Setup:
jitsi --> kamailio <-----> pstn.gw
jitsi is registered using TCP SIP Trunk between kamailio and pstn.gw is using TCP
Initial invite from jitsi to kamailio is sent using TCP but invite sent from kamailio to pstn.gw is being sent with UDP.
How can I configure kamailio to send invite to pstn.gw with TCP?
Thank You
Hi Rajah, setting pstn.gw to "1.2.3.4;transport=tcp" should help. If you need to use some other port this should help "1.2.3.4:5080;transport=tcp"
Mit freundlichen Grüßen / Best regards
Marco Barthel
Robert Bosch GmbH (CI/AFU1) Postfach 30 02 20 70442 Stuttgart GERMANY www.bosch.comhttp://www.bosch.com
Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart, HRB 14000; Aufsichtsratsvorsitzender: Franz Fehrenbach; Geschäftsführung: Dr. Volkmar Denner, Dr. Stefan Asenkerschbaumer, Dr. Rolf Bulander, Dr. Stefan Hartung, Dr. Dirk Hoheisel, Christoph Kübel, Uwe Raschke, Wolf-Henning Scheider, Dr. Werner Struth, Peter Tyroller Von: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] Im Auftrag von Rajah Chowbay Gesendet: Sonntag, 15. Dezember 2013 01:06 An: sr-users@lists.sip-router.org Betreff: [SR-Users] Outbound Calls using pstn.gw_ip
Setup:
jitsi --> kamailio <-----> pstn.gwhttp://pstn.gw/
jitsi is registered using TCP SIP Trunk between kamailio and pstn.gwhttp://pstn.gw/ is using TCP
Initial invite from jitsi to kamailio is sent using TCP but invite sent from kamailio to pstn.gwhttp://pstn.gw/ is being sent with UDP.
How can I configure kamailio to send invite to pstn.gwhttp://pstn.gw/ with TCP?
Thank You
-
Barthel Marco (CI/AFU1) -
Rajah Chowbay