Hello Klaus, Thanks for your reply I am using radiusclient-ng 0.5.2 from berlios.But there is no line in "/usr/local/radiusclient-ng-0.5.2/etc/dictionay" file containing SIP-AVP, please tell me where should i move furthur.I am following "SER and Radius How to" document by iptel.org. But I hope that is not applicable to openser. Regards Lokesh

----- Original Message ----- From: "Klaus Darilion" klaus.mailinglists@pernau.at To: "Lokesh Kumar" lokesh@interacesso.pt Cc: users@openser.org Sent: Monday, November 21, 2005 8:34 PM Subject: Re: [Serdev] Please help problem with AUTH with radius....using openser-1.0.9

Hi Lokesh!

A small debugging workshop:

1. Watch the lines with "error" in it:

==> 0(0) ERROR: auth_radius: can't get code for the SIP-AVP attribute

2. Seems like the SIP-AVP attribute is unknown to the radius client. Are

you using the proper radius dictionary? There must be line with "SIP-AVP" in it.

regards klaus

Lokesh Kumar wrote:

...

Hello Friends,

I had installed openser-1.0.9, and enabled radius accounting in my openser.cfg file. But I am getting errors mentioned below. and my openser crashed without running. I am unable to find out whats the reason. No posts available relating to this matter also. Please help me.........

0(6348) shm_mem_init: success

0(0) core dump limits set to 4294967295

0(0) DEBUG: init_mod: sl_module

stateless - initializing

0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered

0(0) unixsock_register_cmd: New command (sl_stats) registered

0(0) DEBUG: MD5 calculated: 329cfeaa6ded039da25ff8cbb8668bd2

0(0) DEBUG: init_mod: tm

0(0) TM - (size of cell=2832, sip_msg=768) initializing...

0(0) Call-ID initialization: '3f69f754'

0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered

0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered

0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered

0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered

0(0) unixsock_register_cmd: New command (t_uac_dlg) registered

0(0) unixsock_register_cmd: New command (t_uac_cancel) registered

0(0) unixsock_register_cmd: New command (t_hash) registered

0(0) unixsock_register_cmd: New command (t_reply) registered

0(0) DEBUG: lock_initialize: lock initialization started

0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered

0(0) unixsock_register_cmd: New command (t_stats) registered

0(0) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed

0(0) DEBUG: MD5 calculated: fa997f81440371de71ab448ebdb9af56

0(0) DEBUG: init_mod: rr

0(0) rr - initializing

0(0) DEBUG: init_mod: maxfwd

0(0) Maxfwd module- initializing

0(0) DEBUG: init_mod: usrloc

0(0) usrloc - initializing

0(0) DEBUG: register_fifo_cmd: new command (ul_stats) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_rm) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_dump) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_flush) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_add) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered

0(0) unixsock_register_cmd: New command (ul_stats) registered

0(0) unixsock_register_cmd: New command (ul_rm) registered

0(0) unixsock_register_cmd: New command (ul_rm_contact) registered

0(0) unixsock_register_cmd: New command (ul_dump) registered

0(0) unixsock_register_cmd: New command (ul_flush) registered

0(0) unixsock_register_cmd: New command (ul_add) registered

0(0) unixsock_register_cmd: New command (ul_show_contact) registered

0(0) DEBUG: init_mod: registrar

0(0) registrar - initializing

0(0) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/openser/modules/sl.so]

0(0) find_export: found <ul_bind_usrloc> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_register_udomain> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_get_all_ucontacts> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_insert_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_delete_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_get_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_lock_udomain> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_unlock_udomain> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_release_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_insert_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_delete_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_get_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_update_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_register_watcher> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_unregister_watcher> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_register_ulcb> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) DEBUG: init_mod: textops

textops - initializing

0(0) DEBUG: init_mod: auth

0(0) AUTH module - initializing

0(0) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/openser/modules/sl.so]

0(0) DEBUG: init_mod: auth_radius

0(0) auth_radius - Initializing

0(0) auth_radius: No `Cisco' vendor in Radius dictionary

0(0) find_export: found <bind_auth> in module auth [/usr/local/lib/openser/modules/auth.so]

0(0) ERROR: auth_radius: can't get code for the SIP-AVP attribute

0(0) init_mod(): Error while initializing module auth_radius

ERROR: error while initializing modules

0(0) DEBUG: tm_shutdown : start

0(0) DEBUG: unlink_timer_lists : emptying DELETE list

0(0) DEBUG: tm_shutdown : emptying hash table

0(0) DEBUG: tm_shutdown : releasing timers

0(0) DEBUG: tm_shutdown : removing semaphores

0(0) DEBUG: tm_shutdown : destroying tmcb lists

0(0) DEBUG: tm_shutdown : done

0(6348) shm_mem_destroy

0(6348) destroying the shared memory lock

[root@ser init.d]#

Thanks you very much

Lokesh

---

---

Serdev mailing list Serdev@iptel.org http://mail.iptel.org/mailman/listinfo/serdev

There is a dictionary file included with openser. It should be in the same directory as openser.cfg. Use this one.

When I use radius I do: 1. copy the default radiusclient.conf file (e.g. /etc/radiusclient-ng/radiusclient.conf) into the openser config directory:

cp /etc/radiusclient-ng/radiusclient.conf /etc/openser/

2. copy the default server file to openser config directory

cp /etc/radiusclient-ng/servers /etc/openser/radius-servers

3. add you radius server and the secret to /etc/openser/radius-servers

4. edit /etc/openser/radiusclient.conf to: - use the dictionary /etc/openser/dictionary - use the servers in /etc/openser/radius-servers

5. configure /etc/openser/openser.cfg to use proper radiusclient.conf file:

# -- radius configuration -- modparam("auth_radius", "radius_config", "/etc/openser/radiusclient.conf")

It is a good practice to do not use the configuration files in the radiusclient_ng directory. Thus way you can have several servers using the radiusclient-ng with different settings.

regards klaus

Lokesh Kumar wrote:

Hello Klaus, Thanks for your reply I am using radiusclient-ng 0.5.2 from berlios.But there is no line in "/usr/local/radiusclient-ng-0.5.2/etc/dictionay" file containing SIP-AVP, please tell me where should i move furthur.I am following "SER and Radius How to" document by iptel.org. But I hope that is not applicable to openser. Regards Lokesh

----- Original Message ----- From: "Klaus Darilion" klaus.mailinglists@pernau.at To: "Lokesh Kumar" lokesh@interacesso.pt Cc: users@openser.org Sent: Monday, November 21, 2005 8:34 PM Subject: Re: [Serdev] Please help problem with AUTH with radius....using openser-1.0.9

...

Hi Lokesh!

A small debugging workshop:

1. Watch the lines with "error" in it:

==> 0(0) ERROR: auth_radius: can't get code for the SIP-AVP attribute

2. Seems like the SIP-AVP attribute is unknown to the radius client. Are

you using the proper radius dictionary? There must be line with "SIP-AVP" in it.

regards klaus

Lokesh Kumar wrote:

...

Hello Friends,

I had installed openser-1.0.9, and enabled radius accounting in my openser.cfg file. But I am getting errors mentioned below. and my openser crashed without running. I am unable to find out whats the reason. No posts available relating to this matter also. Please help me.........

0(6348) shm_mem_init: success

0(0) core dump limits set to 4294967295

0(0) DEBUG: init_mod: sl_module

stateless - initializing

0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered

0(0) unixsock_register_cmd: New command (sl_stats) registered

0(0) DEBUG: MD5 calculated: 329cfeaa6ded039da25ff8cbb8668bd2

0(0) DEBUG: init_mod: tm

0(0) TM - (size of cell=2832, sip_msg=768) initializing...

0(0) Call-ID initialization: '3f69f754'

0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered

0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered

0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered

0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered

0(0) unixsock_register_cmd: New command (t_uac_dlg) registered

0(0) unixsock_register_cmd: New command (t_uac_cancel) registered

0(0) unixsock_register_cmd: New command (t_hash) registered

0(0) unixsock_register_cmd: New command (t_reply) registered

0(0) DEBUG: lock_initialize: lock initialization started

0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered

0(0) unixsock_register_cmd: New command (t_stats) registered

0(0) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed

0(0) DEBUG: MD5 calculated: fa997f81440371de71ab448ebdb9af56

0(0) DEBUG: init_mod: rr

0(0) rr - initializing

0(0) DEBUG: init_mod: maxfwd

0(0) Maxfwd module- initializing

0(0) DEBUG: init_mod: usrloc

0(0) usrloc - initializing

0(0) DEBUG: register_fifo_cmd: new command (ul_stats) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_rm) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_dump) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_flush) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_add) registered

0(0) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered

0(0) unixsock_register_cmd: New command (ul_stats) registered

0(0) unixsock_register_cmd: New command (ul_rm) registered

0(0) unixsock_register_cmd: New command (ul_rm_contact) registered

0(0) unixsock_register_cmd: New command (ul_dump) registered

0(0) unixsock_register_cmd: New command (ul_flush) registered

0(0) unixsock_register_cmd: New command (ul_add) registered

0(0) unixsock_register_cmd: New command (ul_show_contact) registered

0(0) DEBUG: init_mod: registrar

0(0) registrar - initializing

0(0) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/openser/modules/sl.so]

0(0) find_export: found <ul_bind_usrloc> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_register_udomain> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_get_all_ucontacts> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_insert_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_delete_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_get_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_lock_udomain> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_unlock_udomain> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_release_urecord> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_insert_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_delete_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_get_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_update_ucontact> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_register_watcher> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_unregister_watcher> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) find_export: found <ul_register_ulcb> in module usrloc [/usr/local/lib/openser/modules/usrloc.so]

0(0) DEBUG: init_mod: textops

textops - initializing

0(0) DEBUG: init_mod: auth

0(0) AUTH module - initializing

0(0) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/openser/modules/sl.so]

0(0) DEBUG: init_mod: auth_radius

0(0) auth_radius - Initializing

0(0) auth_radius: No `Cisco' vendor in Radius dictionary

0(0) find_export: found <bind_auth> in module auth [/usr/local/lib/openser/modules/auth.so]

0(0) ERROR: auth_radius: can't get code for the SIP-AVP attribute

0(0) init_mod(): Error while initializing module auth_radius

ERROR: error while initializing modules

0(0) DEBUG: tm_shutdown : start

0(0) DEBUG: unlink_timer_lists : emptying DELETE list

0(0) DEBUG: tm_shutdown : emptying hash table

0(0) DEBUG: tm_shutdown : releasing timers

0(0) DEBUG: tm_shutdown : removing semaphores

0(0) DEBUG: tm_shutdown : destroying tmcb lists

0(0) DEBUG: tm_shutdown : done

0(6348) shm_mem_destroy

0(6348) destroying the shared memory lock

[root@ser init.d]#

Thanks you very much

Lokesh

---

---

Serdev mailing list Serdev@iptel.org http://mail.iptel.org/mailman/listinfo/serdev