1 Oct
2011
1 Oct
'11
9:45 p.m.
Alternately, if you dislike any of these paradigms or find the order of operations
inconvenient, just roll your own. That's what sqlops is for.
--
This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors,
and general sloppiness.
Alex Balashov - Principal
Evariste Systems LLC
260 Peachtree Street NW
Suite 2200
Atlanta, GA 30303
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
On Oct 1, 2011, at 10:43 AM, "graham(a)g-rock.net" <graham(a)g-rock.net>
wrote:
I know I am Auth'ing users, but apparently need to
confirm the location of www_authorize. Thanks for the pointers Alex.
Sent from my HTC on the Now Network from Sprint!
----- Reply message -----
From: "Alex Balashov" <abalashov(a)evaristesys.com>
Date: Sat, Oct 1, 2011 9:07 am
Subject: [SR-Users] Setting avp from load_credentials
To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing
List" <sr-users(a)lists.sip-router.org>
Sure it is, but credentials only get loaded if you are doing proxy/www_authorize()
beforehand. Are you?
--
This message was painstakingly thumbed out on my mobile, so apologies for brevity,
errors, and general sloppiness.
Alex Balashov - Principal
Evariste Systems LLC
260 Peachtree Street NW
Suite 2200
Atlanta, GA 30303
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
On Oct 1, 2011, at 9:24 AM, Graham Wooden <graham(a)g-rock.net> wrote:
Hi there,
Just doing a quick test and this doesn’t appear to be working. Kamailio
1.5.5-notls. Snippet of code:
modparam("auth_db", "load_credentials", "username")
.
.
.
xlog("username is $avp(s:username)\n");
The result is '<null>'. Is this not available in the route{} ?
Thanks,
-graham
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
1 Oct
1 Oct
10:16 p.m.
New subject: Setting avp from load_credentials
I believe I have got it going down the right path now ... I have a few users
that don¹t auth, as I have them listed as static entries in the location
table as well as in the trusted table.
I was testing with one of those PBX¹s that don¹t auth, so it was throwing me
off. Since its just a few hardcoded trusted, I am doing an if/else on $si
and assigning $var(blah) that way, and everyone else has $aU assigned to
$var(blah).
ThIs all ties into my previous thread form which I am using $var(blah) on my
get_profile_size for my quota/call-limit checks for my outbound call
tracking.
$rU works across the board for the inbound.
I am now back to determine what is the best way to store the call-limit
values ... In the subscriber table as a new column or in the quota table
that I was using before.
Thank you again Alex for all the pointers; indeed the dialog module is the
best way to handle this.
-graham
On 10/1/11 1:45 PM, "Alex Balashov" <abalashov(a)evaristesys.com> wrote:
Alternately, if you dislike any of these paradigms or
find the order of
operations inconvenient, just roll your own. That's what sqlops is for.
--
This message was painstakingly thumbed out on my mobile, so apologies for
brevity, errors, and general sloppiness.
Alex Balashov - Principal
Evariste Systems LLC
260 Peachtree Street NW
Suite 2200
Atlanta, GA 30303
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/ <http://www.evaristesys.com/>
On Oct 1, 2011, at 10:43 AM, "graham(a)g-rock.net" <graham(a)g-rock.net>
wrote:
I know I am Auth'ing users, but apparently
need to confirm the location of
www_authorize. Thanks for the pointers Alex.
Sent from my HTC on the Now Network from Sprint!
----- Reply message -----
From: "Alex Balashov" <abalashov(a)evaristesys.com>
Date: Sat, Oct 1, 2011 9:07 am
Subject: [SR-Users] Setting avp from load_credentials
To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -Users
Mailing List" <sr-users(a)lists.sip-router.org>
Sure it is, but credentials only get loaded if you are doing
proxy/www_authorize() beforehand. Are you?
--
This message was painstakingly thumbed out on my mobile, so apologies for
brevity, errors, and general sloppiness.
Alex Balashov - Principal
Evariste Systems LLC
260 Peachtree Street NW
Suite 2200
Atlanta, GA 30303
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com <http://www.evaristesys.com> /
On Oct 1, 2011, at 9:24 AM, Graham Wooden <graham(a)g-rock.net> wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi
there,
Just doing a quick test and this doesn¹t appear to be working. Kamailio
1.5.5-notls. Snippet of code:
modparam("auth_db", "load_credentials", "username")
.
.
.
xlog("username is $avp(s:username)\n");
The result is '<null>'. Is this not available in the route{} ?
Thanks,
-graham
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
4801
days inactive
4801
days old
1 comments
2 participants
participants (2)
-
Alex Balashov -
Graham Wooden