Dear Kamailio'ns,
I have configured kamailio (V 4.0) with RTPproxy server. Audio/Video call establishments are just fine. With this i have some unknown behaviour in my set-up is that When i am running kamailio server with RTPproxy instance, i am experiencing Jitter, Latency, pixelled audio/video calls. But when i run only Kamailio server without RTPproxy service running, audio/video calls are just fine (no any jitter, latency kind of issues). I also tried with Mediaproxy (AG projects) server but the results are same as like in Kamailio/RTPproxy case.
What could be the problem with this set-up ? How can i solve this issue ?
Please anybody help me in resolving this problem.
Any help will greatly appreciate.
Regards. Ravi.
Dear All,
Anybody has any clue about this issue.
Please help me.
Regards, Ravi
-- View this message in context: http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1... Sent from the Users mailing list archive at Nabble.com.
Hi, it looks like your platform/network is introducing jitter in RTP packets. Mediaproxy/rtpproxy usual introduce a very low jitter but it has no impact to performances at all.
It's hard to say, you should investigate in your platform first, and then in your network devices. For example, when are you using media-relay, do you receive packets already jittered ? If yes problem could come from some network devices in front of you mediaproxy.
Daniel
On 02/17/2014 07:12 PM, Wingsravi R wrote:
Dear Kamailio'ns,
I have configured kamailio (V 4.0) with RTPproxy server. Audio/Video call establishments are just fine. With this i have some unknown behaviour in my set-up is that When i am running kamailio server with RTPproxy instance, i am experiencing Jitter, Latency, pixelled audio/video calls. But when i run only Kamailio server without RTPproxy service running, audio/video calls are just fine (no any jitter, latency kind of issues). I also tried with Mediaproxy (AG projects) server but the results are same as like in Kamailio/RTPproxy case.
What could be the problem with this set-up ? How can i solve this issue ?
Please anybody help me in resolving this problem.
Any help will greatly appreciate.
Regards. Ravi.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
On Feb 21, 2014, at 4:24 AM, Daniel Grotti dgrotti@sipwise.com wrote:
Hi, it looks like your platform/network is introducing jitter in RTP packets. Mediaproxy/rtpproxy usual introduce a very low jitter but it has no impact to performances at all.
It's hard to say, you should investigate in your platform first, and then in your network devices. For example, when are you using media-relay, do you receive packets already jittered ? If yes problem could come from some network devices in front of you mediaproxy.
Are you trying to run on virtualization? You might be having CPU contention issues.
--FC
Dear Frank,
thank you for the response.
Are you trying to run on virtualization? You might be having CPU
contention issues.
No im not running on Virtualisation. My set-up is as mentioned in previous mail.
please help me in resolving this issues.
Regards, Ravi
-- View this message in context: http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1... Sent from the Users mailing list archive at Nabble.com.
Dear Daniel,
Thank you for the reply,
What you are saying is right, but my problem with this set-up is, without running rtpproxy server instance, only with running kamailio server everything (audio/video) is just go fine. But when i start RTPproxy server to achieve NAT traversal, audio/video calls are going badly with pixelled video and latency, voice break kind of issues with audio.
And my system set-up is like this : Runing both Kamailio and RTPproxy in same machine on ubuntu (12.04) platform. And i am working on Intranet infrastructure, so both the Rtpproxy server and kamailio listening on Private IP address.
Can you please tel me how can i check jitter levels and RTP packet loss before reaching RTPproxy server in my network ? Anything can be done on RTPproxy server ?
Please help me in resoloving this issues.As i am new to this kind of networking concepts.
Awaiting replies.
Regards, Ravi
-- View this message in context: http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1... Sent from the Users mailing list archive at Nabble.com.
Hi Ravi, yes it means that when RTP traffic passes through your media-relay you have traffic, if you don't use media-realy RTP traffic is end-to-end between clients.
To check jitter and other values you can capture your SIP/RTP traffic on your kamailio server with "tcpdump" for example and analyze the call with wireshark. In particular, analyzing RTP traffic you will be able to see jitter value between Client A->rtpproxy and rtpproxy->Client B. So you can check if the traffic is already jittered or not. If not, it means that your server is adding jitter.
Daniel
On Friday, February 21, 2014 18:36 CET, Ravi wingsravi777@gmail.com wrote:
Dear Daniel,
Thank you for the reply,
What you are saying is right, but my problem with this set-up is, without running rtpproxy server instance, only with running kamailio server everything (audio/video) is just go fine. But when i start RTPproxy server to achieve NAT traversal, audio/video calls are going badly with pixelled video and latency, voice break kind of issues with audio.
And my system set-up is like this : Runing both Kamailio and RTPproxy in same machine on ubuntu (12.04) platform. And i am working on Intranet infrastructure, so both the Rtpproxy server and kamailio listening on Private IP address.
Can you please tel me how can i check jitter levels and RTP packet loss before reaching RTPproxy server in my network ? Anything can be done on RTPproxy server ?
Please help me in resoloving this issues.As i am new to this kind of networking concepts.
Awaiting replies.
Regards, Ravi
-- View this message in context: http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1... Sent from the Users mailing list archive at Nabble.com.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Dear Daniel,
thank you very much for the reply,
As you suggested i did sip/rtp traffic analysis using tcpdump and wireshark captures. Using Wireshark, i tried to analyse RTP packet loss and it is as follows: 1) Client A to RTPproxy Total RTP packets Sent: 1776 , RTP packets lost : 1060 (59.68%), Mean Jitter: 25ms
2) RTPproxy to Client B Total RTP packets Sent: 1776 , RTP packets lost : 1060 (59.68%), Mean Jitter: 25ms
client A ------59.68%------> RTPproxy ------59.68%------> Client B
It seems like RTP packets are dropped before they reached RTPproxy server, With this i should have to look into my hardware between Client A to RTPproxy right ? And with this i have one more question that :(Sorry if it is silly question, I am newbie in this) How that RTP packets sent and lost ratios are same before and after RTPproxy server ? i mean If Packets are dropping before reaching RTPproxy ,then RTPproxy has suppose to forward the packets as much it recieves (i.e Recieved packets= Packets sent - Packets lost). but then how this before and after RTPproxy Packets ratio is same ?
And i have attached Tcpdump based SIP captures for your better understanding. Also find my Kamailio config file and please suggest me about anything can be done on script level to fine tune this issue ?
Please help me in resolving this issue.
Awaiting your reply,
Regards, Ravi
On Fri, Feb 21, 2014 at 11:23 PM, Daniel Grotti-4 [via SIP Router] < ml-node+s1086192n125260h50@n5.nabble.com> wrote:
Hi Ravi, yes it means that when RTP traffic passes through your media-relay you have traffic, if you don't use media-realy RTP traffic is end-to-end between clients.
To check jitter and other values you can capture your SIP/RTP traffic on your kamailio server with "tcpdump" for example and analyze the call with wireshark. In particular, analyzing RTP traffic you will be able to see jitter value between Client A->rtpproxy and rtpproxy->Client B. So you can check if the traffic is already jittered or not. If not, it means that your server is adding jitter.
Daniel
On Friday, February 21, 2014 18:36 CET, Ravi <[hidden email]http://user/SendEmail.jtp?type=node&node=125260&i=0> wrote:
Dear Daniel,
Thank you for the reply,
What you are saying is right, but my problem with this set-up is,
without
running rtpproxy server instance, only with running kamailio server everything (audio/video) is just go fine. But when i start RTPproxy
server
to achieve NAT traversal, audio/video calls are going badly with
pixelled
video and latency, voice break kind of issues with audio.
And my system set-up is like this : Runing both Kamailio and RTPproxy in same machine on ubuntu (12.04) platform. And i am working on Intranet infrastructure, so both the
Rtpproxy
server and kamailio listening on Private IP address.
Can you please tel me how can i check jitter levels and RTP packet loss before reaching RTPproxy server in my network ? Anything can be done on RTPproxy server ?
Please help me in resoloving this issues.As i am new to this kind of networking concepts.
Awaiting replies.
Regards, Ravi
-- View this message in context:
http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1...
Sent from the Users mailing list archive at Nabble.com.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://user/SendEmail.jtp?type=node&node=125260&i=1 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://user/SendEmail.jtp?type=node&node=125260&i=2 http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
If you reply to this email, your message will be added to the discussion below:
http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1... To unsubscribe from RTPProxy/Mediaproxy issue, click herehttp://sip-router.1086192.n5.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=125121&code=d2luZ3NyYXZpNzc3QGdtYWlsLmNvbXwxMjUxMjF8ODE2NDY2MjA2 . NAMLhttp://sip-router.1086192.n5.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml
kamailio.cfg (43K) http://sip-router.1086192.n5.nabble.com/attachment/125289/0/kamailio.cfg videocallWithrtpproxy.pcap (54K) http://sip-router.1086192.n5.nabble.com/attachment/125289/1/videocallWithrtpproxy.pcap videocallWithoutrtpproxy.pcap (31K) http://sip-router.1086192.n5.nabble.com/attachment/125289/2/videocallWithoutrtpproxy.pcap
-- View this message in context: http://sip-router.1086192.n5.nabble.com/RTPProxy-Mediaproxy-issue-tp125121p1... Sent from the Users mailing list archive at Nabble.com.
-
Daniel Grotti -
Frank Carmickle -
Ravi -
Wingsravi R