I get the following error sometimes..
May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a branch
I read it was because the destination set has to be increased. I have to check configur.h file but where is it? I can't find it. I only found in ser.cfg childre=4
Giuseppe
It seems that the destination user has a lot of contact addresses in the location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase MAX_BRANCHES value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote:
I get the following error sometimes..
May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a branch
I read it was because the destination set has to be increased. I have to check configur.h file but where is it? I can't find it. I only found in ser.cfg childre=4
Giuseppe
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to understand it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
It seems that the destination user has a lot of contact addresses in the location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase MAX_BRANCHES value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote:
I get the following error sometimes.. May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a branch I read it was because the destination set has to be increased. I have to check configur.h file but where is it? I can't find it. I only found in ser.cfg childre=4 Giuseppe
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
Sorry for the news, but to make it work, You would have to compile SER from the scratch... ;) The config.h file is on the sources...
Edson.
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 13:15 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to understand it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
It seems that the destination user has a lot of contact addresses in the location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase MAX_BRANCHES value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote:
I get the following error sometimes.. May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a
branch
I read it was because the destination set has to be increased. I have
to
check configur.h file but where is it? I can't find it. I only found in ser.cfg childre=4 Giuseppe
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
you have any easy guite to install it? I'm using Fedora Core 5
Giuseppe
----- Original Message ----- From: "Edson" 4lists@gmail.com To: users@openser.org Sent: Thursday, May 04, 2006 6:23 PM Subject: RE: [Users] ERROR: append_branch: max nr of branches exceeded
Sorry for the news, but to make it work, You would have to compile SER from the scratch... ;) The config.h file is on the sources...
Edson.
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 13:15 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to understand it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
It seems that the destination user has a lot of contact addresses in the location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase MAX_BRANCHES value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote:
I get the following error sometimes.. May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a
branch
I read it was because the destination set has to be increased. I have
to
check configur.h file but where is it? I can't find it. I only found in ser.cfg childre=4 Giuseppe
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
this should help a bit:
http://openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_from_cv...
Cheers, Daniel
On 05/04/2006 07:46 PM, Giuseppe Parlato wrote:
you have any easy guite to install it? I'm using Fedora Core 5
Giuseppe
----- Original Message ----- From: "Edson" 4lists@gmail.com To: users@openser.org Sent: Thursday, May 04, 2006 6:23 PM Subject: RE: [Users] ERROR: append_branch: max nr of branches exceeded
Sorry for the news, but to make it work, You would have to compile SER from the scratch... ;) The config.h file is on the sources...
Edson.
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 13:15 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to understand it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
It seems that the destination user has a lot of contact addresses
in > the
location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase MAX_BRANCHES value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote:
I get the following error sometimes.. May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a
branch
I read it was because the destination set has to be increased. I
have to
check configur.h file but where is it? I can't find it. I only
found >> in
ser.cfg childre=4 Giuseppe
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
THANKS, the last question for now.. how can I find out what ser version is installed?
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: "Edson" 4lists@gmail.com; users@openser.org Sent: Thursday, May 04, 2006 6:49 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
this should help a bit:
http://openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_from_cv...
Cheers, Daniel
On 05/04/2006 07:46 PM, Giuseppe Parlato wrote:
you have any easy guite to install it? I'm using Fedora Core 5
Giuseppe
----- Original Message ----- From: "Edson" 4lists@gmail.com To: users@openser.org Sent: Thursday, May 04, 2006 6:23 PM Subject: RE: [Users] ERROR: append_branch: max nr of branches exceeded
Sorry for the news, but to make it work, You would have to compile SER from the scratch... ;) The config.h file is on the sources...
Edson.
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 13:15 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to understand it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
It seems that the destination user has a lot of contact addresses
in > the
location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase MAX_BRANCHES value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote:
I get the following error sometimes.. May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of branches exceeded May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a
branch
I read it was because the destination set has to be increased. I
have to
check configur.h file but where is it? I can't find it. I only
found >> in
ser.cfg childre=4 Giuseppe
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
'openser -h' talks a lot.... ;)
Edson
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 14:00 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
THANKS, the last question for now.. how can I find out what ser version is installed?
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: "Edson" 4lists@gmail.com; users@openser.org Sent: Thursday, May 04, 2006 6:49 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
this should help a bit:
http://openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_from_ cvs
Cheers, Daniel
On 05/04/2006 07:46 PM, Giuseppe Parlato wrote:
you have any easy guite to install it? I'm using Fedora Core 5
Giuseppe
----- Original Message ----- From: "Edson" 4lists@gmail.com To: users@openser.org Sent: Thursday, May 04, 2006 6:23 PM Subject: RE: [Users] ERROR: append_branch: max nr of branches exceeded
Sorry for the news, but to make it work, You would have to compile SER from the scratch... ;) The config.h file is on the sources...
Edson.
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 13:15 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches
exceeded
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to
understand
it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches
exceeded
It seems that the destination user has a lot of contact addresses
in > the
location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase
MAX_BRANCHES
value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote: > I get the following error sometimes.. > May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of > branches exceeded > May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a
branch
> I read it was because the destination set has to be increased. I
have to
> check configur.h file but where is it? I can't find it. I only
found >> in
> ser.cfg childre=4 > Giuseppe >
--
> > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
openser -h reveals openser -V
regards klaus
On Thu, May 4, 2006 18:59, Giuseppe Parlato said:
THANKS, the last question for now.. how can I find out what ser version is installed?
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: "Edson" 4lists@gmail.com; users@openser.org Sent: Thursday, May 04, 2006 6:49 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
this should help a bit:
http://openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_from_cv...
Cheers, Daniel
On 05/04/2006 07:46 PM, Giuseppe Parlato wrote:
you have any easy guite to install it? I'm using Fedora Core 5
Giuseppe
----- Original Message ----- From: "Edson" 4lists@gmail.com To: users@openser.org Sent: Thursday, May 04, 2006 6:23 PM Subject: RE: [Users] ERROR: append_branch: max nr of branches exceeded
Sorry for the news, but to make it work, You would have to compile SER from the scratch... ;) The config.h file is on the sources...
Edson.
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Giuseppe Parlato Sent: quinta-feira, 4 de maio de 2006 13:15 To: daniel@voice-system.ro Cc: users@openser.org Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
sorry but config.h is it a file? if so where is it? I've never installe ser and so I have to work with a already installed ser trying to understand it.
thanks
Giuseppe
----- Original Message ----- From: "Daniel-Constantin Mierla" daniel@voice-system.ro To: "Giuseppe Parlato" gparlato@tnet.it Cc: users@openser.org Sent: Thursday, May 04, 2006 5:15 PM Subject: Re: [Users] ERROR: append_branch: max nr of branches exceeded
It seems that the destination user has a lot of contact addresses
in > the
location table, or there were a lot of redirects (serial/parallel forking). You have to compile openser after you increase
MAX_BRANCHES
value in sip-server/config.h
The default value is 24, just look for the next line in sip-server/config.h
#define MAX_BRANCHES 24
Cheers, Daniel
On 05/04/2006 05:05 PM, Giuseppe Parlato wrote: > I get the following error sometimes.. > May 4 11:53:35 dns2 ser[28473]: ERROR: append_branch: max nr of > branches exceeded > May 4 11:53:35 dns2 ser[28473]: lookup(): Error while appending a
branch
> I read it was because the destination set has to be increased. I
have to
> check configur.h file but where is it? I can't find it. I only
found >> in
> ser.cfg childre=4 > Giuseppe >
> > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date:
03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 03/05/2006
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Daniel-Constantin Mierla -
Edson -
Giuseppe Parlato -
Klaus Darilion