Hi,
Can someone recommend ATA models that work easy with Openser, based on experience?
I am currently using Sipura SPA3000 and PAP2 which are highly configurable but at the same time, need much works with trial and error fashion to get them work with Openser, Freeradius, Mediaproxy and CDRTool combination.
Especially, I am not quite sure if these are handling "VIA" header correctly. Because setting up Outbound proxy was the only solution I found to get these units send "BYE" to the server, otherwise it will send "BYE" directly to PSTN gateway, resulting forward_reply error, killing a child process and mediaproxy never had a chance to mark "stop time" for acc.
Can anyone suggest ATAs that imposes least burden of configuration to work with the setting above?
Thanks mush in advance.
John K.
Sipura has many via configuration options as well, and you are right to assume that you have a configuration error when your BYEs go astray. Switching to another ATA with less options can be a double-edged sword. With less options, it will work (maybe, many are quite buggy) with less pains up front, but most likely you will get hit by other problems later on. g-)
johnk@koreanet.us wrote:
Hi,
Can someone recommend ATA models that work easy with Openser, based on experience?
I am currently using Sipura SPA3000 and PAP2 which are highly configurable but at the same time, need much works with trial and error fashion to get them work with Openser, Freeradius, Mediaproxy and CDRTool combination.
Especially, I am not quite sure if these are handling "VIA" header correctly. Because setting up Outbound proxy was the only solution I found to get these units send "BYE" to the server, otherwise it will send "BYE" directly to PSTN gateway, resulting forward_reply error, killing a child process and mediaproxy never had a chance to mark "stop time" for acc.
Can anyone suggest ATAs that imposes least burden of configuration to work with the setting above?
Thanks mush in advance.
John K.
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
johnk@koreanet.us wrote:
Hi,
Can someone recommend ATA models that work easy with Openser, based on experience?
I am currently using Sipura SPA3000 and PAP2 which are highly configurable but at the same time, need much works with trial and error fashion to get them work with Openser, Freeradius, Mediaproxy and CDRTool combination.
Especially, I am not quite sure if these are handling "VIA" header correctly. Because setting up Outbound proxy was the only solution I found to get these units send "BYE" to the server, otherwise it will send "BYE" directly to PSTN gateway,
Are you sure you are using record_route(); on your ser.cfg? Thats is usually what needs to be done to make sure "BYE" messages go to the server.
resulting forward_reply error, killing a child process and mediaproxy never had a chance to mark "stop time" for acc.
Can anyone suggest ATAs that imposes least burden of configuration to work with the setting above?
Thanks mush in advance.
John K.
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers