Hi,
Do you guys know about any hardphone that support Speex and iLBC codec? Most of the hardphone in market support G723, G711 and G729.
Thanks, MOhammad
Original Message: ----------------- From: Jorge Crichigno jcrichigno@conexion.com.py Date: Fri, 27 May 2005 16:03:23 -0400 To: jh@tutpro.com, serusers@iptel.org Subject: Re: [Serusers] G723.1 vs G729
Yes, iLBC has the following variants:
------------------------------------------------------------------- iLBC - 30 ms (one packet each 30 ms)
RTP payload: 50 bytes --> Transmition rate: 13.3 Kbps RTP: 62 bytes UDP: 70 bytes IP: 90 bytes --> Transmition rate: 24 Kbps
------------------------------------------------------------------- iLBC - 20 ms (one packet each 20 ms)
RTP payload: 38 bytes --> Transmition rate: 15.2 Kbps RTP: 50 bytes UDP: 58 bytes IP: 78 bytes --> Transmition rate: 31.2 Kbps
-------------------------------------------------------------------
El vie, 27-05-2005 a las 09:45, Juha Heinanen escribió:
Jorge Crichigno writes:
In the following link there is a comparison between some codecs
iLBC has also 20 ms mode which is not listed in the table.
-- juha
_______________________________________________ Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers
-------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .
info@beeplove.com writes:
Do you guys know about any hardphone that support Speex and iLBC codec? Most of the hardphone in market support G723, G711 and G729.
grandstream and snom, for example, have iLBC support. i have been told that iLBC is also on sipura roadmap, but who knows what will happen to that after the cisco deal. i have also heard rumors that iLBC support is coming to cisco ios, mainly because iLBC was chosen for cable tv terminals.
-- juha
-
info＠beeplove.com -
Juha Heinanen