28 Sep
2011
28 Sep
'11
12:56 p.m.
Hello,
it is time to set the time to release v3.2.0. From my point of view,
testing went very well, considering also that core and main modules were
not touched much during this devel cycle, the most of the efforts were
on new modules and application service components such as presence
server, Lua ...
A convenient date for me will be Tuesday, October 18, 2011, allowing to
work a bit on packaging and docs. If there are other preferences, jump
in this discussion.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
28 Sep
28 Sep
1:01 p.m.
New subject: [sr-dev] releasing v3.2.0
Hello Daniel,
I had one issue in the sipcapture (mirroring mode), but the problem was
found and I'll commit the patches today/tommorow.
Wbr,
Alexandr
2011/9/28 Daniel-Constantin Mierla <miconda(a)gmail.com>
Hello,
it is time to set the time to release v3.2.0. From my point of view,
testing went very well, considering also that core and main modules were not
touched much during this devel cycle, the most of the efforts were on new
modules and application service components such as presence server, Lua ...
A convenient date for me will be Tuesday, October 18, 2011, allowing to
work a bit on packaging and docs. If there are other preferences, jump in
this discussion.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
______________________________**_________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**dev<http://l…
1:06 p.m.
On 09/28/2011 12:56 PM, Daniel-Constantin Mierla wrote:
Hello,
it is time to set the time to release v3.2.0. From my point of view,
testing went very well, considering also that core and main modules were
not touched much during this devel cycle, the most of the efforts were
on new modules and application service components such as presence
server, Lua ...
A convenient date for me will be Tuesday, October 18, 2011, allowing to
work a bit on packaging and docs. If there are other preferences, jump
in this discussion.
Cheers,
Daniel
Hello Daniel,
I have some patches regarding IPv6 interface discovery on Linux. Now the
IPv6 interfaces have to be manually binded to via a listen directive
(because ipv6 discovery doesn't work on linux), but this patch fixes it
.So if kamailio is not given a listen interface , he will discover any
non-link-local ipv6 iface and bind to it. This changes the default
behavior (no IPv6 default binding), and works for all supported
transport protocols (UDP, TCP, SCTP, TLS(over TCP))
The patch is fairly well tested (but not yet in production), and is
based on Linux specific RT_NETLINK sockets (for other NIX flavors like
BSD the present code works well).
Do you think this patch is of interest for 3.2 release?
Marius
--
Zbihlei Marius
Head of
Linux Development Services Romania
1&1 Internet Development srl Tel KA: 754-9512
Str Mircea Eliade 18 Tel RO: +40-31-223-9512
Sect 1, Bucuresti mailto: marius.zbihlei(a)1and1.ro
71295, Romania
1:24 p.m.
Hello Marius,
On 9/28/11 12:06 PM, marius zbihlei wrote:
On 09/28/2011 12:56 PM, Daniel-Constantin Mierla
wrote:
can you push it in a
personal branch to review the impact on the
existing code. It is of interest, of course, ultimately there can be a
parameter (cfg or command line) to control it.
Thanks,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
it is time to set the time to release v3.2.0. From my point of view,
testing went very well, considering also that core and main modules were
not touched much during this devel cycle, the most of the efforts were
on new modules and application service components such as presence
server, Lua ...
A convenient date for me will be Tuesday, October 18, 2011, allowing to
work a bit on packaging and docs. If there are other preferences, jump
in this discussion.
Cheers,
Daniel
Hello Daniel,
I have some patches regarding IPv6 interface discovery on Linux. Now
the IPv6 interfaces have to be manually binded to via a listen
directive (because ipv6 discovery doesn't work on linux), but this
patch fixes it .So if kamailio is not given a listen interface , he
will discover any non-link-local ipv6 iface and bind to it. This
changes the default behavior (no IPv6 default binding), and works for
all supported transport protocols (UDP, TCP, SCTP, TLS(over TCP))
The patch is fairly well tested (but not yet in production), and is
based on Linux specific RT_NETLINK sockets (for other NIX flavors like
BSD the present code works well).
Do you think this patch is of interest for 3.2 release? 
1:31 p.m.
On Wednesday 28 September 2011, Daniel-Constantin Mierla wrote:
[default binding for IPv6]
Hi Daniel,
in my opinion the IPv6 behaviour should be consistent to the one in IPv4 -
this is probably what out users expect anyway. So if we really need another
cfg parameter for this, the default should be like in IPv4.
Best regards,
Henning
Do you think this patch is of interest for 3.2
release?
can you push it in a personal branch to review the impact on the
existing code. It is of interest, of course, ultimately there can be a
parameter (cfg or command line) to control it.
1:46 p.m.
Hello,
On 9/28/11 12:31 PM, Henning Westerholt wrote:
On Wednesday 28 September 2011, Daniel-Constantin
Mierla wrote:
I agree, I expressed my
opinion for the case someone looks for backward
compatibility, so there can be added a parameter that will allow that.
At some point in the (near :-) ) future, we may want auto-discover for
IPv6 only, not for IPv4, because IPv4 will be sporadically used, just
for some very old and crappy SIP phones (we have today).
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
[default binding for IPv6]
Hi Daniel,
in my opinion the IPv6 behaviour should be consistent to the one in IPv4 -
this is probably what out users expect anyway. So if we really need another
cfg parameter for this, the default should be like in IPv4. Do you think this patch is of interest for 3.2
release?
can you push it in a personal branch to review the impact on the
existing code. It is of interest, of course, ultimately there can be a
parameter (cfg or command line) to control it.
1:48 p.m.
On Wednesday 28 September 2011, Daniel-Constantin Mierla wrote:
I agree, I expressed my opinion for the case someone
looks for backward
compatibility, so there can be added a parameter that will allow that.
Hi Daniel,
understand.
At some point in the (near :-) ) future, we may want
auto-discover for
IPv6 only, not for IPv4, because IPv4 will be sporadically used, just
for some very old and crappy SIP phones (we have today).
I'm looking forward to this time.. ;-)
Best regards,
Henning
1:47 p.m.
On 09/28/2011 01:24 PM, Daniel-Constantin Mierla wrote:
can you push it in a personal branch to review the
impact on the
existing code. It is of interest, of course, ultimately there can be a
parameter (cfg or command line) to control it.
Thanks,
Daniel
Hello Daniel,
Here it is
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=bcea195…
branch mariuszbihlei/ipv6_fix
Cheers,
Marius
--
Zbihlei Marius
Head of
Linux Development Services Romania
1&1 Internet Development srl Tel KA: 754-9512
Str Mircea Eliade 18 Tel RO: +40-31-223-9512
Sect 1, Bucuresti mailto: marius.zbihlei(a)1and1.ro
71295, Romania
11 Oct
11 Oct
11:44 a.m.
On 09/28/2011 01:24 PM, Daniel-Constantin Mierla wrote:
Hello Marius,
On 9/28/11 12:06 PM, marius zbihlei wrote:
can you push it in a personal branch to
review the impact on the
existing code. It is of interest, of course, ultimately there can be a
parameter (cfg or command line) to control it.
Hello Daniel,
I've added the auto_bind_ipv6 global (and cfg) parameter to
enable/disable ipv6 discovery. By default it is off.
As a side note, we can't use ipv6 functionality without this patch, so I
consider this to be quite a bug fix
If nobody objects, I will merge the branch into master tomorrow.
Cheers,
Marius
Thanks,
Daniel
--
Zbihlei Marius
Head of
Linux Development Services Romania
1&1 Internet Development srl Tel KA: 754-9512
Str Mircea Eliade 18 Tel RO: +40-31-223-9512
Sect 1, Bucuresti mailto: marius.zbihlei(a)1and1.ro
71295, Romania
4791
days inactive
4804
days old
8 comments
4 participants
participants (4)
-
Alexandr Dubovikov -
Daniel-Constantin Mierla -
Henning Westerholt -
marius zbihlei