Hi Basit, Thanks for response. I have tried the below commands to grant all privileges. The commands results OK. Still I was facing the same issue which is mentioned in trailing mail. Could anyone guide me here to proceed further. Any suggestions/solutions would be very helpful. Regards, Sainath ---------- Forwarded message ---------- From: "Abdul Basit" <basitstar@hotmail.commailto:basitstar@hotmail.com> Date: Jan 27, 2016 7:37 PM Subject: Re: [SR-Users] Kamailio IMS deployment To: "Kamailio SER - Users Mailing List" <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org>, "franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at" <franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at> Cc: use the following command and try again..
GRANT ALL PRIVILEGES ON *.* TO '<user>'@'<hostname>' IDENTIFIED BY '<password>'; GRANT ALL PRIVILEGES ON *.* TO '<user>'@'%' IDENTIFIED BY '<password>'; FLUSH PRIVILEGES;
regards, AB ________________________________ From: sainath.ellendula@wipro.commailto:sainath.ellendula@wipro.com To: franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at Date: Wed, 27 Jan 2016 06:21:52 +0000 CC: sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio IMS deployment
Hi Franz,
Thanks for the response.
As suggested followed below commands to check the GRANTs on database hss_db.
mysql -u root -p
show grants for 'hss'@'server.net1.test';
The output result is same as mentioned below.
Could you please guide me here to proceed further.
Regards, Sainath
---------- Forwarded message ---------- From: "Franz Edler" <franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at> Date: Jan 27, 2016 1:07 AM Subject: RE: [SR-Users] Kamailio IMS deployment To: "Kranti Kumar" <krantikumara@gmail.commailto:krantikumara@gmail.com>, "Kamailio (SER) - Users Mailing List" <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org> Cc: "Ramya Y" <y.ramya146@gmail.commailto:y.ramya146@gmail.com>
Obviously the access of HSS to the database did not succeed.
You should check if access permissions to the database is enabled for HSS.
Check the GRANTs on the database hss_db.
mysql -u root -p
show grants for 'hss'@'server.net1.test';
quit;
The result should be:
+-------------------------------------------------------------------------------------------------------------------+
| Grants for hss@server.net1.testmailto:hss@server.net1.test |
+-------------------------------------------------------------------------------------------------------------------+
| GRANT USAGE ON *.* TO 'hss'@'server.net1.test' IDENTIFIED BY PASSWORD '*AC83FCF24B79020EF2C51D780CDFA559F25CC9BE' |
| GRANT SELECT, INSERT, UPDATE, DELETE ON `hss_db`.* TO 'hss'@'server.net1.test' |
+-------------------------------------------------------------------------------------------------------------------+
BR Franz
From: Kranti Kumar [mailto:krantikumara@gmail.commailto:krantikumara@gmail.com] Sent: Sunday, January 24, 2016 10:55 AM To: franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at; Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org> Cc: Ramya Y <y.ramya146@gmail.commailto:y.ramya146@gmail.com> Subject: Re: [SR-Users] Kamailio IMS deployment
Thanks a lot Franz.
Observed few issues even after changes done in /etc/bind.
Please find the below Errors in each interfaces and also find the attachment of /var/log/syslog(not shared full logs)
Could you please help me here to proceed further.
HSS – Configured IP : 10.0.0.9
root@server:~# ./hss.sh – Configured IP : 10.0.0.9
Building Classpath
Classpath is lib/xml-apis.jar:lib/xercesImpl.jar:lib/xerces-2.4.0.jar:lib/xalan-2.4.0.jar:lib/tomcat-util.jar:lib/tomcat-http.jar:lib/tomcat-coyote.jar:lib/struts.jar:lib/servlets-default.jar:lib/servlet-api.jar:lib/naming-resources.jar:lib/naming-factory.jar:lib/mysql-connector-java-3.1.12-bin.jar:lib/mx4j-3.0.1.jar:lib/log4j.jar:lib/junit.jar:lib/junitee.jar:lib/jta.jar:lib/jsp-api.jar:lib/jmx.jar:lib/jdp.jar:lib/jasper-runtime.jar:lib/jasper-compiler-jdt.jar:lib/jasper-compiler.jar:lib/hibernate3.jar:lib/FHoSS.jar:lib/ehcache-1.1.jar:lib/dom4j-1.6.1.jar:lib/commons-validator.jar:lib/commons-modeler.jar:lib/commons-logging.jar:lib/commons-logging-1.0.4.jar:lib/commons-lang.jar:lib/commons-fileupload.jar:lib/commons-el.jar:lib/commons-digester.jar:lib/commons-collections-3.1.jar:lib/commons-beanutils.jar:lib/cglib-2.1.3.jar:lib/catalina-optional.jar:lib/catalina.jar:lib/c3p0-0.9.1.jar:lib/base64.jar:lib/asm.jar:lib/asm-attrs.jar:lib/antlr-2.7.6.jar::log4j.properties:..
2016-01-21 14:07:07,876 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat Tomcat-Server is started.
2016-01-21 14:07:12,462 WARN org.apache.catalina.connector.MapperListener - registerEngine Unknown default host: 10.0.0.9
2016-01-21 14:07:16,578 INFO de.fhg.fokus.hss.web.servlet.ResponseFilter - init Response Filter Initialisation!
2016-01-21 14:07:17,966 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat WebConsole of FHoSS was started !
2016-01-21 14:08:21,200 WARN com.mchange.v2.resourcepool.BasicResourcePool - run com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask@1670988bmailto:com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask@1670988b -- Acquisition Attempt Failed!!! Clearing pending acquires. While trying to acquire a needed new resource, we failed to succeed more than the maximum number of allowed acquisition attempts (60). Last acquisition attempt exception:
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
** BEGIN NESTED EXCEPTION **
java.net.SocketException
MESSAGE: java.net.ConnectException: Connection refused
STACKTRACE:
java.net.SocketException: java.net.ConnectException: Connection refused
PCSCF – Configured IP : 10.0.0.10
root@server:~# kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg
loading modules under config path: /usr/local/lib64/kamailio/modules/
0(2352) INFO: <core> [sctp_core.c:75]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module
Listening on
udp: pcscf.net1.test [10.0.0.10]:4060
Aliases:
*: pcscf.net1.test:*
WARNING: no fork mode
0(2352) INFO: rr [../outbound/api.h:54]: ob_load_api(): Failed to import bind_ob
0(2352) INFO: rr [rr_mod.c:174]: mod_init(): outbound module not available
0(2352) INFO: ims_usrloc_pcscf [hslot.c:62]: ul_init_locks(): locks array size 512
0(2352) INFO: <core> [udp_server.c:150]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992
0(2352) INFO: <core> [udp_server.c:200]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984
0(2352) WARNING: ims_usrloc_pcscf [usrloc_db.c:59]: connect_db(): DB connection already open... continuing
^C^C 0(2352) NOTICE: <core> [main.c:683]: handle_sigs(): Thank you for flying kamailio!!!
1(2373) INFO: <core> [main.c:798]: sig_usr(): signal 15 received
2(2374) INFO: <core> [main.c:798]: sig_usr(): signal 15 received
0(2352) INFO: <core> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized
ICSCF – Configured IP : 10.0.0.11
root@server:~# kamailio -f /usr/local/etc/kamailio/kamailio-icscf.cfg
loading modules under config path: /usr/local/lib64/kamailio/modules/
0(2353) INFO: <core> [sctp_core.c:75]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module
Listening on
udp: icscf.net1.test [10.0.0.11]:5060
Aliases:
*: icscf.net1.test:*
WARNING: no fork mode
0(2353) INFO: rr [../outbound/api.h:54]: ob_load_api(): Failed to import bind_ob
0(2353) INFO: rr [rr_mod.c:174]: mod_init(): outbound module not available
0(2353) INFO: <core> [udp_server.c:150]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992
0(2353) INFO: <core> [udp_server.c:200]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984
0(2353) INFO: cdp [mod.c:227]: cdp_child_init(): CDiameterPeer child starting ...
0(2353) INFO: cdp [mod.c:229]: cdp_child_init(): ... CDiameterPeer child started
10(2370) INFO: cdp [timer.c:205]: timer_process(): Timer process starting up...
6(2366) INFO: cdp [worker.c:331]: worker_process(): [3] Worker process started...
7(2367) INFO: cdp [receiver.c:445]: receiver_process(): receiver_process(): [] Receiver process doing init on new process...
7(2367) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [] Receiver process starting up...
8(2368) INFO: cdp [receiver.c:445]: receiver_process(): receiver_process(): [hss.net1.test] Receiver process doing init on new process...
8(2368) INFO: cdp [receiver.c:183]: add_serviced_peer(): add_serviced_peer(): Adding serviced_peer_t to receiver for peer [hss.net1.test]
9(2369) INFO: cdp [acceptor.c:82]: acceptor_process(): Acceptor process starting up...
9(2369) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.9 port 3869
9(2369) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.9 port 3869
9(2369) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ...
8(2368) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [hss.net1.test] Receiver process starting up...
10(2370) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0
10(2370) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test
10(2370) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868
10(2370) WARNING: cdp [receiver.c:911]: peer_connect(): peer_connect(): Error opening connection to to 10.0.0.9 port 3868 >Connection refused
10(2370) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0
10(2370) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test
10(2370) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868
10(2370) INFO: cdp [receiver.c:932]: peer_connect(): peer_connect(): Peer hss.net1.test:3868 connected
10(2370) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6
10(2370) WARNING: cdp [peermanager.c:315]: peer_timer(): Inactivity on peer [hss.net1.test], sending DWR... - if we don't get a reply, the peer will be closed
8(2368) INFO: cdp [receiver.c:802]: receive_loop(): select_recv(): [hss.net1.test] read on socket [14] returned 0 > ... dropping
8(2368) INFO: cdp [receiver.c:219]: disconnect_serviced_peer(): drop_serviced_peer(): [hss.net1.test] Disconnecting from peer
^C10(2370) INFO: <core> [main.c:798]: sig_usr(): signal 2 received
0(2353) ALERT: <core> [main.c:725]: handle_sigs(): child process 2361 exited normally, status=0
0(2353) INFO: <core> [main.c:740]: handle_sigs(): dont_fork turned on, living on
0(2353) NOTICE: <core> [main.c:683]: handle_sigs(): Thank you for flying kamailio!!!
2(2362) INFO: <core> [main.c:798]: sig_usr(): signal 15 received
0(2353) INFO: cdp [mod.c:242]: cdp_exit(): CDiameterPeer child stopping ...
0(2353) INFO: cdp [diameter_peer.c:428]: diameter_peer_destroy(): destroy_diameter_peer(): Terminating all children...
0(2353) INFO: cdp [diameter_peer.c:435]: diameter_peer_destroy(): destroy_diameter_peer(): Waiting for child [2370] to terminate...
0(2353) INFO: cdp [diameter_peer.c:447]: diameter_peer_destroy(): destroy_diameter_peer(): All processes terminated. Cleaning up.
0(2353) INFO: cdp [worker.c:140]: worker_destroy(): Unlocking workers waiting on empty queue...
0(2353) INFO: cdp [worker.c:143]: worker_destroy(): Unlocking workers waiting on full queue...
0(2353) CRITICAL: cdp [diameter_peer.c:487]: diameter_peer_destroy(): destroy_diameter_peer(): Bye Bye from C Diameter Peer test
0(2353) INFO: cdp [mod.c:244]: cdp_exit(): ... CDiameterPeer child stoped
0(2353) INFO: <core> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized
SCSCF – Configured IP : 10.0.0.12
root@server:/etc# kamailio -f /usr/local/etc/kamailio/kamailio-scscf.cfg
loading modules under config path: /usr/local/lib64/kamailio/modules/
0(2371) INFO: <core> [sctp_core.c:75]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module
Listening on
udp: scscf.net1.test [10.0.0.12]:6060
Aliases:
*: scscf.net1.test:*
WARNING: no fork mode
0(2371) INFO: rr [../outbound/api.h:54]: ob_load_api(): Failed to import bind_ob
0(2371) INFO: rr [rr_mod.c:174]: mod_init(): outbound module not available
0(2371) INFO: ims_usrloc_scscf [hslot.c:69]: ul_init_locks(): locks array size 512
0(2371) INFO: ims_usrloc_scscf [hslot_sp.c:67]: subs_init_locks(): locks array size 512
0(2371) INFO: ims_usrloc_scscf [contact_hslot.c:67]: init_contacts_locks(): locks array size 512
0(2371) INFO: <core> [udp_server.c:150]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992
0(2371) INFO: <core> [udp_server.c:200]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984
0(2371) INFO: cdp [mod.c:227]: cdp_child_init(): CDiameterPeer child starting ...
0(2371) INFO: cdp [mod.c:229]: cdp_child_init(): ... CDiameterPeer child started
3(2381) INFO: cdp [worker.c:331]: worker_process(): [0] Worker process started...
4(2382) INFO: cdp [worker.c:331]: worker_process(): [1] Worker process started...
5(2383) INFO: cdp [worker.c:331]: worker_process(): [2] Worker process started...
7(2390) INFO: cdp [receiver.c:445]: receiver_process(): receiver_process(): [] Receiver process doing init on new process...
7(2390) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [] Receiver process starting up...
8(2392) INFO: cdp [receiver.c:445]: receiver_process(): receiver_process(): [hss.net1.test] Receiver process doing init on new process...
8(2392) INFO: cdp [receiver.c:183]: add_serviced_peer(): add_serviced_peer(): Adding serviced_peer_t to receiver for peer [hss.net1.test]
8(2392) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [hss.net1.test] Receiver process starting up...
9(2393) INFO: cdp [acceptor.c:82]: acceptor_process(): Acceptor process starting up...
9(2393) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.9 port 3870
9(2393) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.9 port 3870
9(2393) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ...
10(2394) INFO: cdp [timer.c:205]: timer_process(): Timer process starting up...
10(2394) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0
10(2394) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test
10(2394) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868
10(2394) WARNING: cdp [receiver.c:911]: peer_connect(): peer_connect(): Error opening connection to to 10.0.0.9 port 3868 >Connection refused
10(2394) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0
10(2394) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test
10(2394) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868
10(2394) INFO: cdp [receiver.c:932]: peer_connect(): peer_connect(): Peer hss.net1.test:3868 connected
10(2394) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6
10(2394) WARNING: cdp [peermanager.c:315]: peer_timer(): Inactivity on peer [hss.net1.test], sending DWR... - if we don't get a reply, the peer will be closed
10(2394) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 6
8(2392) INFO: cdp [receiver.c:802]: receive_loop(): select_recv(): [hss.net1.test] read on socket [15] returned 0 > ... dropping
8(2392) INFO: cdp [receiver.c:219]: disconnect_serviced_peer(): drop_serviced_peer(): [hss.net1.test] Disconnecting from peer
10(2394) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0
10(2394) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test
10(2394) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868
10(2394) WARNING: cdp [receiver.c:911]: peer_connect(): peer_connect(): Error opening connection to to 10.0.0.9 port 3868 >Connection refused
^C11(2398) INFO: <core> [main.c:798]: sig_usr(): signal 2 received
9(2393) INFO: <core> [main.c:798]: sig_usr(): signal 2 received
0(2371) ALERT: <core> [main.c:725]: handle_sigs(): child process 2381 exited normally, status=0
0(2371) INFO: <core> [main.c:740]: handle_sigs(): dont_fork turned on, living on
0(2371) NOTICE: <core> [main.c:683]: handle_sigs(): Thank you for flying kamailio!!!
10(2394) INFO: <core> [main.c:798]: sig_usr(): signal 15 received
0(2371) INFO: cdp [mod.c:242]: cdp_exit(): CDiameterPeer child stopping ...
On Fri, Jan 22, 2016 at 2:16 AM, Franz Edler <franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at> wrote:
Hi,
you can see the first error is a database error:
ERROR: db_mysql [km_my_con.c:124]: db_mysql_new_connection(): driver error: Can't connect to MySQL server on 'server.net1.test' (111)
This error I expected because you have to adapt the access permissions to the database.
Just check the GRANT statements in my log-file and try to understand what they do. Then adapt it accordingly.
BR Franz
From: Ramya Y [mailto:y.ramya146@gmail.commailto:y.ramya146@gmail.com] Sent: Wednesday, January 20, 2016 2:19 PM To: franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at; Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org>
Subject: Re: [SR-Users] Kamailio IMS deployment
Hi Franz
we have tried with different interfaces(eth0(10.0.0.9),eth1(10.0.0.10),eth2(10.0.0.11),eth3(10.0.0.12) for P/I/S ,but facing below error.
root@server:/etc# kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg
loading modules under config path: /usr/local/lib64/kamailio/modules/
0(1630) INFO: <core> [sctp_core.c:75]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module
Listening on
udp: pcscf.net1.test [10.0.0.10]:4060
Aliases:
*: pcscf.net1.test:*
WARNING: no fork mode
0(1630) INFO: rr [../outbound/api.h:54]: ob_load_api(): Failed to import bind_ob
0(1630) INFO: rr [rr_mod.c:174]: mod_init(): outbound module not available
0(1630) INFO: ims_usrloc_pcscf [hslot.c:62]: ul_init_locks(): locks array size 512
0(1630) ERROR: db_mysql [km_my_con.c:124]: db_mysql_new_connection(): driver error: Can't connect to MySQL server on 'server.net1.test' (111)
0(1630) ERROR: <core> [db.c:318]: db_do_init2(): could not add connection to the pool 0(1630) ERROR: ims_usrloc_pcscf [usrloc_db.c:79]: init_db(): unable to connect to the database
0(1630) ERROR: ims_usrloc_pcscf [ul_mod.c:203]: mod_init(): Error initializing db connection
0(1630) ERROR: <core> [sr_module.c:962]: init_mod(): Error while initializing module ims_usrloc_pcscf (/usr/local/lib64/kamailio/modules/ims_usrloc_pcscf.so)
ERROR: error while initializing modules
0(1630) INFO: <core> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialize
could you please help me how to proceed further,
steps followed:
===========
1)Modified at - /etc/network/interfaces:
created eth1,eth2,eth3 for P/I/S-CSCF.
Interfaces are up.
2)Added Bind address at /etc/mysql/my.cnf
bind-address 10.0.0.9
bind-address 10.0.0.10
bind-address 10.0.0.11
bind-address 10.0.0.12
3)Modified at /etc/bind/net1.test.zone
$ORIGIN net1.test.
$TTL 1W
@ 1D IN SOA serverkde. root.net1.test (
2010081401 ; Serial YYYYMMDDXX
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
1D IN NS server
server 1D IN A 10.0.0.9
hss 1D IN CNAME server
as1 1D IN CNAME server
as2 1D IN CNAME server
xcap 1D IN CNAME server
server1 1D IN A 10.0.0.10
pcscf 1D IN CNAME server1
server2 1D IN A 10.0.0.11
icscf 1D IN CNAME server2
server3 1D IN A 10.0.0.12
scscf 1D IN CNAME server3
4)Modified at /etc/bind/0.0.10.zone
$TTL 86400
@ IN SOA server. root.net2.test (
2010081401 ; Serial YYYYMMDDXX
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS server.net1.test.
IN NS server1.net1.test.
IN NS server2.net1.test.
IN NS server3.net1.test.
10 IN PTR notebook.net1.test.
9 IN PTR server.net1.test.
7 IN PTR server.net2.test.
5)Modified at /etc/resolve.conf
domain net1.test
search net1.test
nameserver server.net1.test
nameserver server1.net1.test
nameserver server2.net1.test
nameserver server3.net1.test
6)Modified at /etc/hosts
127.0.0.1 localhost
10.0.0.9 server.net1.test server
10.0.0.10 server1.net1.test server1
10.0.0.11 server2.net1.test server2
10.0.0.12 server3.net1.test server3
10.0.0.9 net1.test
10.0.0.10 pcscf.net1.test
10.0.0.11 icscf.net1.test
10.0.0.12 scscf.net1.test
Thanks,
Ramyasri.
On Sun, Jan 17, 2016 at 5:33 PM, Franz Edler <franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at> wrote:
Fine. This exactly was my intention.
BR Franz
IMS,
not pure theory, and this is just the kind I wanted!
Will try your deploy in education process this year. (will share the
results in
sr-
users@lists.sip-router.orgmailto:users@lists.sip-router.org http://lists.sip-router.org/cgi- bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.comhttp://www.wipro.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com
Hi Sainath,
As you have changed the IP-addresses of I-CSCF and S-CSCF you have to adapt the IP-addresses in icscf.xml and scscf.xml accordingly.
See the bind attribute in “<Acceptor /> element.
This should help.
BR Franz
From: sainath.ellendula@wipro.com [mailto:sainath.ellendula@wipro.com] Sent: Thursday, January 28, 2016 7:44 AM To: basitstar@hotmail.com; sr-users@lists.sip-router.org; franz.edler@technikum-wien.at Subject: Re: [SR-Users] Kamailio IMS deployment
Hi Basit,
Thanks for response.
I have tried the below commands to grant all privileges. The commands results OK.
Still I was facing the same issue which is mentioned in trailing mail.
Could anyone guide me here to proceed further. Any suggestions/solutions would be very helpful.
Hi Franz,
Thanks for your response.
As suggested, modified the changes in icscf.xml and scscf.xml files, PFA modified files.
Still getting few errors as below:
HSS : 10.0.0.9 – HSS started fine but observed few warnings:
2016-01-29 15:01:53,266 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat Tomcat-Server is started. 2016-01-29 15:01:55,188 WARN org.apache.catalina.connector.MapperListener - registerEngine Unknown default host: 10.0.0.9 2016-01-29 15:01:57,116 INFO de.fhg.fokus.hss.web.servlet.ResponseFilter - init Response Filter Initialisation! 2016-01-29 15:01:58,050 INFO de.fhg.fokus.hss.main.TomcatServer - startTomcat WebConsole of FHoSS was started ! 2016-01-29 15:03:00,553 WARN com.mchange.v2.resourcepool.BasicResourcePool - run com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask@21b579c9 -- Acquisition Attempt Failed!!! Clearing pending acquires. While trying to acquire a needed new resource, we failed to succeed more than the maximum number of allowed acquisition attempts (60). Last acquisition attempt exception: com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
PCSCF : 10.0.0.10 – PCSCF is connected fine and don’t see any warnings and errors.
ICSCF : 10.0.0.11 – getting below errors
9(1396) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.11 port 3869 9(1396) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.11 port 3869 9(1396) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ... 10(1397) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0 10(1397) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test 10(1397) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868 10(1397) WARNING: cdp [receiver.c:911]: peer_connect(): peer_connect(): Error opening connection to to 10.0.0.9 port 3868 >Connection refused
SCSCF : 10.0.0.12 – getting below errors
9(1408) WARNING: cdp [tcp_accept.c:123]: create_socket(): create_socket(): Trying to open/bind/listen on 10.0.0.12 port 3870 9(1408) WARNING: cdp [tcp_accept.c:148]: create_socket(): create_socket(): Successful socket open/bind/listen on 10.0.0.12 port 3870 9(1408) INFO: cdp [acceptor.c:96]: acceptor_process(): Acceptor opened sockets. Entering accept loop ... 7(1406) INFO: cdp [receiver.c:450]: receiver_process(): receiver_process(): [] Receiver process starting up... 10(1409) INFO: cdp [timer.c:205]: timer_process(): Timer process starting up... 10(1409) INFO: cdp [peermanager.c:280]: peer_timer(): peer_timer(): Peer hss.net1.test State 0 10(1409) INFO: cdp [peerstatemachine.c:526]: I_Snd_Conn_Req(): I_Snd_Conn_Req(): Peer hss.net1.test 10(1409) WARNING: cdp [receiver.c:864]: peer_connect(): peer_connect(): Trying to connect to 10.0.0.9 port 3868 10(1409) WARNING: cdp [receiver.c:911]: peer_connect(): peer_connect(): Error opening connection to to 10.0.0.9 port 3868 >Connection refused
Could you please guide me for any more changes has to be done.
Thanks in advance!!
Regards, Sainath
From: Franz Edler [mailto:franz.edler@technikum-wien.at] Sent: Friday, January 29, 2016 9:57 AM To: Sainath Ellendula (WT01 - NEP) sainath.ellendula@wipro.com; basitstar@hotmail.com; sr-users@lists.sip-router.org Subject: RE: [SR-Users] Kamailio IMS deployment
Hi Sainath,
As you have changed the IP-addresses of I-CSCF and S-CSCF you have to adapt the IP-addresses in icscf.xml and scscf.xml accordingly. See the bind attribute in “<Acceptor /> element.
This should help.
BR Franz
From: sainath.ellendula@wipro.commailto:sainath.ellendula@wipro.com [mailto:sainath.ellendula@wipro.com] Sent: Thursday, January 28, 2016 7:44 AM To: basitstar@hotmail.commailto:basitstar@hotmail.com; sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org; franz.edler@technikum-wien.atmailto:franz.edler@technikum-wien.at Subject: Re: [SR-Users] Kamailio IMS deployment
Hi Basit, Thanks for response. I have tried the below commands to grant all privileges. The commands results OK. Still I was facing the same issue which is mentioned in trailing mail. Could anyone guide me here to proceed further. Any suggestions/solutions would be very helpful. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com
Hi,
Now it seems to be clear to me where the problem might come from:
I have restricted access to mysql server to address 10.0.0.9 only. You have to change the bind-address statement in /etc/mysql.cnf accordingly. See: http://dev.mysql.com/doc/refman/5.7/en/server-options.html#option_mysqld_bin...
Change the address to "*" or to 0.0.0.0.
BR Franz
-
Franz Edler -
sainath.ellendula＠wipro.com