16 Apr
2009
16 Apr
'09
12:20 a.m.
hello
I am using lcr and have 3 gws that I send the calls to, so far I am handling error
responses using "on_failure_route" and calling the next_gw function and it is
working fine.
But in cases when 1 of those gws is disconnnected or super busy and a 100 Trying is not
received in the first 3 - 5 seconds I would like to drop that call and use the next_gw.
Right now I have to wait until all retries fail to try the next gw, but that happens after
64*T1 = 32 seconds.
How can I accomplish that?
cheers
jp
16 Apr
16 Apr
12:42 a.m.
set fr_timer of tm module to 3 seconds to get fast trigger of failure route
regards
klaus
Juan Perez wrote:
hello
I am using lcr and have 3 gws that I send the calls to, so far I am handling error
responses using "on_failure_route" and calling the next_gw function and it is
working fine.
But in cases when 1 of those gws is disconnnected or super busy and a 100 Trying is not
received in the first 3 - 5 seconds I would like to drop that call and use the next_gw.
Right now I have to wait until all retries fail to try the next gw, but that happens after
64*T1 = 32 seconds.
How can I accomplish that?
cheers
jp
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
12:52 a.m.
txs a lot klaus, but that will be for all calls right?
, I did not mention that I have more gw groups, sorry, ... and I just want this to apply
to calls sent to gws on 1 group only.
but I saw this other parameter fr_timer_avp (string), I wonder If I can change the
variable when I am about to send the call to those gws only, then when I am sending the
calls to other gws that I can wait the normal time I can set it to the standard value. is
this possible?
regards
jp
----- Original Message ----
From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
To: Juan Perez <jperezsip2008(a)yahoo.com>
Cc: kamailio <users(a)lists.kamailio.org>
Sent: Wednesday, April 15, 2009 4:42:39 PM
Subject: Re: [Kamailio-Users] reducing T1 timer per route
set fr_timer of tm module to 3 seconds to get fast trigger of failure route
regards
klaus
Juan Perez wrote:
hello
I am using lcr and have 3 gws that I send the calls to, so far I am handling error
responses using "on_failure_route" and calling the next_gw function and it is
working fine.
But in cases when 1 of those gws is disconnnected or super busy and a 100 Trying is not
received in the first 3 - 5 seconds I would like to drop that call and use the next_gw.
Right now I have to wait until all retries fail to try the next gw, but that happens after
64*T1 = 32 seconds.
How can I accomplish that?
cheers
jp
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
2:14 a.m.
Before relaying the call, set the fr_timer_avp to the desired value.
This will give you the behavior that you are looking for.
Regards,
Ovidiu Sas
On Wed, Apr 15, 2009 at 5:52 PM, Juan Perez <jperezsip2008(a)yahoo.com> wrote:
txs a lot klaus, but that will be for all calls right?
, I did not mention that I have more gw groups, sorry, ... and I just want this to apply
to calls sent to gws on 1 group only.
but I saw this other parameter fr_timer_avp (string), I wonder If I can change the
variable when I am about to send the call to those gws only, then when I am sending the
calls to other gws that I can wait the normal time I can set it to the standard value. is
this possible?
regards
jp
----- Original Message ----
From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
To: Juan Perez <jperezsip2008(a)yahoo.com>
Cc: kamailio <users(a)lists.kamailio.org>
Sent: Wednesday, April 15, 2009 4:42:39 PM
Subject: Re: [Kamailio-Users] reducing T1 timer per route
set fr_timer of tm module to 3 seconds to get fast trigger of failure route
regards
klaus
Juan Perez wrote:
hello
I am using lcr and have 3 gws that I send the calls to, so far I am handling error
responses using "on_failure_route" and calling the next_gw function and it is
working fine.
But in cases when 1 of those gws is disconnnected or super busy and a 100 Trying is not
received in the first 3 - 5 seconds I would like to drop that call and use the next_gw.
Right now I have to wait until all retries fail to try the next gw, but that happens after
64*T1 = 32 seconds.
How can I accomplish that?
cheers
jp
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
4:44 p.m.
thank you a lot guys.
cheers
jp
----- Original Message ----
From: Ovidiu Sas <osas(a)voipembedded.com>
To: Juan Perez <jperezsip2008(a)yahoo.com>
Cc: Klaus Darilion <klaus.mailinglists(a)pernau.at>at>; kamailio
<users(a)lists.kamailio.org>
Sent: Wednesday, April 15, 2009 6:14:39 PM
Subject: Re: [Kamailio-Users] reducing T1 timer per route
Before relaying the call, set the fr_timer_avp to the desired value.
This will give you the behavior that you are looking for.
Regards,
Ovidiu Sas
On Wed, Apr 15, 2009 at 5:52 PM, Juan Perez <jperezsip2008(a)yahoo.com> wrote:
txs a lot klaus, but that will be for all calls right?
, I did not mention that I have more gw groups, sorry, ... and I just want this to apply
to calls sent to gws on 1 group only.
but I saw this other parameter fr_timer_avp (string), I wonder If I can change the
variable when I am about to send the call to those gws only, then when I am sending the
calls to other gws that I can wait the normal time I can set it to the standard value. is
this possible?
regards
jp
----- Original Message ----
From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
To: Juan Perez <jperezsip2008(a)yahoo.com>
Cc: kamailio <users(a)lists.kamailio.org>
Sent: Wednesday, April 15, 2009 4:42:39 PM
Subject: Re: [Kamailio-Users] reducing T1 timer per route
set fr_timer of tm module to 3 seconds to get fast trigger of failure route
regards
klaus
Juan Perez wrote:
hello
I am using lcr and have 3 gws that I send the calls to, so far I am handling error
responses using "on_failure_route" and calling the next_gw function and it is
working fine.
But in cases when 1 of those gws is disconnnected or super busy and a 100 Trying is not
received in the first 3 - 5 seconds I would like to drop that call and use the next_gw.
Right now I have to wait until all retries fail to try the next gw, but that happens after
64*T1 = 32 seconds.
How can I accomplish that?
cheers
jp
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
5705
days inactive
5706
days old
4 comments
3 participants
participants (3)
-
Juan Perez -
Klaus Darilion -
Ovidiu Sas