New subject: [Serusers] messed up with config

13 Feb 2004

      restart ser and reboot the phones too...u must have done it once ...empty 
location table also...and see ngrep output
...
From: "Madan" madan.r@net4india.net
To: "Kapil Dhawan" sersavvy@hotmail.com
Subject: Re: [Serusers] messed up with config
Date: Fri, 13 Feb 2004 13:57:28 +0530
noisy feedback and too many hops
----- Original Message -----
From: "Kapil Dhawan" sersavvy@hotmail.com
To: madan.r@net4india.net
Cc: serusers@lists.iptel.org
Sent: Friday, February 13, 2004 1:40 PM
Subject: RE: [Serusers] messed up with config
...
whats the error you are getting
...
From: "Madan" madan.r@net4india.net
To: serusers@lists.iptel.org
Subject: [Serusers] messed up with config
Date: Fri, 13 Feb 2004 13:36:23 +0530
hi
can somebody tell whats wrong with my cfg , as i can not make/recieve
calls
...
...
now..seems i have played too much it and now m confused as to what went
wrong and where
#
# ----------- global configuration parameters ------------------------
debug=9         # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
listen=localhost
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/group_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode",   2)
modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("auth_radius", "service_type", 15)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("acc", "log_level", 1)
modparam("acc", "radius_flag", 1)
# -------------------------  request routing logic -------------------
# main routing logic
route{
        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
    record_route();

    # loose-route processing
    if (loose_route())
    {
            t_relay();
            break;
    };

# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
        if (uri==myself)
        {
               lookup("aliases");
           if (method=="REGISTER") {

                   log(1, "REGISTER: Authenticating user\n");

                   if (!radius_www_authorize("")) {
                           log(1, "REGISTER: challenging user\n");
                           www_challenge("", "0");
                           break;
                   };
                   save("location");
                   break;
           };

###########################################################################
###############################
...
...
            if (uri=~"^sip:44[127][0-9]+@.*")
            {

                    if (rewritehostport("pstnrouter:5060"))
                    {
                            if (!t_relay())
                            {
                                    sl_reply_error();
                            };

                    }
                    break;
            }
            else if (uri=~"^sip:01[0-9]+@.*")
            {
                    if (!t_relay())
                    {
                            sl_reply_error();
                    };
                    break;
            };

            # account completed transactions via syslog
            setflag(1);
    }

###########################################################################
####################################
...
...
    if (method=="INVITE") {

            log(1, "INVITE\n");
            setflag(1); /* set for accounting (the same value as 

in
...
...
log_flag!) */
        };
    if (method=="MESSAGE") {
            log(1, "MESSAGE\n");
            setflag(1); /* set for accounting (the same value as 

in
...
...
log_flag!) */
        };
    if (method=="BYE" || method=="CANCEL") {
            log (1, "BYE or CANCEL\n");
            setflag(1);
    };

    # native SIP destinations are handled using our USRLOC DB
    if (!lookup("location")) {
            sl_send_reply("404", "Not Found");
            break;
    };
    if (!t_relay()) {
            sl_reply_error();
            break;
    };

}
_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers

Masterpieces made affordable! Buy art prints.
http://go.msnserver.com/IN/42736.asp MSN Shopping.
_________________________________________________________________
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag 
Only on www.shaadi.com. Register now!