9 Dec
2003
9 Dec
'03
11:42 a.m.
Thanks Jan.
I did as it appears in,
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg?r
ev=HEAD
When i introduce the code as it specified in the nathelper.cfg
modparam("nathelper", "ping_nated_only", 1) # Ping only clients
behind
-- set_mod_param_regex: parameter <ping_nated_only> not found in module
<nathelper>
parse error (100,43-44): Can't set module parameter
if (nat_uac_test("3")) {
-- unknown command, missing hodule
-rwxr-xr-x 1 827 827 120363 Nov 21 12:10 nathelper.so -- I
hope this is the latest module in nathelper.so
Am I doing in right way?
Kannaiyan
----- Original Message -----
From: "Jan Janak" <jan(a)iptel.org>
To: "Kannaiyan Natesan" <nkans(a)lycos.co.uk>
Cc: <serusers(a)lists.iptel.org>
Sent: Monday, December 08, 2003 6:28 PM
Subject: Re: [Serusers] Nathelper cfg ?
See sip_router/etc/nathelper.cfg. The config file
below is incomplete
(you do not rewrite contacts, for example).
Jan.
On 08-12 13:23, Kannaiyan Natesan wrote:
> My script has following information regarding NAT,
>
> I have installed RTPProxy and I cannot hear any communication between
the
> phones.
>
> Here is my configuration,
>
> # global parameters
>
> mhomed=yes
>
> # Nathelper
> loadmodule "/usr/local/lib/ser/modules/nathelper.so"
>
>
> # Parameter section
>
> modparam("nathelper","natping_interval", 10)
>
>
> # Routing section
> route {
>
> .....
> if( method=="INVITE") {
> record_route();
> force_rtp_proxy();
> /* set up reply processing */
> t_on_reply("1");
> };
> ....
> }
>
>
> #route leg
> # all incoming replied for t_onreplied transactions enter here
> onreply_route[1] {
> if( status =~"[12][0-9][0-9]" ){
> force_rtp_proxy();
> };
> }
>
> Can anyone please help me what should I need to do further to call
between
my Cisco
ATA 186 and X-lite.
Best Regards,
Kannaiyan
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
9 Dec
9 Dec
12:22 p.m.
On Dec 09, 2003 at 09:42, Kannaiyan Natesan <nkans(a)lycos.co.uk> wrote:
[...]
What ser version do you use? You should use either the CVS HEAD
(unstable) or the updated 0.8.12 (0.8.12 + updated nathelper, available
only from the cvs, use the rel_0_8_12 tag).
The original 0.8.12 release has an older nathelper (at the release
moment, we felt the new features in nathelper were not tested enough to
include them in a stable release).
Andrei
12:28 p.m.
I installed with tar.gz 0.8.12 file.
May I know how can I update through cvs. Do I need to get complete code of
ser or only nathelper?
Thanks.
Kannaiyan
----- Original Message -----
From: "Andrei Pelinescu-Onciul" <pelinescu-onciul(a)fokus.fraunhofer.de>
To: "Kannaiyan Natesan" <nkans(a)lycos.co.uk>
Cc: "Jan Janak" <jan(a)iptel.org>rg>; <serusers(a)lists.iptel.org>
Sent: Tuesday, December 09, 2003 10:22 AM
Subject: Re: [Serusers] Nathelper cfg ?
On Dec 09, 2003 at 09:42, Kannaiyan Natesan
<nkans(a)lycos.co.uk> wrote:
[...]
>
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg?r
ev=HEAD
What ser version do you use? You should use either the CVS HEAD
(unstable) or the updated 0.8.12 (0.8.12 + updated nathelper, available
only from the cvs, use the rel_0_8_12 tag).
The original 0.8.12 release has an older nathelper (at the release
moment, we felt the new features in nathelper were not tested enough to
include them in a stable release).
Andrei
1:20 p.m.
On Dec 09, 2003 at 10:28, Kannaiyan Natesan <nkans(a)lycos.co.uk> wrote:
I installed with tar.gz 0.8.12 file.
May I know how can I update through cvs. Do I need to get complete code of
ser or only nathelper?
You neede the complete code (the "new" nathelper involves some minor ser
core changes, that's why we were so reluctant to include it in the
stable release without more testing).
See http://www.iptel.org/ser/cvs/ for cvs information.
Andrei
2:10 p.m.
Since more work need to be done on that,
Can you please guide me how can I configure with the current module.
Kannaiyan
----- Original Message -----
From: "Andrei Pelinescu-Onciul" <pelinescu-onciul(a)fokus.fraunhofer.de>
To: "Kannaiyan Natesan" <nkans(a)lycos.co.uk>
Cc: "Jan Janak" <jan(a)iptel.org>rg>; <serusers(a)lists.iptel.org>
Sent: Tuesday, December 09, 2003 11:20 AM
Subject: Re: [Serusers] Nathelper cfg ?
On Dec 09, 2003 at 10:28, Kannaiyan Natesan
<nkans(a)lycos.co.uk> wrote:
> I installed with tar.gz 0.8.12 file.
> May I know how can I update through cvs. Do I need to get complete code
of
ser or only
nathelper?
You neede the complete code (the "new" nathelper involves some minor ser
core changes, that's why we were so reluctant to include it in the
stable release without more testing).
See http://www.iptel.org/ser/cvs/ for cvs information.
Andrei
3:10 p.m.
On Dec 09, 2003 at 12:10, Kannaiyan Natesan <nkans(a)lycos.co.uk> wrote:
Since more work need to be done on that,
Can you please guide me how can I configure with the current module.
see modules/nathelper/nathelper.cfg from your downloaded sources.
However that version does not have nat_uac_test or ping_nated_only
support. It is better to upgrade if you want nathelper, the current
version is much better.
Andrei
7658
days inactive
7658
days old
5 comments
2 participants
participants (2)
-
Andrei Pelinescu-Onciul -
Kannaiyan Natesan