29 Mar
2004
29 Mar
'04
3:57 p.m.
Tried that, ie put the "" around the 192.168.0.100 and get the same
response ie Error: bad config file (2 errors).
The report doesn't specify what the errors are Im afraid.
Re naming of server. I don't use DNS on my network just ip addresses.
Im providing access to the server to the outside world by using port
forwarding. So Im assuming that I can use the ip address instead of the
name in the config file. Is this acceptable to SER??
Best regards Martin Coggin
Information in this message is confidential and may be legally
privileged. It is intended solely for the person to whom it is
addressed. If you have received this email in error please delete it
immediately and also reply to me to let me know. Thank you for your
help.
-----Original Message-----
From: Atle Samuelsen [mailto:clona@cyberhouse.no]
Sent: 29 March 2004 09:12
To: Martin Coggin
Subject: Re: [Serusers] Quick start SER Too much shared memory
Hey Martin
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 10:04]:
Tks. Got through to point 6 of the section on adding
my sql ser.
I edited the ser.cfg file see the attached file. However I got 2
errors
reported as per extract below and sorry I cant find
them in the file.
hattie:/etc/init.d# ser restart
ERROR: bad config file (2 errors)
hattie:/etc/init.d#
Note that I don't have DNS server on my network so Im using my
internal
# Uncomment this if you want to use digest authentication
if (!www_authorize(192.168.0.100, "subscriber"))
{
www_challenge(192.168.0.100, "0");
break;
};
Im guessing without seeing the erros that you are hitting are that you
are missing some " in the block I pasted erly'er..
try to change it to !www_authorize("192.168.0.100",
and www_channenge("192.168.0.100", ..
tho. remeber that your domain must now be 192.168.0.100...
ip address, I assume that hence the entry for the ip
address is
acceptable. My hosts file does include the host name. Is this ok.
Ill
be doing a forward on my firewall from my ip address
to my internal ip
address of the server.
Im a little concerned that I didn't do step 3 completely. Ie creation
of MySQL tables. I used the /usr/sbin/ser_mysql.sh creation process.
I
entered a blank password for root, I entered ser as
the domain: I got
a
creating database ... message, then got another
"Enter password:"
request, entered blank and then returned to the command line.
You've been very patient with your help tks Martin
- Atle
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
29 Mar
29 Mar
4:09 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
have you checked the /var/log/messages file? There should be something
there.
if not, increase the debug level.. and try once more.
- Atle
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 14:57]:
Tried that, ie put the "" around the
192.168.0.100 and get the same
response ie Error: bad config file (2 errors).
The report doesn't specify what the errors are Im afraid.
Re naming of server. I don't use DNS on my network just ip addresses.
Im providing access to the server to the outside world by using port
forwarding. So Im assuming that I can use the ip address instead of the
name in the config file. Is this acceptable to SER??
Best regards Martin Coggin
Information in this message is confidential and may be legally
privileged. It is intended solely for the person to whom it is
addressed. If you have received this email in error please delete it
immediately and also reply to me to let me know. Thank you for your
help.
-----Original Message-----
From: Atle Samuelsen [mailto:clona@cyberhouse.no]
Sent: 29 March 2004 09:12
To: Martin Coggin
Subject: Re: [Serusers] Quick start SER Too much shared memory
Hey Martin
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 10:04]:
Tks. Got through to point 6 of the section on
adding my sql ser.
I edited the ser.cfg file see the attached file. However I got 2
errors
reported as per extract below and sorry I cant
find them in the file.
hattie:/etc/init.d# ser restart
ERROR: bad config file (2 errors)
hattie:/etc/init.d#
Note that I don't have DNS server on my network so Im using my
internal
# Uncomment this if you want to use digest authentication
if (!www_authorize(192.168.0.100, "subscriber"))
{
www_challenge(192.168.0.100, "0");
break;
};
Im guessing without seeing the erros that you are hitting are that you
are missing some " in the block I pasted erly'er..
try to change it to !www_authorize("192.168.0.100",
and www_channenge("192.168.0.100", ..
tho. remeber that your domain must now be 192.168.0.100...
ip address, I assume that hence the entry for the
ip address is
acceptable. My hosts file does include the host name. Is this ok.
Ill
be doing a forward on my firewall from my ip
address to my internal ip
address of the server.
Im a little concerned that I didn't do step 3 completely. Ie creation
of MySQL tables. I used the /usr/sbin/ser_mysql.sh creation process.
I
entered a blank password for root, I entered ser
as the domain: I got
a
creating database ... message, then got another
"Enter password:"
request, entered blank and then returned to the command line.
You've been very patient with your help tks Martin
- Atle
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
4:15 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
On Mar 29, 2004 at 15:09, 'Atle Samuelsen' <clona(a)camaro.no> wrote:
have you checked the /var/log/messages file? There
should be something
there.
if not, increase the debug level.. and try once more.
Or start ser with the -c switch (ser -c -f config_file ...). This will
only check the config and report the errors on stderr.
Andrei
- Atle
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 14:57]:
Tried that, ie put the "" around the
192.168.0.100 and get the same
response ie Error: bad config file (2 errors).
The report doesn't specify what the errors are Im afraid.
Re naming of server. I don't use DNS on my network just ip addresses.
Im providing access to the server to the outside world by using port
forwarding. So Im assuming that I can use the ip address instead of the
name in the config file. Is this acceptable to SER??
Best regards Martin Coggin
Information in this message is confidential and may be legally
privileged. It is intended solely for the person to whom it is
addressed. If you have received this email in error please delete it
immediately and also reply to me to let me know. Thank you for your
help.
-----Original Message-----
From: Atle Samuelsen [mailto:clona@cyberhouse.no]
Sent: 29 March 2004 09:12
To: Martin Coggin
Subject: Re: [Serusers] Quick start SER Too much shared memory
Hey Martin
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 10:04]:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Tks. Got through to point 6 of the section on
adding my sql ser.
I edited the ser.cfg file see the attached file. However I got 2
errors
reported as per extract below and sorry I cant
find them in the file.
hattie:/etc/init.d# ser restart
ERROR: bad config file (2 errors)
hattie:/etc/init.d#
Note that I don't have DNS server on my network so Im using my
internal
# Uncomment this if you want to use digest authentication
if (!www_authorize(192.168.0.100, "subscriber"))
{
www_challenge(192.168.0.100, "0");
break;
};
Im guessing without seeing the erros that you are hitting are that you
are missing some " in the block I pasted erly'er..
try to change it to !www_authorize("192.168.0.100",
and www_channenge("192.168.0.100", ..
tho. remeber that your domain must now be 192.168.0.100...
ip address, I assume that hence the entry for the
ip address is
acceptable. My hosts file does include the host name. Is this ok.
Ill
be doing a forward on my firewall from my ip
address to my internal ip
address of the server.
Im a little concerned that I didn't do step 3 completely. Ie creation
of MySQL tables. I used the /usr/sbin/ser_mysql.sh creation process.
I
entered a blank password for root, I entered ser
as the domain: I got
a
creating database ... message, then got another
"Enter password:"
request, entered blank and then returned to the command line.
You've been very patient with your help tks Martin
- Atle
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
30 Mar
30 Mar
10:54 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
Ok I thought Id go back one step and check if the mysql database exists.
It doesn't, I used mysqld, ser exists but there are no tables in it
whatsoever.
Ive read the contents of ser_mysql.sh and the relevant bit is I assume
the config section which is as follows.
#################################################################
# config vars
#################################################################
DBNAME=ser
DBHOST=localhost
USERNAME=ser
DEFAULT_PW=heslo
ROUSER=serro
RO_PW=47serro11
SQL_USER="root"
CMD="mysql -h $DBHOST -u$SQL_USER "
DUMP_CMD="mysqldump -h $DBHOST -u$SQL_USER -c -t "
BACKUP_CMD="mysqldump -h $DBHOST -u$SQL_USER -c "
TABLE_TYPE="TYPE=MyISAM"
# user name column
USERCOL="username"
GENHA1='gen_ha1'
#################################################################
Now when I try to set up the database using ser_mysql.sh create (I also
tried reinit too) the following is what I get.
hattie:/usr/sbin# ser_mysql.sh create
MySql password for root:
Domain (realm) for the default user 'admin': ser
creating database ser ...
Enter password:
ERROR 1045: Access denied for user: 'root@localhost' (Using password:
YES)
OK so I know I put the right root password in for Mysql cos it works
with mysqld.
What is the right response to Domain (realm) for the default user
'admin': as you can see Ive used SER. Is this right.
What password is to be entered in the line after "creating database
ser". Ive tried heslo, Ive tried mysql root password, Ive tried YES.
All get the same response
Best regards Martin Coggin
-----Original Message-----
From: Andrei Pelinescu-Onciul
[mailto:pelinescu-onciul@fokus.fraunhofer.de]
Sent: 29 March 2004 14:15
To: 'Atle Samuelsen'
Cc: Martin Coggin; serusers(a)lists.iptel.org
Subject: Re: [Serusers] Quick start SER Too much shared memory
On Mar 29, 2004 at 15:09, 'Atle Samuelsen' <clona(a)camaro.no> wrote:
have you checked the /var/log/messages file? There
should be something
there.
if not, increase the debug level.. and try once more.
Or start ser with the -c switch (ser -c -f config_file ...). This will
only check the config and report the errors on stderr.
Andrei
- Atle
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 14:57]:
> Tried that, ie put the "" around the 192.168.0.100 and get the same
> response ie Error: bad config file (2 errors).
>
> The report doesn't specify what the errors are Im afraid.
>
> Re naming of server. I don't use DNS on my network just ip
addresses.
> Im providing access to the server to the outside
world by using port
> forwarding. So Im assuming that I can use the ip address instead of
the
> name in the config file. Is this acceptable to
SER??
>
> Best regards Martin Coggin
>
> Information in this message is confidential and may be legally
> privileged. It is intended solely for the person to whom it is
> addressed. If you have received this email in error please delete
it
> immediately and also reply to me to let me know.
Thank you for your
> help.
>
>
> -----Original Message-----
> From: Atle Samuelsen [mailto:clona@cyberhouse.no]
> Sent: 29 March 2004 09:12
> To: Martin Coggin
> Subject: Re: [Serusers] Quick start SER Too much shared memory
>
> Hey Martin
>
> * Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 10:04]:
> > Tks. Got through to point 6 of the section on adding my sql ser.
> >
> > I edited the ser.cfg file see the attached file. However I got 2
> errors
> > reported as per extract below and sorry I cant find them in the
file.
> >
> > hattie:/etc/init.d# ser restart
> > ERROR: bad config file (2 errors)
> > hattie:/etc/init.d#
>
>
> >
> > Note that I don't have DNS server on my network so Im using my
> internal
> # Uncomment this if you want to use digest authentication
> if (!www_authorize(192.168.0.100,
"subscriber"))
> {
> www_challenge(192.168.0.100, "0");
> break;
> };
>
>
> Im guessing without seeing the erros that you are hitting are that
you
> are missing some " in the block I pasted
erly'er..
> try to change it to !www_authorize("192.168.0.100",
> and www_channenge("192.168.0.100", ..
> tho. remeber that your domain must now be 192.168.0.100...
>
>
>
> > ip address, I assume that hence the entry for the ip address is
> > acceptable. My hosts file does include the host name. Is this
ok.
> Ill
> > be doing a forward on my firewall from my ip address to my
internal ip
> > address of the server.
> >
> > Im a little concerned that I didn't do step 3 completely. Ie
creation
> > of MySQL tables. I used the
/usr/sbin/ser_mysql.sh creation
process.
> I
> > entered a blank password for root, I entered ser as the domain: I
got
a
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers creating database ... message, then got another
"Enter password:"
request, entered blank and then returned to the command line.
You've been very patient with your help tks Martin
- Atle
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
10:54 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
And here is the copy of the std when I tried the -c and -f commands.
hattie:/etc/init.d# ser restart -c
0(4636) parse error (65,1-5): parse error
0(4636) parse error (65,1-5):
ERROR: bad config file (2 errors)
hattie:/etc/init.d# ser restart -f./ser/ser.cfg
ERROR: loading config file(./ser/ser.cfg): Not a directory
hattie:/etc/init.d# ser restart -f../ser/ser.cfg
ERROR: bad config file (2 errors)
hattie:/etc/init.d#
Best regards Martin Coggin
-----Original Message-----
From: Andrei Pelinescu-Onciul
[mailto:pelinescu-onciul@fokus.fraunhofer.de]
Sent: 29 March 2004 14:15
To: 'Atle Samuelsen'
Cc: Martin Coggin; serusers(a)lists.iptel.org
Subject: Re: [Serusers] Quick start SER Too much shared memory
On Mar 29, 2004 at 15:09, 'Atle Samuelsen' <clona(a)camaro.no> wrote:
have you checked the /var/log/messages file? There
should be something
there.
if not, increase the debug level.. and try once more.
Or start ser with the -c switch (ser -c -f config_file ...). This will
only check the config and report the errors on stderr.
Andrei
- Atle
* Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 14:57]:
> Tried that, ie put the "" around the 192.168.0.100 and get the same
> response ie Error: bad config file (2 errors).
>
> The report doesn't specify what the errors are Im afraid.
>
> Re naming of server. I don't use DNS on my network just ip
addresses.
> Im providing access to the server to the outside
world by using port
> forwarding. So Im assuming that I can use the ip address instead of
the
> name in the config file. Is this acceptable to
SER??
>
> Best regards Martin Coggin
>
> Information in this message is confidential and may be legally
> privileged. It is intended solely for the person to whom it is
> addressed. If you have received this email in error please delete
it
> immediately and also reply to me to let me know.
Thank you for your
> help.
>
>
> -----Original Message-----
> From: Atle Samuelsen [mailto:clona@cyberhouse.no]
> Sent: 29 March 2004 09:12
> To: Martin Coggin
> Subject: Re: [Serusers] Quick start SER Too much shared memory
>
> Hey Martin
>
> * Martin Coggin <martin(a)mc2-consulting.co.uk> [040329 10:04]:
> > Tks. Got through to point 6 of the section on adding my sql ser.
> >
> > I edited the ser.cfg file see the attached file. However I got 2
> errors
> > reported as per extract below and sorry I cant find them in the
file.
> >
> > hattie:/etc/init.d# ser restart
> > ERROR: bad config file (2 errors)
> > hattie:/etc/init.d#
>
>
> >
> > Note that I don't have DNS server on my network so Im using my
> internal
> # Uncomment this if you want to use digest authentication
> if (!www_authorize(192.168.0.100,
"subscriber"))
> {
> www_challenge(192.168.0.100, "0");
> break;
> };
>
>
> Im guessing without seeing the erros that you are hitting are that
you
> are missing some " in the block I pasted
erly'er..
> try to change it to !www_authorize("192.168.0.100",
> and www_channenge("192.168.0.100", ..
> tho. remeber that your domain must now be 192.168.0.100...
>
>
>
> > ip address, I assume that hence the entry for the ip address is
> > acceptable. My hosts file does include the host name. Is this
ok.
> Ill
> > be doing a forward on my firewall from my ip address to my
internal ip
> > address of the server.
> >
> > Im a little concerned that I didn't do step 3 completely. Ie
creation
> > of MySQL tables. I used the
/usr/sbin/ser_mysql.sh creation
process.
> I
> > entered a blank password for root, I entered ser as the domain: I
got
a
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers creating database ... message, then got another
"Enter password:"
request, entered blank and then returned to the command line.
You've been very patient with your help tks Martin
- Atle
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
11:23 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
On Mar 30, 2004 at 20:54, Martin Coggin <martin(a)mc2-consulting.co.uk> wrote:
And here is the copy of the std when I tried the -c
and -f commands.
Try the following:
/usr/sbin/ser -c -f /etc/ser/ser.cfg -E -dddddd
(replace /usr/sbin/ser with your actual path to ser binary, it might be
/usr/local/sbin/ser, depending on how you did install it, and
/etc/ser/ser.cfg with the path to your ser.cfg).
-E will force logging to stderr and -dddddd will increase the debug
level.
Andrei
31 Mar
31 Mar
9:15 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
Here is the output from this command.
hattie:/etc/init.d# ser -c -f /etc/ser/ser.cfg -E -dddddd
0(5082) read 2256005572 from /dev/random
0(5082) seeding PRNG with 3336767248
0(5082) test random number 347705935
0(5082) shm_mem_init: success
0(5082) DEBUG: register_fifo_cmd: new command (print) registered
0(5082) DEBUG: register_fifo_cmd: new command (uptime) registered
0(5082) DEBUG: register_fifo_cmd: new command (version) registered
0(5082) DEBUG: register_fifo_cmd: new command (pwd) registered
0(5082) DEBUG: register_fifo_cmd: new command (arg) registered
0(5082) DEBUG: register_fifo_cmd: new command (which) registered
0(5082) DEBUG: register_fifo_cmd: new command (ps) registered
0(5082) DEBUG: register_fifo_cmd: new command (kill) registered
0(5082) loading module /usr/lib/ser/modules/mysql.so
0(5082) loading module /usr/lib/ser/modules/sl.so
0(5082) loading module /usr/lib/ser/modules/tm.so
0(5082) loading module /usr/lib/ser/modules/rr.so
0(5082) loading module /usr/lib/ser/modules/maxfwd.so
0(5082) loading module /usr/lib/ser/modules/usrloc.so
0(5082) loading module /usr/lib/ser/modules/registrar.so
0(5082) loading module /usr/lib/ser/modules/auth.so
0(5082) loading module /usr/lib/ser/modules/auth_db.so
0(5082) set_mod_param_regex: usrloc matches module usrloc
0(5082) set_mod_param_regex: found <db_mode> in module usrloc
[/usr/lib/ser/modules/usrloc.so]
0(5082) set_mod_param_regex: auth_db matches module auth_db
0(5082) set_mod_param_regex: found <calculate_ha1> in module auth_db
[/usr/lib/ser/modules/auth_db.so]
0(5082) set_mod_param_regex: auth_db matches module auth_db
0(5082) set_mod_param_regex: found <password_column> in module auth_db
[/usr/lib/ser/modules/auth_db.so]
0(5082) parse error (65,1-5): parse error
0(5082) parse error (65,1-5):
ERROR: bad config file (2 errors)
0(5082) DEBUG: tm_shutdown : start
0(5082) DEBUG: tm_shutdown : empting hash table
0(5082) DEBUG: tm_shutdown: releasing timers
0(5082) DEBUG: tm_shutdown : removing semaphores
0(5082) DEBUG: tm_shutdown : done
0(5082) shm_mem_destroy
0(5082) destroying the shared memory lock
hattie:/etc/init.d#
Best regards Martin Coggin
-----Original Message-----
From: Andrei Pelinescu-Onciul
[mailto:pelinescu-onciul@fokus.fraunhofer.de]
Sent: 30 March 2004 21:24
To: Martin Coggin
Cc: 'Atle Samuelsen'; serusers(a)lists.iptel.org
Subject: Re: [Serusers] Quick start SER Too much shared memory
On Mar 30, 2004 at 20:54, Martin Coggin <martin(a)mc2-consulting.co.uk>
wrote:
And here is the copy of the std when I tried the -c
and -f commands.
Try the following:
/usr/sbin/ser -c -f /etc/ser/ser.cfg -E -dddddd
(replace /usr/sbin/ser with your actual path to ser binary, it might be
/usr/local/sbin/ser, depending on how you did install it, and
/etc/ser/ser.cfg with the path to your ser.cfg).
-E will force logging to stderr and -dddddd will increase the debug
level.
Andrei
1 Apr
1 Apr
8:48 a.m.
New subject: [Serusers] Quick start SER Too much shared memory
On Mar 31, 2004 at 19:15, Martin Coggin <martin(a)mc2-consulting.co.uk> wrote:
Here is the output from this command.
hattie:/etc/init.d# ser -c -f /etc/ser/ser.cfg -E -dddddd
[...]
0(5082) parse error (65,1-5): parse error
0(5082) parse error (65,1-5):
Your problem is on line 65 of your config file, columns 1-5.
Andrei
3 Apr
3 Apr
12:38 p.m.
New subject: [Serusers] Quick start SER Too much shared memory
Tks, using the commands you suggested I have been able to fix the cfg
file.
Best regards Martin Coggin
-----Original Message-----
From: Andrei Pelinescu-Onciul
[mailto:pelinescu-onciul@fokus.fraunhofer.de]
Sent: 01 April 2004 06:49
To: Martin Coggin
Cc: 'Atle Samuelsen'; serusers(a)lists.iptel.org
Subject: Re: [Serusers] Quick start SER Too much shared memory
On Mar 31, 2004 at 19:15, Martin Coggin <martin(a)mc2-consulting.co.uk>
wrote:
Here is the output from this command.
hattie:/etc/init.d# ser -c -f /etc/ser/ser.cfg -E -dddddd
[...]
0(5082) parse error (65,1-5): parse error
0(5082) parse error (65,1-5):
Your problem is on line 65 of your config file, columns 1-5.
Andrei
7538
days inactive
7543
days old
8 comments
3 participants
participants (3)
-
'Atle Samuelsen' -
Andrei Pelinescu-Onciul -
Martin Coggin