8 Jun
2007
8 Jun
'07
12:46 p.m.
Hello
I'm using a Patton gateway with my Openser and everything works fine,
except when OpenSER has to redirect a call to Asterisk.
If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the
Patton gateway it doesnt work.
In the moment Im just using
rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just
want to be sure... does OpenSER needs some special configuration in
order to the redirects to work?
Thanks
Joao Pereira
--
______________________________________________
João Gomes Pereira
FCCN
Av. do Brasil, nº 101
1700-066 Lisboa
tel: +351 218 440 100 - fax: +351 218 472 167
email|SIP: joao.pereira(a)fccn.pt
http://www.fccn.pt
______________________________________________
---
8 Jun
8 Jun
5:25 p.m.
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx
messages coming from asterisk or the patton gw?
If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello
I'm using a Patton gateway with my Openser and everything works fine,
except when OpenSER has to redirect a call to Asterisk.
If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the
Patton gateway it doesnt work.
In the moment Im just using
rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just
want to be sure... does OpenSER needs some special configuration in
order to the redirects to work?
Thanks
Joao Pereira
11 Jun
11 Jun
4:43 p.m.
Hello
My question is:
Does OpenSER needs some special configuration to redirect calls? Im just
using "rewritehost" and it works with X-Lite without problems.
The problem just appeared with the Patton Gateway.... I just need to
know in which situations do I need to configure OpenSER with
"uac_redirect" module.
Thanks
regards
Joao Pereira
tele wrote:
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx
messages coming from asterisk or the patton gw?
If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello
I'm using a Patton gateway with my Openser and everything works fine,
except when OpenSER has to redirect a call to Asterisk.
If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the
Patton gateway it doesnt work.
In the moment Im just using
rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just
want to be sure... does OpenSER needs some special configuration in
order to the redirects to work?
Thanks
Joao Pereira
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
12 Jun
12 Jun
10:40 a.m.
Hi,
You use rewritehost() for route call to specific IP or host so it's
correct, the uac_redirect is a module able to handler 3xx Redirect
messages from other gw, you can also generate 3xx messages from OpenSER.
depends on your requirements.
What problem happens with the Patton GW ?
:tele
On Mon, 2007-06-11 at 14:43 +0100, Joao Pereira wrote:
Hello
My question is:
Does OpenSER needs some special configuration to redirect calls? Im just
using "rewritehost" and it works with X-Lite without problems.
The problem just appeared with the Patton Gateway.... I just need to
know in which situations do I need to configure OpenSER with
"uac_redirect" module.
Thanks
regards
Joao Pereira
tele wrote:
> Hi Joao,
>
> It's not clear want you want to do, you need OpenSER handling 3xx
> messages coming from asterisk or the patton gw?
> If yes look the "uac_redirect" module.
>
> :tele
>
>
>
>
> On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
>
>> Hello
>> I'm using a Patton gateway with my Openser and everything works fine,
>> except when OpenSER has to redirect a call to Asterisk.
>> If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the
>> Patton gateway it doesnt work.
>>
>> In the moment Im just using
>> rewritehost(".....");
>>
>> The problem could be in the Patton gateway configuration, but I just
>> want to be sure... does OpenSER needs some special configuration in
>> order to the redirects to work?
>>
>> Thanks
>> Joao Pereira
>>
>>
>
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
2:27 p.m.
Im not using uac_redirect.
Im just using rewritehost(..) to forward the calls to an Asterisk
gateway (and then to FWD echotest).
With X-Lite (and Cisco phones and SNOM phones) it works. But it doesnt
work with the Patton gateway.
Here is some debug in OpenSER:
ppp.ppp.ppp.ppp - Patton gateways IP (public)
xxx.xxx.xxx.xxx - OpenSER IP (public)
test.startel.pt - OpenSER domain
69.90.155.70 - FWD IP
Its a call to 351210329169 that is translated (with ENUM) to
613(a)fwd.pulver.com (echo test)
U 2007/06/12 00:36:25.367038 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060
INVITE sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards
: 70..Content-Length: 222..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03
ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Route: <sip:test.startel.pt:5060;lr>..Supported: timer.
.Remote-Party-ID:
<sip:114@test.startel.pt>;party=calling;screen=no;privacy=off..Remote-Party-ID:
<sip:351210329169@test.startel.pt
;party=called..Content-Type: application/sdp..Contact:
sip:114@ppp.ppp.ppp.ppp:5060..Supported: replaces..User-Agen
t: Patton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C....v=0..o=MxSIP 0
5 IN IP4 ppp.ppp.ppp.ppp..s=SIP Call..c=IN IP4 pp
p.ppp.ppp.ppp..t=0 0..m=audio 4872 RTP/AVP 0 8 101..a=rtpmap:0
PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-e
vent/8000..a=fmtp:101
0-15..a=sendrecv..
#
U 2007/06/12 00:36:25.561665 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060
SIP/2.0 100 Giving a try..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To:
sip:351210329169@test.startel.p
t..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID:
03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 12952786
6 INVITE..Server: OpenSER (1.2.1-tls (i386/linux))..Content-Length:
0....
#
U 2007/06/12 00:36:26.018415 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060
INVITE sip:613@fwd.pulver.com SIP/2.0..Record-Route:
<sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2>..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward
s: 69..Content-Length: 222..To:
sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 0
3ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Supported: timer..Remote-Party-ID: <sip:114@test.st
artel.pt>;party=calling;screen=no;privacy=off..Remote-Party-ID:
<sip:351210329169@test.startel.pt>;party=called..Content-Type:
application/sdp..Contact: sip:114@ppp.ppp.ppp.ppp:5060..Supported:
replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3.
2.8.45 00A0BA02689C....v=0..o=MxSIP 0 5 IN IP4 ppp.ppp.ppp.ppp..s=SIP
Call..c=IN IP4 ppp.ppp.ppp.ppp..t=0 0..m=audio 4872
RTP/AVP 0 8 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8
PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=sen
drecv..
#
U 2007/06/12 00:36:26.115398 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 100 Trying..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060
;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a
c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Content-Length: 0....
#
U 2007/06/12 00:36:26.115784 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via:
SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To:
sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;t
ag=717e535f36541f2..Call-ID:
03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Content-Length: 0...
.
#
U 2007/06/12 00:36:26.118035 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 180 Ringing..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:506
0;branch=z9hG4bK962101c13..From:
sip:114@test.startel.pt;tag=717e535f36541f2..To:
sip:351210329169@test.startel.pt;tag=as51ccad
c7..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq:
129527866 INVITE..User-Agent: Asterisk PBX..Allow: INV
ITE, ACK, CANCEL, OPTIONS, BYE, REFER..Contact:
<sip:613@69.90.168.13:5028>..Content-Length: 0....
#
U 2007/06/12 00:36:26.118382 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060
SIP/2.0 180 Ringing..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..From:
sip:114@test.startel.pt;tag=717e53
5f36541f2..To:
sip:351210329169@test.startel.pt;tag=as51ccadc7..Call-ID:
03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq
: 129527866 INVITE..User-Agent: Asterisk PBX..Allow: INVITE, ACK,
CANCEL, OPTIONS, BYE, REFER..Contact: <sip:613@69.90.
168.13:5028>..Content-Length:
0....
#
U 2007/06/12 00:36:29.367666 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060
CANCEL sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards
: 70..Content-Length: 0..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac
0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Route: <sip:test.startel.pt:5060;lr>..Supported: timer..S
upported: replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3.2.8.45
00A0BA02689C....
#
U 2007/06/12 00:36:29.368573 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060
CANCEL sip:613@fwd.pulver.com SIP/2.0..Record-Route:
<sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2>..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward
s: 69..Content-Length: 0..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a
c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Supported: timer..Supported: replaces..User-Agent: P
atton SN4634 3BIS UI MxSF v3.2.8.45
00A0BA02689C....
#
U 2007/06/12 00:36:29.369009 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060
SIP/2.0 200 canceling..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To:
sip:351210329169@test.startel.pt;t
ag=eeea4be47e7c0c3a22d00fc0f271945c-878f..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bf
fccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Server: OpenSER
(1.2.1-tls (i386/linux))..Content-Length: 0....
#
U 2007/06/12 00:36:29.465000 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 100 Trying..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060
;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a
c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Content-Length: 0....
#
U 2007/06/12 00:36:29.465433 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 200 canceling..Record-Route:
<sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2>..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;b
ranch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@startel
.pt;tag=43d6c08305a5580073ddc395327059a9-73f0..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced
8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Content-Length: 0....
Sorry for the long post
Thanks a lot for the help
Joao Pereira
tele wrote:
Hi,
You use rewritehost() for route call to specific IP or host so it's
correct, the uac_redirect is a module able to handler 3xx Redirect
messages from other gw, you can also generate 3xx messages from OpenSER.
depends on your requirements.
What problem happens with the Patton GW ?
:tele
On Mon, 2007-06-11 at 14:43 +0100, Joao Pereira wrote:
Hello
My question is:
Does OpenSER needs some special configuration to redirect calls? Im just
using "rewritehost" and it works with X-Lite without problems.
The problem just appeared with the Patton Gateway.... I just need to
know in which situations do I need to configure OpenSER with
"uac_redirect" module.
Thanks
regards
Joao Pereira
tele wrote:
> Hi Joao,
>
> It's not clear want you want to do, you need OpenSER handling 3xx
> messages coming from asterisk or the patton gw?
> If yes look the "uac_redirect" module.
>
> :tele
>
>
>
>
> On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
>
>
>> Hello
>> I'm using a Patton gateway with my Openser and everything works fine,
>> except when OpenSER has to redirect a call to Asterisk.
>> If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the
>> Patton gateway it doesnt work.
>>
>> In the moment Im just using
>> rewritehost(".....");
>>
>> The problem could be in the Patton gateway configuration, but I just
>> want to be sure... does OpenSER needs some special configuration in
>> order to the redirects to work?
>>
>> Thanks
>> Joao Pereira
>>
>>
>>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
3:02 p.m.
Ok now it's more clear, when patton recive the 180 Ringing it send
without reason a CANCEL request.
Joao you can try troubleshoot the issue activating some debug in the
patton gw:
debug gateway sip transport detail 5
debug gateway sip signaling detail 5
debug gateway sip error detail 5
debug call-control detail 5
debug call-router detail 5
try to understand looking debug why after the patton recive the 180
ringing it sends a CANCEL for the call. if you want, you can send to me
the trace.
:tele
On Tue, 2007-06-12 at 12:27 +0100, Joao Pereira wrote:
Im not using uac_redirect.
Im just using rewritehost(..) to forward the calls to an Asterisk
gateway (and then to FWD echotest).
With X-Lite (and Cisco phones and SNOM phones) it works. But it doesnt
work with the Patton gateway.
Here is some debug in OpenSER:
ppp.ppp.ppp.ppp - Patton gateways IP (public)
xxx.xxx.xxx.xxx - OpenSER IP (public)
test.startel.pt - OpenSER domain
69.90.155.70 - FWD IP
Its a call to 351210329169 that is translated (with ENUM) to
613(a)fwd.pulver.com (echo test)
U 2007/06/12 00:36:25.367038 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060
INVITE sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards
: 70..Content-Length: 222..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03
ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Route: <sip:test.startel.pt:5060;lr>..Supported: timer.
.Remote-Party-ID:
<sip:114@test.startel.pt>;party=calling;screen=no;privacy=off..Remote-Party-ID:
<sip:351210329169@test.startel.pt
;party=called..Content-Type:
application/sdp..Contact:
sip:114@ppp.ppp.ppp.ppp:5060..Supported:
replaces..User-Agen
t: Patton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C....v=0..o=MxSIP 0
5 IN IP4 ppp.ppp.ppp.ppp..s=SIP Call..c=IN IP4 pp
p.ppp.ppp.ppp..t=0 0..m=audio 4872 RTP/AVP 0 8 101..a=rtpmap:0
PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-e
vent/8000..a=fmtp:101
0-15..a=sendrecv..
#
U 2007/06/12 00:36:25.561665 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060
SIP/2.0 100 Giving a try..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To:
sip:351210329169@test.startel.p
t..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID:
03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 12952786
6 INVITE..Server: OpenSER (1.2.1-tls (i386/linux))..Content-Length:
0....
#
U 2007/06/12 00:36:26.018415 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060
INVITE sip:613@fwd.pulver.com SIP/2.0..Record-Route:
<sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2>..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward
s: 69..Content-Length: 222..To:
sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 0
3ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Supported: timer..Remote-Party-ID: <sip:114@test.st
artel.pt>;party=calling;screen=no;privacy=off..Remote-Party-ID:
<sip:351210329169@test.startel.pt>;party=called..Content-Type:
application/sdp..Contact: sip:114@ppp.ppp.ppp.ppp:5060..Supported:
replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3.
2.8.45 00A0BA02689C....v=0..o=MxSIP 0 5 IN IP4 ppp.ppp.ppp.ppp..s=SIP
Call..c=IN IP4 ppp.ppp.ppp.ppp..t=0 0..m=audio 4872
RTP/AVP 0 8 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8
PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=sen
drecv..
#
U 2007/06/12 00:36:26.115398 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 100 Trying..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060
;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a
c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Content-Length: 0....
#
U 2007/06/12 00:36:26.115784 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via:
SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To:
sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;t
ag=717e535f36541f2..Call-ID:
03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
INVITE..Content-Length: 0...
.
#
U 2007/06/12 00:36:26.118035 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 180 Ringing..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:506
0;branch=z9hG4bK962101c13..From:
sip:114@test.startel.pt;tag=717e535f36541f2..To:
sip:351210329169@test.startel.pt;tag=as51ccad
c7..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq:
129527866 INVITE..User-Agent: Asterisk PBX..Allow: INV
ITE, ACK, CANCEL, OPTIONS, BYE, REFER..Contact:
<sip:613@69.90.168.13:5028>..Content-Length: 0....
#
U 2007/06/12 00:36:26.118382 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060
SIP/2.0 180 Ringing..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..From:
sip:114@test.startel.pt;tag=717e53
5f36541f2..To:
sip:351210329169@test.startel.pt;tag=as51ccadc7..Call-ID:
03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq
: 129527866 INVITE..User-Agent: Asterisk PBX..Allow: INVITE, ACK,
CANCEL, OPTIONS, BYE, REFER..Contact: <sip:613@69.90.
168.13:5028>..Content-Length:
0....
#
U 2007/06/12 00:36:29.367666 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060
CANCEL sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards
: 70..Content-Length: 0..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac
0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Route: <sip:test.startel.pt:5060;lr>..Supported: timer..S
upported: replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3.2.8.45
00A0BA02689C....
#
U 2007/06/12 00:36:29.368573 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060
CANCEL sip:613@fwd.pulver.com SIP/2.0..Record-Route:
<sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2>..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward
s: 69..Content-Length: 0..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a
c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Supported: timer..Supported: replaces..User-Agent: P
atton SN4634 3BIS UI MxSF v3.2.8.45
00A0BA02689C....
#
U 2007/06/12 00:36:29.369009 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060
SIP/2.0 200 canceling..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To:
sip:351210329169@test.startel.pt;t
ag=eeea4be47e7c0c3a22d00fc0f271945c-878f..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bf
fccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Server: OpenSER
(1.2.1-tls (i386/linux))..Content-Length: 0....
#
U 2007/06/12 00:36:29.465000 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 100 Trying..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060
;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a
c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Content-Length: 0....
#
U 2007/06/12 00:36:29.465433 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060
SIP/2.0 200 canceling..Record-Route:
<sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2>..Via: SIP/2.0/UDP
xxx.xxx.xxx.xxx;b
ranch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP
ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@startel
.pt;tag=43d6c08305a5580073ddc395327059a9-73f0..From:
sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced
8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866
CANCEL..Content-Length: 0....
Sorry for the long post
Thanks a lot for the help
Joao Pereira
tele wrote:
> Hi,
>
> You use rewritehost() for route call to specific IP or host so it's
> correct, the uac_redirect is a module able to handler 3xx Redirect
> messages from other gw, you can also generate 3xx messages from OpenSER.
> depends on your requirements.
>
> What problem happens with the Patton GW ?
>
> :tele
>
>
> On Mon, 2007-06-11 at 14:43 +0100, Joao Pereira wrote:
>
>> Hello
>> My question is:
>> Does OpenSER needs some special configuration to redirect calls? Im just
>> using "rewritehost" and it works with X-Lite without problems.
>> The problem just appeared with the Patton Gateway.... I just need to
>> know in which situations do I need to configure OpenSER with
>> "uac_redirect" module.
>>
>> Thanks
>> regards
>> Joao Pereira
>>
>>
>> tele wrote:
>>
>>> Hi Joao,
>>>
>>> It's not clear want you want to do, you need OpenSER handling 3xx
>>> messages coming from asterisk or the patton gw?
>>> If yes look the "uac_redirect" module.
>>>
>>> :tele
>>>
>>>
>>>
>>>
>>> On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
>>>
>>>
>>>> Hello
>>>> I'm using a Patton gateway with my Openser and everything works
fine,
>>>> except when OpenSER has to redirect a call to Asterisk.
>>>> If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the
>>>> Patton gateway it doesnt work.
>>>>
>>>> In the moment Im just using
>>>> rewritehost(".....");
>>>>
>>>> The problem could be in the Patton gateway configuration, but I just
>>>> want to be sure... does OpenSER needs some special configuration in
>>>> order to the redirects to work?
>>>>
>>>> Thanks
>>>> Joao Pereira
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>
>
6374
days inactive
6378
days old
5 comments
2 participants
participants (2)
-
Joao Pereira -
tele