Sipura Firmware is 1.0.20
We are already in talks with Sipura about this issue as we found a bug for them yesterday. It appears though based on the Etheral traces and ngrep that the Sipura is sending the BYE messages - but SER is not forwarding them along.
We are using Ser 8.12 on a Sun Ultra 60 - and as I said before, all other instances work flawlessly.
Thanks,
- Darren
-----Original Message----- From: Andres [mailto:andres@telesip.net] Sent: Thursday, December 18, 2003 2:58 PM To: Darren Sessions; serusers@lists.iptel.org Subject: Re: [Serusers] BYE Message Problem
On Thursday 18 December 2003 14:50, Darren Sessions wrote:
We also have a problem with BYE's not being sent from an on-net call (sipura to sipura).
What firmware version are you using? We have been testing the SPA2000 for about 3 weeks now and have not seen this issue.
-----Original Message----- From: Darren Sessions Sent: Thursday, December 18, 2003 2:32 PM To: 'serusers@lists.iptel.org' Subject: RE: Serusers Digest, Vol 8, Issue 16 Importance: High
Situation:
Endpoint is called Party (Sipura SPA2000)
Calling Party is routed through from a TDM call and VoIP'd by Cisco 3640 router then sent to SER.
Endpoint receives call - everything works. When the Sipura hangs up the call, it sends a BYE to ser - but ser does not send the BYE to the router to disconnect the TDM channel.
All other situations result in a completed call with channels released on the router just fine.
After further inspection - we noticed that when the Sipura hangs up and send the BYE to SER, SER responds with this:
SIP/2.0 481 Call/Transaction Does Not Exist Via: SIP/2.0/UDP 11.11.111.155:5060;branch=z9hG4bK-b76fe29f From: sip:8646783182@22.22.222.154;tag=bc5a80577e3d5642 To: sip:8644679887@33.33.333.157;tag=322BCA98-25A3 Call-ID: F429FDCE-30B011D8-BA0EDB9C-52307829@33.33.333.157 CSeq: 101 BYE Contact: sip:8644679887@44.44.444.148 Server: Sip EXpress router (0.8.12 (i386/linux)) Content-Length: 0 Warning: 392 44.44.444.148:5060 "Noisy feedback tells: pid=20033 req_src_ip=22.22.222.154 req_src_port=5060 in_uri=sip:8644679887@44.44.444.148:5060 out_uri=sip:8644679887@44.44.444.148:5060 via_cnt==0"
Any ideas?
Thanks,
- Darren
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
On Thursday 18 December 2003 15:11, Darren Sessions wrote:
Sipura Firmware is 1.0.20
We are already in talks with Sipura about this issue as we found a bug for them yesterday. It appears though based on the Etheral traces and ngrep that the Sipura is sending the BYE messages - but SER is not forwarding them along.
Can you post all the messages here(INVITE...to ...BYE)? Otherwise it is hard to guess where the problem might be. I'm sure Jiri or Jan can spot the error right away.
We are using Ser 8.12 on a Sun Ultra 60 - and as I said before, all other instances work flawlessly.
Thanks,
- Darren
-----Original Message----- From: Andres [mailto:andres@telesip.net] Sent: Thursday, December 18, 2003 2:58 PM To: Darren Sessions; serusers@lists.iptel.org Subject: Re: [Serusers] BYE Message Problem
On Thursday 18 December 2003 14:50, Darren Sessions wrote:
We also have a problem with BYE's not being sent from an on-net call (sipura to sipura).
What firmware version are you using? We have been testing the SPA2000 for about 3 weeks now and have not seen this issue.
-----Original Message----- From: Darren Sessions Sent: Thursday, December 18, 2003 2:32 PM To: 'serusers@lists.iptel.org' Subject: RE: Serusers Digest, Vol 8, Issue 16 Importance: High
Situation:
Endpoint is called Party (Sipura SPA2000)
Calling Party is routed through from a TDM call and VoIP'd by Cisco 3640 router then sent to SER.
Endpoint receives call - everything works. When the Sipura hangs up the call, it sends a BYE to ser - but ser does not send the BYE to the router to disconnect the TDM channel.
All other situations result in a completed call with channels released on the router just fine.
After further inspection - we noticed that when the Sipura hangs up and send the BYE to SER, SER responds with this:
SIP/2.0 481 Call/Transaction Does Not Exist Via: SIP/2.0/UDP 11.11.111.155:5060;branch=z9hG4bK-b76fe29f From: sip:8646783182@22.22.222.154;tag=bc5a80577e3d5642 To: sip:8644679887@33.33.333.157;tag=322BCA98-25A3 Call-ID: F429FDCE-30B011D8-BA0EDB9C-52307829@33.33.333.157 CSeq: 101 BYE Contact: sip:8644679887@44.44.444.148 Server: Sip EXpress router (0.8.12 (i386/linux)) Content-Length: 0 Warning: 392 44.44.444.148:5060 "Noisy feedback tells: pid=20033 req_src_ip=22.22.222.154 req_src_port=5060 in_uri=sip:8644679887@44.44.444.148:5060 out_uri=sip:8644679887@44.44.444.148:5060 via_cnt==0"
Any ideas?
Thanks,
- Darren
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Andres -
Darren Sessions