Hi Tomasz,
well it could be that reusing an existing config and commiting than your specific changes to it would save you quite some laborous exercises rather than writing it from scratch.... http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?rev...
The lines in question are (out of which I think you are missing the registrar params)
FLAG_NAT : 3, # the UAC is behind a NAT
... # identify natted contacts using a flag modparam("registrar", "load_nat_flag", "FLAG_NAT") modparam("registrar", "save_nat_flag", "FLAG_NAT") ... modparam("rr", "cookie_filter", "(account|uac_nat)") ... modparam("nathelper", "ping_nated_only", 1 ) # if this option is not set, simple 4-bytes ping is sent modparam("nathelper", "natping_method", "OPTIONS" ) #temporary statefull natping test (only in future versions) #modparam("nathelper", "natping_stateful", 1) ...
setflag(FLAG_NAT);
-jiri
At 22:20 24/11/2007, Tomasz Zieleniewski wrote:
I'm sorry for the CC here is my config:
debug=3 # debug level (cmd line: -dddddddddd) memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes log_stderror=no check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 tls_port_no=5061 children=4 user=ser group=ser mhomed=yes disable_tcp=no tcp_accept_aliases=yes enable_tls=no sip_warning=0 reply_to_via=no alias="voip.touk.pl"
dns_retr_time=1 dns_retr_no=1 dns_servers_no=1 dns_use_search_list=no dns_try_ipv6=no # dns cache & failover use_dns_cache=on use_dns_failover=on # dns_cache_flags=0 dns_cache_negative_ttl=300 dns_cache_min_ttl=60 dns_cache_max_ttl=86400 # 1 day dns_cache_mem=2048 # 2 MB dns_cache_gc_interval=60
tcp_connection_lifetime=3600 tcp_max_connections=2048 tcp_connect_timeout=1
loadmodule ... ....
# specify the path to you database here modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr", "db_url", "mysql://ser:ser@localhost/ser")
# -- usrloc params -- modparam("usrloc", "db_mode", 1)
# -- registrar params -- modparam("registrar", "default_expires", 300) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 300) modparam("registrar", "append_branches", 1) modparam("registrar", "received_param", "rcv") modparam("registrar", "max_contacts", 2)
# -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password")
# -- rr params -- modparam("rr", "enable_full_lr", 1) modparam("rr", "cookie_filter", "uac_nat") modparam("rr", "cookie_secret", "secret") modparam("rr", "user_part_avp", "route_user") modparam("rr", "next_route_avp", "route_next")
# -- gflags params -- modparam("gflags", "load_global_attrs", 1)
# -- domain params -- modparam("domain", "load_domain_attrs", 1)
# -- ctl params -- modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl") modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo") # modparam("ctl", "binrpc", "tcp:localhost:2046") modparam("ctl", "mode", 0777)
# -- tm params -- modparam("tm", "restart_fr_on_each_reply", 1)
# -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15)
# -- options params -- modparam("options", "accept", "*/*") modparam("options", "accept_encoding", "") modparam("options", "accept_language", "en")
# -- ratelimit params -- modparam("ratelimit","timer_interval", 10) modparam("ratelimit","invite_limit", 100) modparam("ratelimit","register_limit", 100) modparam("ratelimit","subscribe_limit", 100)
# -- xmlrpc params -- modparam("xmlrpc", "route","RPC")
# -- nathelper params -- modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
# -- tls params -- modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg") modparam("tls", "tls_force_run", 0) modparam("tls", "tls_log",3) modparam("tls", "handshake_timeout", 10) modparam("tls", "send_timeout", 10) modparam("tls", "tls_disable_compression", 0) #modparam("tls", "private_key", "/etc/certs/key.pem") #modparam("tls", "certificate", "/etc/certs/cert.pem") #modparam("tls", "ca_list", "/etc/certs/ca_list.pem") #modparam("tls", "require_certificate", 0) #modparam("tls", "verify_certificate", 1) #modparam("tls", "tls_method", "TLSv1")
route{ ... }
On Nov 24, 2007 9:35 PM, Atle Samuelsen clona@cyberhouse.no wrote:
Hi,
Always CC the list.
then I dont know.. post your full config so people can see if they see something -A
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 20:38]:
Hi,
I had that parameter set to 0, but still no udp packets...
On Nov 24, 2007 6:43 PM, Atle Samuelsen clona@cyberhouse.no wrote:
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 16:50]:
HI,
I have the following nathelper settings: modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
But i cant see any udp packets being sent to registered users. Please point me what did I miss.
Hi,
without seeing any more of your config, I'm guessing that you do not set the natflag, so if you change ping_nated_only to 0, I think you will see some udp packets.
- Atle
(shot in the whild world of sip)
Best Tomasz _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Jiri Kuthan http://iptel.org/~jiri/
Hi,
I don't have those lines because I have a registrar on seperate SIP Proxy. This proxy here is the boundary one, but they both use the same database and have access to location table common.
-tomasz
On Nov 25, 2007 10:40 AM, Jiri Kuthan jiri@iptel.org wrote:
Hi Tomasz,
well it could be that reusing an existing config and commiting than your specific changes to it would save you quite some laborous exercises rather than writing it from scratch.... http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?rev...
The lines in question are (out of which I think you are missing the registrar params)
FLAG_NAT : 3, # the UAC is behind a NAT
... # identify natted contacts using a flag modparam("registrar", "load_nat_flag", "FLAG_NAT") modparam("registrar", "save_nat_flag", "FLAG_NAT") ... modparam("rr", "cookie_filter", "(account|uac_nat)") ... modparam("nathelper", "ping_nated_only", 1 ) # if this option is not set, simple 4-bytes ping is sent modparam("nathelper", "natping_method", "OPTIONS" ) #temporary statefull natping test (only in future versions) #modparam("nathelper", "natping_stateful", 1) ...
setflag(FLAG_NAT);-jiri
At 22:20 24/11/2007, Tomasz Zieleniewski wrote:
I'm sorry for the CC here is my config:
debug=3 # debug level (cmd line: -dddddddddd) memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes log_stderror=no check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 tls_port_no=5061 children=4 user=ser group=ser mhomed=yes disable_tcp=no tcp_accept_aliases=yes enable_tls=no sip_warning=0 reply_to_via=no alias="voip.touk.pl"
dns_retr_time=1 dns_retr_no=1 dns_servers_no=1 dns_use_search_list=no dns_try_ipv6=no # dns cache & failover use_dns_cache=on use_dns_failover=on # dns_cache_flags=0 dns_cache_negative_ttl=300 dns_cache_min_ttl=60 dns_cache_max_ttl=86400 # 1 day dns_cache_mem=2048 # 2 MB dns_cache_gc_interval=60
tcp_connection_lifetime=3600 tcp_max_connections=2048 tcp_connect_timeout=1
loadmodule ... ....
# specify the path to you database here modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr", "db_url", "mysql://ser:ser@localhost/ser")
# -- usrloc params -- modparam("usrloc", "db_mode", 1)
# -- registrar params -- modparam("registrar", "default_expires", 300) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 300) modparam("registrar", "append_branches", 1) modparam("registrar", "received_param", "rcv") modparam("registrar", "max_contacts", 2)
# -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password")
# -- rr params -- modparam("rr", "enable_full_lr", 1) modparam("rr", "cookie_filter", "uac_nat") modparam("rr", "cookie_secret", "secret") modparam("rr", "user_part_avp", "route_user") modparam("rr", "next_route_avp", "route_next")
# -- gflags params -- modparam("gflags", "load_global_attrs", 1)
# -- domain params -- modparam("domain", "load_domain_attrs", 1)
# -- ctl params -- modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl") modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo") # modparam("ctl", "binrpc", "tcp:localhost:2046") modparam("ctl", "mode", 0777)
# -- tm params -- modparam("tm", "restart_fr_on_each_reply", 1)
# -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15)
# -- options params -- modparam("options", "accept", "*/*") modparam("options", "accept_encoding", "") modparam("options", "accept_language", "en")
# -- ratelimit params -- modparam("ratelimit","timer_interval", 10) modparam("ratelimit","invite_limit", 100) modparam("ratelimit","register_limit", 100) modparam("ratelimit","subscribe_limit", 100)
# -- xmlrpc params -- modparam("xmlrpc", "route","RPC")
# -- nathelper params -- modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
# -- tls params -- modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg") modparam("tls", "tls_force_run", 0) modparam("tls", "tls_log",3) modparam("tls", "handshake_timeout", 10) modparam("tls", "send_timeout", 10) modparam("tls", "tls_disable_compression", 0) #modparam("tls", "private_key", "/etc/certs/key.pem") #modparam("tls", "certificate", "/etc/certs/cert.pem") #modparam("tls", "ca_list", "/etc/certs/ca_list.pem") #modparam("tls", "require_certificate", 0) #modparam("tls", "verify_certificate", 1) #modparam("tls", "tls_method", "TLSv1")
route{ ... }
On Nov 24, 2007 9:35 PM, Atle Samuelsen clona@cyberhouse.no wrote:
Hi,
Always CC the list.
then I dont know.. post your full config so people can see if they see something -A
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 20:38]:
Hi,
I had that parameter set to 0, but still no udp packets...
On Nov 24, 2007 6:43 PM, Atle Samuelsen clona@cyberhouse.no wrote:
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 16:50]:
HI,
I have the following nathelper settings: modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
But i cant see any udp packets being sent to registered users. Please point me what did I miss.
Hi,
without seeing any more of your config, I'm guessing that you do not set the natflag, so if you change ping_nated_only to 0, I think you will see some udp packets.
- Atle
(shot in the whild world of sip)
Best Tomasz _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Jiri Kuthan http://iptel.org/~jiri/
-
Jiri Kuthan -
Tomasz Zieleniewski