Hi Klaus,
is there any documenation - save of course the source - with regards to this inter-FIFO communication protocol/mechanism?
All I´ve understood so far is, that it seems one pushes SIP/SDP "messages" into the FIFO (s.th. like a named pipe/UNIX socket?).
Also, I have seen scripts which seem to indicate that there is something like "application escapes", where SER functionality can be addressed via s.th like /^:name_of_function/)
Can anybody point to some technical spec/description of this mechanism and how to configure/script it?
Thanx,
Harry
Dr. Harry Behrens Projektleitung BIB3R DAI Labor - Technische Universität Berlin Sekretariat GOR 1-1, Franklinstrasse 28/29, 10587 Berlin
Fon: +49 30 314 23383 Fax: +49 30 314 21799
Email: harry.behrens@dai-labor.de
-----Ursprüngliche Nachricht----- Von: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Gesendet: Mittwoch, 12. November 2003 16:13 An: sesha@iic.com; serusers@lists.iptel.org Betreff: RE: [Serusers] Voicemail
Have you installed sems? Have you started sems? (http://developer.berlios.de/projects/sems)
This is the voicemail programm for ser. You have to install it on the same machine where ser is running and they will communicate using a FIFO.
regards, Klaus
-----Original Message----- From: Sesha B [mailto:sesha@iic.com] Sent: Wednesday, November 12, 2003 4:11 PM To: Klaus Darilion; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
I'm getting this error from debugs:
500 couldn not contact announcement server.
Please let me know what it means? Is it possible to put the voicemail on the PBX? I have the voicemail configured for this number on the PBX. Thank you.
-----Original Message----- From: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Sent: Wednesday, November 12, 2003 9:42 AM To: sesha@iic.com; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
Usually, if the phone (user) is registered, the call will
be forwarded
to the SIP phone instead of forwarding it to the voicemail.
If a want
to redirect the call to the voicemail after several seconds (e.g. if no one picks up the phone), you have to use the fr_inv_timer timer
and set up
script as shown in: http://www.iptel.org/ser/doc/seruser/seruser.html#REPLYPROCESSING
regards, Klaus
-----Original Message----- From: Sesha B [mailto:sesha@iic.com] Sent: Wednesday, November 12, 2003 2:44 PM To: Jiri Kuthan; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
Hi,
I'm trying to implement voicemail. When a call is made to a SIP phone, and if the SIP phone is ringing, the "ngrep port
5060" on the
SER shows that it is connected. So, it is looking it as a successful connection and hence it is not going to the answering machine. Is there a roundabout solution for this? Please let me know. Thank you.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi Harry,
no there is no documentation available. You have to read the source code to understand the details. Generally SER pushes details of an incoming request through the FIFO if requested by the config script. An application reads from that FIFO and passes a reply back through FIFO again.
May the source be with you :-) Nils
On Wednesday 12 November 2003 17:28, Harry Behrens wrote:
Hi Klaus,
is there any documenation - save of course the source - with regards to this inter-FIFO communication protocol/mechanism?
All I´ve understood so far is, that it seems one pushes SIP/SDP "messages" into the FIFO (s.th. like a named pipe/UNIX socket?).
Also, I have seen scripts which seem to indicate that there is something like "application escapes", where SER functionality can be addressed via s.th like /^:name_of_function/)
Can anybody point to some technical spec/description of this mechanism and how to configure/script it?
Thanx,
Harry
Dr. Harry Behrens Projektleitung BIB3R DAI Labor - Technische Universität Berlin Sekretariat GOR 1-1, Franklinstrasse 28/29, 10587 Berlin
Fon: +49 30 314 23383 Fax: +49 30 314 21799
Email: harry.behrens@dai-labor.de
-----Ursprüngliche Nachricht----- Von: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Gesendet: Mittwoch, 12. November 2003 16:13 An: sesha@iic.com; serusers@lists.iptel.org Betreff: RE: [Serusers] Voicemail
Have you installed sems? Have you started sems? (http://developer.berlios.de/projects/sems)
This is the voicemail programm for ser. You have to install it on the same machine where ser is running and they will communicate using a FIFO.
regards, Klaus
-----Original Message----- From: Sesha B [mailto:sesha@iic.com] Sent: Wednesday, November 12, 2003 4:11 PM To: Klaus Darilion; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
I'm getting this error from debugs:
500 couldn not contact announcement server.
Please let me know what it means? Is it possible to put the voicemail on the PBX? I have the voicemail configured for this number on the PBX. Thank you.
-----Original Message----- From: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Sent: Wednesday, November 12, 2003 9:42 AM To: sesha@iic.com; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
Usually, if the phone (user) is registered, the call will
be forwarded
to the SIP phone instead of forwarding it to the voicemail.
If a want
to redirect the call to the voicemail after several seconds (e.g. if no one picks up the phone), you have to use the fr_inv_timer timer
and set up
script as shown in: http://www.iptel.org/ser/doc/seruser/seruser.html#REPLYPROCESSING
regards, Klaus
-----Original Message----- From: Sesha B [mailto:sesha@iic.com] Sent: Wednesday, November 12, 2003 2:44 PM To: Jiri Kuthan; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
Hi,
I'm trying to implement voicemail. When a call is made to a SIP phone, and if the SIP phone is ringing, the "ngrep port
5060" on the
SER shows that it is connected. So, it is looking it as a successful connection and hence it is not going to the answering machine. Is there a roundabout solution for this? Please let me know. Thank you.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Yes,
and in addition to that there are some escape commands which say: Replace this tag with the outgoing IP address.
Jan.
On 12-11 17:35, Nils Ohlmeier wrote:
Hi Harry,
no there is no documentation available. You have to read the source code to understand the details. Generally SER pushes details of an incoming request through the FIFO if requested by the config script. An application reads from that FIFO and passes a reply back through FIFO again.
May the source be with you :-) Nils
On Wednesday 12 November 2003 17:28, Harry Behrens wrote:
Hi Klaus,
is there any documenation - save of course the source - with regards to this inter-FIFO communication protocol/mechanism?
All I´ve understood so far is, that it seems one pushes SIP/SDP "messages" into the FIFO (s.th. like a named pipe/UNIX socket?).
Also, I have seen scripts which seem to indicate that there is something like "application escapes", where SER functionality can be addressed via s.th like /^:name_of_function/)
Can anybody point to some technical spec/description of this mechanism and how to configure/script it?
Thanx,
Harry
Dr. Harry Behrens Projektleitung BIB3R DAI Labor - Technische Universität Berlin Sekretariat GOR 1-1, Franklinstrasse 28/29, 10587 Berlin
Fon: +49 30 314 23383 Fax: +49 30 314 21799
Email: harry.behrens@dai-labor.de
-----Ursprüngliche Nachricht----- Von: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Gesendet: Mittwoch, 12. November 2003 16:13 An: sesha@iic.com; serusers@lists.iptel.org Betreff: RE: [Serusers] Voicemail
Have you installed sems? Have you started sems? (http://developer.berlios.de/projects/sems)
This is the voicemail programm for ser. You have to install it on the same machine where ser is running and they will communicate using a FIFO.
regards, Klaus
-----Original Message----- From: Sesha B [mailto:sesha@iic.com] Sent: Wednesday, November 12, 2003 4:11 PM To: Klaus Darilion; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
I'm getting this error from debugs:
500 couldn not contact announcement server.
Please let me know what it means? Is it possible to put the voicemail on the PBX? I have the voicemail configured for this number on the PBX. Thank you.
-----Original Message----- From: Klaus Darilion [mailto:darilion@ict.tuwien.ac.at] Sent: Wednesday, November 12, 2003 9:42 AM To: sesha@iic.com; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
Usually, if the phone (user) is registered, the call will
be forwarded
to the SIP phone instead of forwarding it to the voicemail.
If a want
to redirect the call to the voicemail after several seconds (e.g. if no one picks up the phone), you have to use the fr_inv_timer timer
and set up
script as shown in: http://www.iptel.org/ser/doc/seruser/seruser.html#REPLYPROCESSING
regards, Klaus
-----Original Message----- From: Sesha B [mailto:sesha@iic.com] Sent: Wednesday, November 12, 2003 2:44 PM To: Jiri Kuthan; serusers@lists.iptel.org Subject: RE: [Serusers] Voicemail
Hi,
I'm trying to implement voicemail. When a call is made to a SIP phone, and if the SIP phone is ringing, the "ngrep port
5060" on the
SER shows that it is connected. So, it is looking it as a successful connection and hence it is not going to the answering machine. Is there a roundabout solution for this? Please let me know. Thank you.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Harry Behrens -
Jan Janak -
Nils Ohlmeier