wrote:
Hi Arsen,
I know that such thing can be done through freeswitch , but I need to do it using Kamailio for specific reason.
Regards,
Ali Taher
*From:* sr-users [mailto:sr-users-bounces@lists.kamailio.org] *On Behalf Of *Arsen *Sent:* Thursday, March 29, 2018 6:49 PM *To:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re: [SR-Users] 180 and 183 SIP messages
Hi,
It should be possible with freeswitch as well, google for freeswitch cause code substitution and you will see example.
Regards,
Arsen Semionov
www.eurolan.info
cell: +442035198881 <+44%2020%203519%208881>
On Thu, Mar 29, 2018 at 6:44 PM, Ali Taher ataher@vanrise.com wrote:
Hello everyone,
I’m working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I’m routing it to B-Party.
I’m facing an issue , when I’m getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
You can absolutely do it:
https://kamailio.org/docs/modules/5.1.x/modules/textopsx.html#textopsx.f.cha...
You can even remove the embedded SDP if desired, using the various textops functions:
https://kamailio.org/docs/modules/5.1.x/modules/textops.html
Whether you _should_ do this just because you _can_, on the other hand, is a question I would consider very carefully.
On Thu, Mar 29, 2018 at 06:56:52PM +0300, Ali Taher wrote:
Hi Arsen,
I know that such thing can be done through freeswitch , but I need to do it using Kamailio for specific reason.
Regards,
Ali Taher
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Arsen Sent: Thursday, March 29, 2018 6:49 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] 180 and 183 SIP messages
Hi,
It should be possible with freeswitch as well, google for freeswitch cause code substitution and you will see example.
Regards,
Arsen Semionov
www.eurolan.info http://www.eurolan.info
cell: +442035198881
On Thu, Mar 29, 2018 at 6:44 PM, Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com > wrote:
Hello everyone,
I’m working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I’m routing it to B-Party.
I’m facing an issue , when I’m getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Thank you Alex for your response.
So if I want to add a header to the INVITE packet , and also detect if the message is 183 and then change it to 180 then forward it back , does is do the job :
route{ if (is_method("INVITE")) { append_hf("Test: this is a test"); } forward(127.0.0.1,5060); } reply_route { if (status == "183") { change_reply_status(180, "Ringing"); exit; } }
Regards, Ali Taher -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Alex Balashov Sent: Thursday, March 29, 2018 9:02 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] 180 and 183 SIP messages
You can absolutely do it:
https://kamailio.org/docs/modules/5.1.x/modules/textopsx.html#textopsx.f.cha...
You can even remove the embedded SDP if desired, using the various textops functions:
https://kamailio.org/docs/modules/5.1.x/modules/textops.html
Whether you _should_ do this just because you _can_, on the other hand, is a question I would consider very carefully.
On Thu, Mar 29, 2018 at 06:56:52PM +0300, Ali Taher wrote:
Hi Arsen,
I know that such thing can be done through freeswitch , but I need to do it using Kamailio for specific reason.
Regards,
Ali Taher
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Arsen Sent: Thursday, March 29, 2018 6:49 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] 180 and 183 SIP messages
Hi,
It should be possible with freeswitch as well, google for freeswitch cause code substitution and you will see example.
Regards,
Arsen Semionov
www.eurolan.info http://www.eurolan.info
cell: +442035198881
On Thu, Mar 29, 2018 at 6:44 PM, Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com > wrote:
Hello everyone,
I’m working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I’m routing it to B-Party.
I’m facing an issue , when I’m getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello,
As I understand now , append_hf function must be called from either REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE or BRANCH_ROUTE.
I'm not sure if this what I need in my case , where I want to insert a new header to the INVITE packet then forward it .
Any help would be appreciated.
Regards, Ali Taher
-----Original Message----- From: Ali Taher [mailto:ataher@vanrise.com] Sent: Friday, March 30, 2018 10:02 AM To: 'Kamailio (SER) - Users Mailing List' sr-users@lists.kamailio.org Cc: 'Ali Taher~Vanrise Technical Support' ataher@vanrise.com Subject: RE: [SR-Users] 180 and 183 SIP messages
Thank you Alex for your response.
So if I want to add a header to the INVITE packet , and also detect if the message is 183 and then change it to 180 then forward it back , does is do the job :
route{ if (is_method("INVITE")) { append_hf("Test: this is a test"); } forward(127.0.0.1,5060); } reply_route { if (status == "183") { change_reply_status(180, "Ringing"); exit; } }
Regards, Ali Taher -----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Alex Balashov Sent: Thursday, March 29, 2018 9:02 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] 180 and 183 SIP messages
You can absolutely do it:
https://kamailio.org/docs/modules/5.1.x/modules/textopsx.html#textopsx.f.cha...
You can even remove the embedded SDP if desired, using the various textops functions:
https://kamailio.org/docs/modules/5.1.x/modules/textops.html
Whether you _should_ do this just because you _can_, on the other hand, is a question I would consider very carefully.
On Thu, Mar 29, 2018 at 06:56:52PM +0300, Ali Taher wrote:
Hi Arsen,
I know that such thing can be done through freeswitch , but I need to do it using Kamailio for specific reason.
Regards,
Ali Taher
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Arsen Sent: Thursday, March 29, 2018 6:49 PM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re: [SR-Users] 180 and 183 SIP messages
Hi,
It should be possible with freeswitch as well, google for freeswitch cause code substitution and you will see example.
Regards,
Arsen Semionov
www.eurolan.info http://www.eurolan.info
cell: +442035198881
On Thu, Mar 29, 2018 at 6:44 PM, Ali Taher <ataher@vanrise.com mailto:ataher@vanrise.com > wrote:
Hello everyone,
I’m working on freeswitch , where I have SIP calls coming from A-Party to my freeswitch and I’m routing it to B-Party.
I’m facing an issue , when I’m getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
Regards,
Ali Taher
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
On Thu, Mar 29, 2018 at 06:44:01PM +0300, Ali Taher wrote:
I'm facing an issue , when I'm getting back the 183 message from the supplier(B-Party) and forwarding it to the customer(A-Party); the customer is not hearing the RBT and asking to send 180 rather than 183 . (the supplier is only sending 183 without 180).
Is it possible using kamailio to replace this 183 message with 180 message , or even add 180 message while keeping the same 183 message ?
See https://lists.kamailio.org/pipermail/sr-users/2018-February/100413.html
-
Alex Balashov -
Ali Taher -
Arsen -
Daniel Tryba