22 Sep
2004
22 Sep
'04
6:09 p.m.
Hi,
I have setup a server with the default config and my topology is as follows:
192.168.10.2 (my PC with SJPhone)
192.168.10.20 (ZyXEL Prestige 2000W)
192.168.10.50 (IPTel SER 0.8.14 src)
Both phones register fine.
When I make a call all packets traverse fine ... phones ring ... I pick up the phone and
no sound.....
I know both phones work as I have had them running through asterisk without issues.
Here is a tcpdump from my PC:
djs:/home/dave # tcpdump -n net 192.168.10.0/24
tcpdump: listening on eth0
16:07:39.941268 192.168.10.2.5060 > 192.168.10.50.5060: udp 625 (DF)
16:07:39.942286 192.168.10.50.5060 > 192.168.10.2.5060: udp 583 (DF) [tos 0x10]
16:07:42.347992 192.168.10.50.5060 > 192.168.10.2.5060: udp 481 (DF) [tos 0x10]
16:07:43.157053 192.168.10.50.5060 > 192.168.10.2.5060: udp 481 (DF) [tos 0x10]
16:07:44.933756 arp who-has 192.168.10.2 tell 192.168.10.50
16:07:44.933787 arp reply 192.168.10.2 is-at 0:50:fc:72:48:a7
16:07:51.478977 192.168.10.50.5060 > 192.168.10.2.5060: udp 728 (DF) [tos 0x10]
16:07:51.483097 192.168.10.2.5060 > 192.168.10.50.5060: udp 493 (DF)
16:07:51.617704 arp who-has 192.168.10.2 tell 192.168.10.20
16:07:51.617742 arp reply 192.168.10.2 is-at 0:50:fc:72:48:a7
16:07:51.624504 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.649217 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.664914 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.696964 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.728381 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.760793 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.792979 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.824425 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.857219 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.889120 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.904975 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.937186 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.968744 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.000985 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.032817 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.064412 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
No matter which phone I make the call from packets only go like above from the ZyXEL to
the SJPhone PC.
Am I right in thinking that packets should go both ways??
Any other ideas as to why I have no sound?
Pulling my hair out on this one :)
Cheers,
Dave
23 Sep
23 Sep
7:15 p.m.
Hi Guys,
Could someone just confirm my question about packet direction? Should it be
that packets go both from and to the phones or just one way?
Many Thanks,
Dave
On Wednesday 22 September 2004 16:09, David Simmons wrote:
Hi,
I have setup a server with the default config and my topology is as
follows:
192.168.10.2 (my PC with SJPhone)
192.168.10.20 (ZyXEL Prestige 2000W)
192.168.10.50 (IPTel SER 0.8.14 src)
Both phones register fine.
When I make a call all packets traverse fine ... phones ring ... I pick up
the phone and no sound.....
I know both phones work as I have had them running through asterisk without
issues.
Here is a tcpdump from my PC:
djs:/home/dave # tcpdump -n net 192.168.10.0/24
tcpdump: listening on eth0
16:07:39.941268 192.168.10.2.5060 > 192.168.10.50.5060: udp 625 (DF)
16:07:39.942286 192.168.10.50.5060 > 192.168.10.2.5060: udp 583 (DF) [tos
0x10] 16:07:42.347992 192.168.10.50.5060 > 192.168.10.2.5060: udp 481 (DF)
[tos 0x10] 16:07:43.157053 192.168.10.50.5060 > 192.168.10.2.5060: udp 481
(DF) [tos 0x10] 16:07:44.933756 arp who-has 192.168.10.2 tell 192.168.10.50
16:07:44.933787 arp reply 192.168.10.2 is-at 0:50:fc:72:48:a7
16:07:51.478977 192.168.10.50.5060 > 192.168.10.2.5060: udp 728 (DF) [tos
0x10] 16:07:51.483097 192.168.10.2.5060 > 192.168.10.50.5060: udp 493 (DF)
16:07:51.617704 arp who-has 192.168.10.2 tell 192.168.10.20
16:07:51.617742 arp reply 192.168.10.2 is-at 0:50:fc:72:48:a7
16:07:51.624504 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.649217 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.664914 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.696964 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.728381 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.760793 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.792979 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.824425 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.857219 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.889120 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.904975 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.937186 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.968744 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.000985 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.032817 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.064412 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
No matter which phone I make the call from packets only go like above from
the ZyXEL to the SJPhone PC.
Am I right in thinking that packets should go both ways??
Any other ideas as to why I have no sound?
Pulling my hair out on this one :)
Cheers,
Dave
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
24 Sep
24 Sep
1:22 p.m.
New subject: [Serusers] May users have 2 phone numbers ?
Hello,
I will use X-Lite and some GrandStream SIP phone in my VoIP solution.
I know users can write URI to phone another user via X-Lite. But they can
only use digits to phone via SIP phone.
Is it possible to have two phone IDs : an URI (such as an e-mail address)
and a digit phone number ?
Thanks in advance
Gwen
1:44 p.m.
New subject: [Serusers] May users have 2 phone numbers ?
You can set the second ID as alias.
Daniel
On 9/24/2004 12:22 PM, g.billoudet(a)arwen-tech.fr wrote:
Hello,
I will use X-Lite and some GrandStream SIP phone in my VoIP solution.
I know users can write URI to phone another user via X-Lite. But they can
only use digits to phone via SIP phone.
Is it possible to have two phone IDs : an URI (such as an e-mail address)
and a digit phone number ?
Thanks in advance
Gwen
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
2:20 p.m.
New subject: [Serusers] May users have 2 phone numbers ?
Thanks Daniel,
I don't really understand...
In which config file do I set the alias as a second ID ?
By the way, which alias are you talking about ? I thought the aliases were
the "names" of the server ?
Gwen
You can set the second ID as alias.
Daniel
On 9/24/2004 12:22 PM, g.billoudet(a)arwen-tech.fr wrote:
Hello,
I will use X-Lite and some GrandStream SIP phone in my VoIP solution.
I know users can write URI to phone another user via X-Lite. But they can
only use digits to phone via SIP phone.
Is it possible to have two phone IDs : an URI (such as an e-mail address)
and a digit phone number ?
Thanks in advance
Gwen
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
2:26 p.m.
New subject: [Serusers] May users have 2 phone numbers ?
On 9/24/2004 1:20 PM, g.billoudet(a)arwen-tech.fr wrote:
Thanks Daniel,
I don't really understand...
In which config file do I set the alias as a second ID ?
There is a table aliases where you can set aliases for users -- then you
have to use lookup("aliases") into configuration file. See the mail
archive for more and read
http://www.iptel.org/ser/doc/seruser/seruser.html#AEN852
By the way, which alias are you talking about ? I
thought the aliases were
the "names" of the server ?
This is also true, but is something different.
Daniel
Gwen
You can set the second ID as alias.
Daniel
On 9/24/2004 12:22 PM, g.billoudet(a)arwen-tech.fr wrote:
>Hello,
>
>I will use X-Lite and some GrandStream SIP phone in my VoIP solution.
>
>I know users can write URI to phone another user via X-Lite. But they can
>only use digits to phone via SIP phone.
>
>Is it possible to have two phone IDs : an URI (such as an e-mail address)
>and a digit phone number ?
>
>
>Thanks in advance
>
>Gwen
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>
>
2:35 p.m.
New subject: [Serusers] May users have 2 phone numbers ?
Thank you very much :-)
Gwen
On 9/24/2004 1:20 PM, g.billoudet(a)arwen-tech.fr wrote:
Thanks Daniel,
I don't really understand...
In which config file do I set the alias as a second ID ?
There is a table aliases where you can set aliases for users -- then you
have to use lookup("aliases") into configuration file. See the mail
archive for more and read
http://www.iptel.org/ser/doc/seruser/seruser.html#AEN852
By the way, which alias are you talking about ? I
thought the aliases
were
the "names" of the server ?
This is also true, but is something different.
Daniel
Gwen
You can set the second ID as alias.
Daniel
On 9/24/2004 12:22 PM, g.billoudet(a)arwen-tech.fr wrote:
>Hello,
>
>I will use X-Lite and some GrandStream SIP phone in my VoIP solution.
>
>I know users can write URI to phone another user via X-Lite. But they
> can
>only use digits to phone via SIP phone.
>
>Is it possible to have two phone IDs : an URI (such as an e-mail
> address)
>and a digit phone number ?
>
>
>Thanks in advance
>
>Gwen
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
>
>
2:28 p.m.
New subject: Re[2]: [Serusers] May users have 2 phone numbers ?
Hello g,
Friday, September 24, 2004, 2:20:17 PM, you wrote:
gbatf> Thanks Daniel,
gbatf> I don't really understand...
gbatf> In which config file do I set the alias as a second ID ?
gbatf> By the way, which alias are you talking about ? I thought the aliases were
gbatf> the "names" of the server ?
gbatf> Gwen
> You can set the second ID as alias.
>
> Daniel
>
> On 9/24/2004 12:22 PM, g.billoudet(a)arwen-tech.fr wrote:
>
>>Hello,
>>
>>I will use X-Lite and some GrandStream SIP phone in my VoIP solution.
>>
>>I know users can write URI to phone another user via X-Lite. But they can
>>only use digits to phone via SIP phone.
>>
>>Is it possible to have two phone IDs : an URI (such as an e-mail address)
>>and a digit phone number ?
>>
>>
>>Thanks in advance
>>
>>Gwen
To add new alias to existing endpoint use command:
serctl alias add <alias> <uri>
example (sectl alias add john 65498@yourserver )
Also you need to have this line in your ser.cfg:
lookup('aliases')
Hope this will help.
--
Best regards,
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,.
Mike Tkachuk, ph:380-3433-47067
YES ISP, fx:380-3433-47067
Valova 17, mike|a|yes.net.ua
Kolomyia, www.yes.net.ua
Ukraine 78200 FWD: 66518
24.09.2004
ICQ# 57698805
MSN: mike_tkachuk|a|hotmail.com
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,.
7369
days inactive
7371
days old
7 comments
4 participants
participants (4)
-
Daniel-Constantin Mierla -
David Simmons -
g.billoudet＠arwen-tech.fr -
Mike Tkachuk